Residual stress engineering by low transformation temperature alloys—state of the art and recent developments
详细信息 查看全文
- 作者：Arne Kromm (1)
Jonny Dixneit (1)
Thomas Kannengiesser (1) - 关键词：Residual stresses ; Martensite ; Low temperature ; Transformation
- 刊名：Welding in the World
- 出版年：2014
- 出版时间：September 2014
- 年：2014
- 卷：58
- 期：5
- 页码：729-741
- 全文大小：636 KB
- 参考文献：1. Kromm A, Kannengiesser T, Gibmeier J, Genzel C, van der Mee V (2009) Determination of residual stresses in low transformation temperature (LTT-) weld metals using X-ray and high energy synchrotron radiation. Weld World 53:3-6 CrossRef
2. Nakamura T, Hiraoka K, Zenitani S (2008) Improvement of MIG welding stability in pure Ar shielding gas using small amount of oxygen and coaxial hybrid solid wire. Sci Technol Weld Join 13:25-2 CrossRef
3. Ohta A, Watanabe O, Matsuoka K, Shiga C, Nishijima S, Maeda Y, Suzuki N, Kubo T (1999) Fatigue strength improvement by using newly developed low transformation temperature welding material. Weld World 43:38-2
4. Martinez Diez F (2008) Development of compressive residual stress in structural steel weld toes by means of weld metal phase transformations. Weld World 52:63-8 CrossRef
5. Francis JA, Stone HJ, Kundu S, Rogge RB, Bhadeshia HKDH, Withers PJ (2007) Transformation temperatures and welding residual stresses in ferritic steels. Proceedings of PVP2007, ASME Pressure Vessels and Piping Division Conference, San Antonio, July 22-6 2007, USA, PVP2007-26544, ASME, pp 1-
6. Wohlfahrt H, Macherauch E (1977) Die Ursachen des Schwei?eigenspannungszustandes. Materialprüfung 19:272-80 (In German)
7. Wohlfahrt H (1986) Die Bedeutung der Austenitumwandlung für die Eigenspannungs-entstehung beim Schwei?en. H?rterei Technische Mitteilungen 41:248-57 (In German)
8. Nitschke-Pagel T, Wohlfahrt H (2002) Residual stresses in welded joints—sources and consequences. Mater Sci Forum 404-07:215-26 CrossRef
9. Jones WKC, Alberry PJ (1977) A model for stress accumulation in steels during welding. In: Residual stresses in welded construction and their effects. International conference, London, 15-7 November 1977, Volume 1—papers. The Welding Institute, Abington, pp 15-6
10. Satoh K (1972) Thermal stresses developed in high-strength steel subjected to thermal cycles simulating weld heat-affected zone. Trans Japan Weld Soc 3:135-42
11. Bühler H, Scheil E (1933) Zusammenwirken von W?rme- und Umwandlungsspannungen in abgeschreckten St?hlen. Archiv des Eisenhüttenwesens 7:283-88 (in German)
12. Bhadeshia HKDH (2004) Developments in martensitic and bainitic steels: role of the shape deformation. Mater Sci Eng A 378:34-9 CrossRef
13. Ohta A, Suzuki N, Maeda Y, Hiraoka K, Nakamura T (1999) Superior fatigue crack growth properties in newly developed weld metal. Int J Fatigue 21:113-18 CrossRef
14. Ohta A, Suzuki N, Maeda Y (2000) Doubled fatigue strength of box welds by using low transformation temperature welding material. In: Meike A, Gonis A, Turchi P, Rajan K (eds) Properties of complex inorganic solids 2. Kluwer Academic/Plenum, New York, pp 401-08. ISBN 0306464985
15. Ohta A, Watanabe O, Matsuoka K, Maeda Y, Suzuki N, Kubo T (2000) Fatigue strength improvement of box welds by low transformation temperature welding wire and PWHT. Weld World 44:52-6
16. Ohta A, Maeda Y, Suzuki N (2001) Fatigue life extension by repairing fatigue cracks initiated around box welds with low transformation temperature welding wire. Weld World 45:3-
17. Ohta A, Matsuoka K, Nguyen N, Maeda Y, Suzuki N (2003) Fatigue strength improvement of lap joints of thin steel plate using low transformation-temperature welding wire. Weld J 82:78-3
18. Ohta A, Suzuki N, Maeda Y, Maddox S (2003) Fatigue strength improvement of lap welded joints by low transformation temperature welding wire—superior improvement with strength of steel. Weld World 47:38-3 CrossRef
19. Suzuki N, Ohta A, Maeda Y (2004) Repair of fatigue cracks initiated around a box welds using low transformation temperature welding material. Weld Int 18:112-17 CrossRef
20. Miki C, Anami K (2001) Fatigue strength improvement of welded joints using low temperature transformation welding materials. Festigkeit von Schweissverbindungen; Forschungsberichte des Instituts für Schweisstechnik; Technische Universit?t Braunschweig, Band 1, Shaker, Aachen, pp 161-73. ISBN 3-8265-8598-4
21. Miki C, Homma K, Tominaga T (2002) High strength and high performance steels and their use in bridge structures. J Constr Steel Res 58:3-0 CrossRef
22. Mohri M, Sakano M, Arakawa K, Kubo T, Morikage Y (2004) Fatigue strength improvement on non-load carrying type cruciform welded joint by the low transformation welding wire and effect of compressive over-loading. Weld Res Abroad XLX:32-3
23. Wang W, Huo L, Zhang Y, Wang D, Jing H (2002) New developed welding electrode for improving the fatigue strength of welded joints. J Mater Sci Technol 18:527-31
24. Wang W, Huo L, Wang D, Zhang Y, Jing H, Yang X (2003) Improving the fatigue performance of longitudinal welded joints by low transformation temperature electrodes. China Weld 12:34-8
25. Lixing H, Dongpo W, Wenxian W, Yufeng Z (2004) Ultrasonic peening and low trans-formation temperature electrodes used for improving the fatigue strength of welded joints. Weld World 48:34-9 CrossRef
26. Eckerlid J, Nilsson T, Karlsson L (2003) Fatigue properties of longitudinal attachments welded using low transformation temperature filler. Sci Technol Weld Join 8:353-59 CrossRef
27. Barsoum Z, Gustafsson M (2009) Fatigue of high strength steel joints welded with low temperature transformation consumables. Eng Fail Anal 16:2186-194 CrossRef
28. Barsoum Z, Gustafsson M (2007) Spectrum fatigue of high strength steel joints welded with low temperature transformation consumables. International Conference on Fatigue Design, November 21-2, 2007, Senlis, France, pp 1-0
29. Darcis PP, Katsumoto H, Payares-Asprino MC, Liu S, Siewert TA (2007) Cruciform fillet welded joint fatigue strength improvement by weld metal phase transformations. Fatigue Fract Eng Mater Struct 31:125-36 CrossRef
30. Payares-Asprino MC, Katsumoto H, Liu S (2008) Effect of martensite start and finish temperature on residual stress development in structural steel welds. Weld J 87:279-89
31. Shiga C (1999) Systematic approach to solution of welding problems in STX21 project: aiming for remarkable advances in welded joints. Sci Technol Weld Join 5:356-64 CrossRef
32. Zenitani S, Hayakawa N, Yamamoto J, Hiraoka K, Shiga C, Morikage Y, Kubo T, Yasuda K (2003) Prevention of cold cracking in high strength steel welds by applying newly developed low transformation-temperature welding consumables. 6th International Trends in Welding Research Conference Proceedings, 15-9 April 2002, Pine Mountain, USA, ASM International, pp 569-74
33. Kannengiesser T, Boellinghaus T (2013) Cold cracking tests—an overview of present technologies and applications. Weld World 57:3-7 CrossRef
34. Hayakawa N, Zenitani S, Yamamoto J, Nakamura T, Hiraoka K, Morikage Y, Kubo T, Yasuda K (2004) Applicability of low transformation-temperature welding consumables to high strength welded joint. Weld Res Abroad XLX:21-7
35. Zenitani S, Hayakawa N, Yamamoto J, Hiraoka K, Morikage Y, Kubo T, Yasada K, Amano K (2007) Development of new low transformation-temperature welding consumable to prevent cold cracking in high strength steel welds. Sci Technol Weld Join 12:516-22
36. Kromm A, Kannengiesser T (2011) Characterising phase transformations of different LTT alloys and their effect on residual stresses and cold cracking. Weld World 55:48-6 CrossRef
37. Martinez F, Liu S, Edwards G (2004) The development of a compressive residual stress around a structural steel weld by means of phase transformation. Proceedings from Joining of Advanced and Speciality Materials, October 18-0, Columbus, Ohio, 2004, pp 42-8
38. Martinez F, Liu S (2005) Development of compressive residual stress in structural steel weld toes by means of weld metal phase transformations. Proceedings of the 7th International Conference on Trends in Welding Research, May 16-0, Callaway Gardens Resort, Pine Mountain, Georgia, USA pp 583-88
39. Martinez Diez F (2004) Development of compressive residual stress in structural steel weld toes by means of weld metal phase transformations. Thesis (Ph.D.), Colorado School of Mines
40. Mikami Y (2010) HENRY GRANJON PRIZE COMPETITION 2011 Winner Category C: “design and structural integrity-numerical analysis of weld distortion considering phase transformation effects. Weld World 54:97-07 CrossRef
41. Mikami Y, Mochizuki M, Toyoda M (2007) In-process control of weld distortion by using phase transformation effects. In: Cerjak H, Bhadeshia HKDH, Kozeschnik E (eds) Mathematical modelling of weld phenomena 8. Verlag der Technischen Universit?t Graz, Graz, pp 981-001. ISBN 978-3-902465-69-6
42. Mikami Y, Morikage Y, Mochizuki M, Toyoda M (2005) Numerical simulation of welding distortions of T-joints with low-temperature transformation welding wire. 1st International Conference on Distortion Engineering 2005, pp 453-60
43. Mochizuki M, Toyoda M, Kubo T, Morikage Y (2004) Residual stress reduction by using weld metal with property of low-temperature phase transformation. Residual stress, fracture, and stress corrosion cracking, San Diego, July 25-9 2004, USA, PVP-Vol. 479, PVP2004-2650, ASME, pp 77-3
44. Yamamoto J, Meguro S, Muramatsu Y, Hayakawa N, Hiraoka K (2009) Analysis of martensite transformation behaviour in welded joints of low transformation-temperature materials. Weld Int 23:411-21 CrossRef
45. Kromm A (2012) HENRY GRANJON PRIZE COMPETITION 2011 Winner Category B: “materials behaviour and weldability-exploring the interaction of phase transformation and residual stress during welding by synchrotron diffraction. Weld World 56:2-1 CrossRef
46. Kromm A, Kannengiesser T, Altenkirch J, Gibmeier J (2011) Residual stresses in multilayer welds with different martensitic transformation temperatures analyzed by high-energy synchrotron diffraction. Mater Sci Forum 681:37-2 CrossRef
47. Kannengiesser T, Rethmeier M, Portella P, Ewert U, Redmer B (2011) Assessment of hot cracking behaviour in welds. Int J Mater Res 8:1001-006
48. Kromm A (2011) Umwandlungsverhalten und Eigenspannungen beim Schwei?en neuartiger LTT-Zusatzwerkstoffe. Dissertation, BAM-Dissertationsreihe Band 72, Berlin 2011, ISBN: 1613-4249. (In German). http://www.bam.de/de/service/publikationen/publikationen_medien/dissertationen/diss_72_vt.pdf. 10 Apr 2014
49. Mikami Y, Mochizuki M, Toyoda M, Morikage Y (2006) Measurement and numerical simulation of angular distortion of fillet welded T-joints—welding angular distortion control by transformation expansion of weld metals (report 1). Weld Int 21:547-60
50. Mikami Y, Morikage Y, Mochizuki M, Toyoda M (2009) Angular distortion of fillet welded T joint using low transformation temperature welding wire. Sci Technol Weld Join 14:97-05 CrossRef
51. Morikage Y, Kubo T, Yasuda K, Amano K, Mikami Y, Mochizuki M, Toyoda M (2005) Welding-distortion phenomena of T-joint using low-temperature transformation welding wire. 1st International Conference on Distortion Engineering 2005, pp 447-52
52. Shirzadi AA, Bhadeshia HKDH, Karlsson L, Withers PJ (2009) Stainless steel weld metal designed to mitigate residual stresses. Sci Technol Weld Join 14:559-65 CrossRef
53. Mochizuki M, Matsushima S, Toyoda M, Morikage Y, Kubo T (2005) Study of residual stress reduction in welded joints using phase transformation behaviour of welding material. Studies on numerical simulation of temperature, microstructure, and thermal stress histories during welding and their application to welded structures (2nd report). Weld Int 19:773-82 CrossRef
54. Yamamoto J, Hiraoka K, Mochizuki M (2010) Analysis of martensite transformation behaviour in welded joint using low transformation-temperature welding wire. Sci Technol Weld Join 15:104-10 CrossRef
55. Murakawa H, Beres M, Davies CM, Rashed S, Vega A, Tsunori M, Nikbin KM, Dye D (2010) Effect of low transformation temperature weld filler metal on welding residual stress. Sci Technol Weld Join 15:393-98 CrossRef
56. Murakawa H, Beres M, Vega A, Rashed S, Davies CM, Dye D, Nikbin KM (2008) Effect of phase transformation onset temperature on residual stress in welded thin steel plates. Trans JWRI 37:75-0
57. Mochizuki M, Mikami M, Iyota M, Inoue H, Kasuya T (2009) Effect of low temperature transformation expansion on the restraint stress of high strength steel welds. Proceedings of the Nineteenth International Offshore and Polar Engineering Conference, Osaka, Japan, June 21-6, pp 464-68
58. Mikami Y, Nakamura M, Mochizuki M, Toyada M (2009) Effect of transformation temperature and restraint intensity on the reduction of restraint stress by transformation expansion. Q J Japan Weld Soc 27:235-39 CrossRef
59. Kromm A, Kannengiesser T (2014) Effect of martensitic phase transformation on stress build-up during multilayer welding. Mater Sci Forum 768-69:660-67
60. Dai H, Mark AF, Moat R, Withers PJ (2010) Investigation of transformation induced plasticity and residual stress analysis in stainless steel welds. Proceedings of the ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference PVP 2010, July 18-2, 2010, Bellevue, Washington, USA, pp 1325-332
61. Deng D, Murakawa H (2013) Influence of transformation induced plasticity on simulated results of welding residual stress in low temperature transformation steel. Comput Mater Sci 78:55-2 CrossRef
62. Dai H, Moat R, Withers PJ (2011) Modelling the interpass temperature effect on residual stress in low transformation temperature stainless steel welds. Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference PVP 2011, July 17-1, 2011, Baltimore, Maryland, USA, pp 1451-458
63. Francis JA, Kundu S, Bhadeshia HKDH, Stone HJ, Rogge RB, Withers PJ, Karlsson L (2009) The effects of filler metal transformation temperature on residual stresses in a high strength steel weld intervening transformations. J Press Vessel Technol 131:1-5 CrossRef
64. Bhadeshia HKDH, Francis JA, Stone HJ, Kundu S, Rogge RB, Withers PJ, Karlsson L (2007) Transformation plasticity in steel metals. Proceedings of the 10th International Aachen welding Conference Welding and Joining, Key Technologies for the Future, 24-5 October 2007, Eds. Uwe Reisgen, pp 171-79. ISBN: 978-3-8322-6644-8
65. Dai H, Francis JA, Stone HJ, Bhadeshia HKDH, Withers PJ (2008) Characterizing phase transformations and their effect on ferritic weld residual stresses with X-rays and neutrons. Metall Mater Trans A 39:3070-078 CrossRef
66. Stone HJ, Bhadeshia HKDH, Withers PJ (2008) In-situ monitoring of weld transformations to control weld residual stresses. Mater Sci Forum 571-72:393-98 CrossRef
67. Moat RJ, Stone HJ, Shirzadi AA, Francis JA, Kundu S, Mark AF, Bhadeshia HKDH, Karlsson L, Withers PJ (2011) Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds. Sci Technol Weld Join 16:279-84 CrossRef
68. Shiga C, Yasuda HY, Hiraoka K, Suzuki H (2010) Effect of Ms temperature on residual stress in welded joints of high-strength steels. Weld World 54:71-9 CrossRef
69. Heinze C, Kromm A, Schwenk C, Kannengiesser T, Rethmeier M (2011) Welding residual stresses depending on solid-state transformation behaviour studied by numerical and experimental methods. Mater Sci Forum 681:85-0 CrossRef
70. Altenkirch J, Gibmeier J, Kromm A, Kannengiesser T, Nitschke-Pagel T, Hofmann M (2011) In situ study of structural integrity of low transformation temperature (LTT)-welds. Mater Sci Eng A 528:5566-575 CrossRef
71. Gibmeier J, Obelode E, Altenkirch J, Kromm A, Kannengie?er T (2014) Residual stress in steel fusion welds joined using low transformation temperature (LTT) filler material. Mater Sci Forum 768-69:620-27
72. Akselsen OM, Aune R, Olden V (2007) Effects of phase transformation on residual stresses in welding of stainless steels. Int J Offshore Polar Eng 17:145-51
73. Shiga C, Mraz L, Bernasovsky P, Hiraoka K, Mikula P, Vrana M (2007) Residual stress distribution of steel welded joints with weld metal of low martensite transformation temperature. Weld World 51:11-9 CrossRef
74. Altenkirch J, Gibmeier J, Kostov V, Kromm A, Kannengiesser T, Doyle S, Wanner A (2011) Time- and temperature-resolved synchrotron X-ray diffraction: observation of phase transformation and strain evolution in novel low temperature transformation weld filler materials. J Strain Anal Eng Des 46:563-79 CrossRef
75. Kromm A, Kannengiesser T, Gibmeier J (2010) In-situ observation of phase transformations during welding of low transformation temperature filler material. Mater Sci Forum 638-42:3769-774 CrossRef
76. Thibault D, Bocher P, Thomas M, Gharghouric M, C?té M (2010) Residual stress characterization in low transformation temperature 13%Cr-%Ni stainless steel weld by neutron diffraction and the contour method. Mater Sci Eng A 527:6205-210 CrossRef
77. Thibault D, Bocher P, Thomas M (2009) Residual stress and microstructure in welds of 13%Cr-%Ni martensitic stainless steel. J Mater Process Technol 209:2195-202 CrossRef - 作者单位：Arne Kromm (1)
Jonny Dixneit (1)
Thomas Kannengiesser (1)
1. BAM Federal Institute for Materials Research and Testing, Unter den Eichen 87, 12205, Berlin, Germany - ISSN：1878-6669
文摘
Residual stress engineering in welding becomes more and more prominent as the use of tailored materials, e.g., high-strength steels, calls for maximum utilization of the material properties. As a consequence, residual stresses have to be considered as design criterion. Moreover, it may be utilized to improve the material’s performance. Low transformation temperature alloys are a smart approach to control the residual stresses already during the welding process avoiding time-consuming postweld treatments. This paper gives an overview about the progress made in research in this topic with special focus on residual stresses. Basics as well as important developments will be addressed.