Induced Magnetic Field Used to Detect the Sigma Phase of a 2205 Duplex Stainless Steel

详细信息    查看全文

• 作者：Edgard de Macedo Silva ; Josinaldo Pereira Leite…
• 关键词：Non ; destructive testing ; Optical microscopy ; Charpy test ; Scanning electron microscopy ; Sigma phase ; X ; ray diffraction
• 刊名：Journal of Nondestructive Evaluation
• 出版年：2016
• 出版时间：June 2016
• 年：2016
• 卷：35
• 期：2
• 全文大小：1,406 KB
• 参考文献：1.Martins, M., Casteletti, L.C.: Microstructural characterization and corrosion behavior of a super duplex stainless steel casting. Mater. Charact. 60, 150–155 (2009)CrossRef
  2.Badjia, R., Bouabdallah, M., Bacroix, B., Kahloun, C., Bettahar, K., Kherrouba, N.: Effect of solution treatment temperature on the precipitation kinetic of r-phase in 2205 duplex stainless steel welds. Mater. Sci. Eng. A 496(1–2), 447–454 (2008)CrossRef
  3.Deng, B., Jiang, Y., Gong, J., Zhong, C., Gao, J., Li, J.: Critical pitting and repassivation temperatures for duplex stainless steel in chloride solutions. Electrochim Acta 53(16), 5220–5225 (2008)CrossRef
  4.Tavares, S.S.M., Terra, V.F., Neto, P.L., Matos, D.E.: Corrosion resistance evaluation of the UNS S31803 duplex stainless steels aged at low temperatures (350–550 \(^\circ \) C) using DLEPR tests. J. Mater. Sci. 40(15), 4025–4028 (2005)CrossRef
  5.Jiang, Z.H.L., Chen, X.Y., Huang, H., Liu, X.Y.: Grain refinement of Cr25Ni5Mo1.5 duplex stainless steel by heat treatment. Mater. Sci. Eng. A 363(1–2), 263–267 (2003)CrossRef
  6.Chen, T.H., Weng, K.L., Yang, J.R.: The effect of high temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel. Mater. Sci. Eng. A 338(1–2), 259–270 (2002)CrossRef
  7.Pohl, M., et al.: Effect of intermetallic precipitation on the properties of duplex stainless steel. Mater. Charact. 58, 65–71 (2007)CrossRef
  8.Normando, P.G., Moura, E.P., Souza, J.A., Tavares, S.S.M., Padovese, L.R.: Ultrasound, Eddy current and magnetic Barkhausen noise as tools for sigma phase detection on a UNS S31803 duplex stainless steel. Mater. Sci. Eng. A 527, 2886–2891 (2010)CrossRef
  9.Tavares, S.S.M., Pardal, J.M., Guerreiro, J.L., Gomes, A.M., Da Silva, M.R.: Magnetic detection of sigma phase in duplex stainless steel UNS S31803. J. Magn. Magn. Mater. 322(17), L29–L33 (2010)CrossRef
  10.Sieurin, H., Sandström, R.: Sigma phase precipitation in duplex stainless steel 2205. Mater. Sci. Eng. A 444(1–2), 271–276 (2007)CrossRef
  11.Souza, C.M., Abreu, H.F.G., Tavares, S.S.M., Rebello, J.M.A.: The \(\sigma \) phase formation in annealed UNS S31803 duplex stainless steel: texture aspects. Mater. Charact. 59(9), 1301–1306 (2008)CrossRef
  12.Sathirachinda, N., et al.: Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS. Corros. Sci. 51, 1259–1266 (2009)CrossRef
  13.Moura, V.S., Lima, L.D., Pardal, J.M., Kina, A.Y., Corte, R.R.A., Tavares, S.S.M.: Influence of the microstructure on the corrosion resistance of the duplex stainless steel UNS S31803. Mater. Charact. 59(8), 1127–1132 (2008)CrossRef
  14.Zou, D., Han, Y., Zhang, W., Fan, G.: Phase transformation and its effects on mechanical properties and pitting corrosion resistance of 2205 duplex stainless steel. J. Iron Steel Res. Int. 17(11), 67s–72s (2010)CrossRef
  15.Wei, Z., Laizhu, J., Jincheng, H., Hongmei, S.: Effect of ageing on precipitation and impact energy of 2101 economical duplex stainless steel. Mater. Charact. 6(1), 50–55 (2009)
  16.Nilssom, J.O., Kangas, P., Karlsson, T., Wilson, A.: Mechanical properties, microstructural stability and kinetics of sigma phase formation in a 29Cr–6Ni–2Mo–0.38N super duplex stainless steel. Metall. Mater. Trans. A 31(1), 35–45 (2000)CrossRef
  17.Muthupandi, V., Srinivasan, B.P., Seshadri, S.K., Sundaresan, S.: Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds. Mater. Sci. Eng. A 58, 9–16 (2003)CrossRef
  18.Pardal, J.M., Tavares, S.S.M., Fonseca, M.P.C., da Silva, M.R., Ferreira, L.R.: Study of deleterious phase precipitation under continuous cooling of superduplex stainless steel UNS S32750. Mater. Sci. Technol. 28(3), 295–302 (2012)CrossRef
  19.Mohapatra, J.N., Kamada, Y., Kikuchi, H., Kobayashi, S., Echigoya, J., Park, D.G., Cheong, Y.M.: Evaluation of embrittlement in isochronal aged Fe–Cr alloys by magnetic hysteresis loop technique. J. Magn. 16(2), 173–176 (2011)CrossRef
  20.Mohapatra, J.N., Kamada, Y., Murakami, T., Echigoya, J., Kikuchi, H., Kobayashi, S.: Magnetic hysteresis loop technique as a tool for the evaluation of \(\sigma \) phase embrittlement in Fe-Cr alloys. J. Magn. Magn. Mater. 327, 71–75 (2013)CrossRef
  21.Lo, K.H., Lai, J.K.L., Shek, C.H., Li, D.J.: Magnetic and transformation behaviour of duplex stainless steels under non-isothermal conditions and temperature-fluctuation monitoring. Mater. Sci. Eng. A 452–453, 149–160 (2007)CrossRef
  22.Lo, K.H., Lai, J.K.L.: Microstructural characterisation and change in a.c. magnetic susceptibility of duplex stainless steel during spinodal decomposition. J. Nucl. Mater. 401(1–3), 143–148 (2011)
  23.Ghanei, S., Kashefi, M., Mazinani, M.: Eddy current nondestructive evaluation of dual phase steel. Mater. Des. 50, 491–496 (2013)CrossRef
  24.Camerini, C., Sacramento, R., Areiza, M.C., Rocha, A., Santos, R., Rebello, J.M., Pereira, G.: Eddy current techniques for super duplex stainless steel characterization. J. Magn. Magn. Mater. 388, 96–100 (2015)CrossRef
  25.Ghanei, S., Kashefi, M., Mazinani, M.: Comparative study of eddy current and Barkhousen noise nondestructive testing methods in microstructural examination of ferrita–martensite dual-phase steel. J. Magn. Magn. Mater. 356, 103–110 (2014)CrossRef
  26.Nunes, T.M., de Albuquerque, V.H.C., Papa, J.P., Silva, C.C., Normando, P.G., Moura, E.P., Tavares, J.M.R.S.: Automatic microstructural characterization and classification using artificial intelligence techniques on ultrasound signals. Expert Syst. Appl. 40(8), 3096–3105 (2013)CrossRef
  27.Albuquerque, V.H.C., Silva, E.M., Leite, J.P., Moura, E.P., de Araújo Freitas, V.L., Tavares, J.M.R.S.: Spinodal decomposition mechanism study on the duplex stainless steel UNS S31803 using ultrasonic speed measurements. Mater. Des. 31(4), 2147–2150 (2010)CrossRef
  28.Albuquerque, V.H.C., Silva, C.C., Normando, P.G., Moura, E.P., Tavares, J.M.R.S.: Thermal aging effects on the microstructure of Nb-bearing nickel based superalloy weld overlays using ultrasound techniques. Mater. Des. 36, 337–347 (2012)CrossRef
  29.Silva, E.M., Albuquerque, V.H.C., Leite, J.P., Varela, A.C.G., Moura, E.P., Tavares, J.M.R.S.: Phase transformations evaluation on a UNS S31803 duplex stainless steel based on nondestructive testing. Mater. Sci. Eng. A 516, 126–130 (2009)CrossRef
  30.Albuquerque, V.H.C., Melo, T.A.A., Gomes, F.O.R.M., Tavares, J.M.R.S.: Evaluation of grain refiners influence on the mechanical properties in a CuAlB shape memory alloy by ultrasonic and mechanical tensile testing. Mater. Des. 31(7), 3275–3281 (2010)CrossRef
  31.Lindgren, M., Lepistö, T.: On the stress vs Barkhausen noise relation in duplex stainless steel. NDT Int. 37, 403–410 (2004)CrossRef
  32.Piotrowski, L., Augustyniak, B., Chmielewski, M., Hristoforou, E.V., Kosmas, K.: Evaluation of Barkhausen noise and magneto acoustic emission signals properties for plastically deformed Armco iron. IEEE Trans. Magn. 46, 239–242 (2010)CrossRef
  33.Rebello, J.M.A., Camerini, C.G., Areiza, M.C.L., Santos, R.W., Carneval, R.O.: (2012) Saturated low frequency eddy current technique applied to phases characterization in duplex stainless steel. In: Quantitative Non-Destructive Evaluation pp. 311–321
  34.Uchimoto, T., et al.: Eddy current evaluation of cast irons for material characterization. J. Magn. Magn. Mater. 258, 493–496 (2003)CrossRef
  35.Rebello, J.M.A., Sacramento, R., Areiza, M.C.L., Assis, K.S.: Quantification of sigma phase precipitation by magnetic nondestructive testing. Proc. XV Int. Workshop Electromagn. Nondestruct. Eval. 35, 311–321 (2010)
  36.Silva, E.M., Leite, J.P., França Neto, F.A., Leite, J.P., Fialho, W.M.L., Albuquerque, V.H.C., Tavares, J.M.R.S.: Evaluation of the magnetic permeability for the microstructural characterization of a duplex stainless steel. J. Test Eval. 44(3), 20130313 (2016)CrossRef
  37.Freitas, V.L.A., Albuquerque, V.H.C., Silva, E.M., Silva, A.A., Tavares, J.M.R.S.: Nondestructive characterization of microstructures and determination of elastic properties in plain carbon steel using ultrasonic measurements. Mater. Sci. Eng. A Struct. Mater. 527, 4431–4437 (2010)CrossRef
  38.Albuquerque, V.H.C., Alexandria, A.R., Cortez, P.C., Tavares, J.M.R.S.: Evaluation of multilayer perceptron and self-organizing map neural network topologies applied on microstructure segmentation from metallographic images. NDT Int. 42, 644–651 (2009)CrossRef
  39.Albuquerque, V.H.C., Rebouças Filho, P.P., Cavalcante, T.S., Tavares, J.M.R.S.: New computational solution to quantify synthetic material porosity from optical microscopic images. J. Microsc. 240, 50–59 (2010)MathSciNet CrossRef
  40.Albuquerque, V.H.C., Tavares, J.M.R.S., Cortez, P.C.: Quantification of the microstructures of hypoeutectic white cast iron using mathematical morphology and an artificial neural network. Int. J. Microsc. Mater. Prop. 5, 52–64 (2010)
  41.Albuquerque, V.H.C., Tavares, J.M.R.S., Durão, L.M.P.: Evaluation of delamination damage on composite plates using an artificial neural network for the radiographic image analysis. J. Compos. Mater. 44, 1139–1159 (2010)CrossRef
  42.Albuquerque, V.H.C., Silva, C.C., Menezes, T.I.S., Farias, J.P., Tavares, J.M.R.S.: Automatic evaluation of nickel alloy secondary phases from SEM images. Microsc. Res. Tech. 74, 36–46 (2011)CrossRef
  43.Albuquerque, V.H.C., Cortez, P.C., Alexandria, A.R., Tavares, J.M.R.S.: A new solution for automatic microstructures analysis from images based on a backpropagation artificial neural network. Nondestr. Test Eval. 23, 273–283 (2008)CrossRef
  44.Cullity, B.D., Graham, C.D.: Introduction to Magnetic Materials, 2nd edn. Wiley, New Jersey (2009)
  45.Coey, J.M.D.: Magnetism and Magnetic Materials. Cambridge University Press, New York (2009)
  46.Yang, M., Chen, Y.C., Chen, C.H., Huang, W.P., Lin, D.-Y.: Microstructural characterization of \(\delta \) /\(\gamma \) /\(\sigma \) /\(\gamma \) 2/\(\chi \) phases in silver-doped 2205 duplex stainless steel under 800 \(^\circ \) C aging. J. Alloys Compd. 633, 48–53 (2015)CrossRef
  47.Fargas, G., Anglada, M., Mateo, A.: Effect of the annealing temperature on the mechanical properties, formability and corrosion resistance of hot-rolled duplex stainless steel. J. Mater. Process. Technol. 209(4), 1770–1782 (2009)CrossRef
  48.Martins, M., Forti, L.R.N.: Effect of aging on impact properties of ASTM A890 Grade 1C super duplex stainless steel. Mater. Charact. 59(2), 162–166 (2008)CrossRef
  
• 作者单位：Edgard de Macedo Silva (1)
  Josinaldo Pereira Leite (2)
  João Pereira Leite (3)
  Walter Macedo Lins Fialho (1)
  Victor Hugo C. de Albuquerque (4)
  João Manuel R. S. Tavares (5)
  
  1. Instituto Federal de Educação Ciência e Tecnologia da Paraíba, Av. Primeiro de Maio, 720 - Jaguaribe, João Pessoa, PB, 58015-435, Brazil
  2. Universidade Federal da Paraíba, Jardim Universitário, s/n - Castelo Branco, João Pessoa, PB, 58051-900, Brazil
  3. Universidade Federal de Campina Grande, R. Aprígio Veloso, 882 -Universitário, Campina Grande, PB, 58429-900, Brazil
  4. Programa de Pós-Graduação em Informática Aplicada, Universidade de Fortaleza, Fortaleza, Ceará, Brazil
  5. Departamento de Engenharia Mecânica, Faculdade de Engenharia, Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Universidade do Porto, Rua Dr. Roberto Frias, S/N, 4200-465, Porto, Portugal
  
• 刊物类别：Engineering
• 刊物主题：Structural Mechanics
  Characterization and Evaluation Materials
  Vibration, Dynamical Systems and Control
  Mechanics
  
• 出版者：Springer Netherlands
• ISSN：1573-4862

文摘

Sigma phases are formed due to heat treatments and/or welding processes during the solidification stage, and they are responsible for embrittlement of duplex stainless steels. Only a small amount of this phase promotes unfavorable mechanical properties and liability to corrosion. In this work, a new affordable approach to detect and follow-up the kinetics of the sigma phase transformation is evaluated. The measurements are based on an induced magnetic field generated through the interaction between an external magnetic field and the microstructure under study. To validate this approach, the induced magnetic field values are compared with the values of the Charpy impact energy, and the sigma phase is assessed by optical microscopy. Moreover, surface fractures are analyzed by scanning electron microscopy and X-ray diffraction. The results from the 2205 duplex stainless steel used show that there is a direct relation among the impact energy, fracture mechanism and induced magnetic field. The method proved to be able to follow up the embrittlement of the DSS successfully. Moreover, the results confirm that the presence of a sigma phase can be studied based on an induced magnetic field, even when in low amounts, and that a critical threshold value can be defined to monitor structures in service.