Optimization of PMEDM process parameter for maximizing material removal rate by Taguchi’s method

详细信息    查看全文

• 作者：Banh Tien Long ; Nguyen Huu Phan ; Ngo Cuong…
• 关键词：EDM ; PMEDM ; MRR ; Taguchi’s method ; Signal to noise ratio ; Titanium powder
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：87
• 期：5-8
• 页码：1929-1939
• 全文大小：611 KB
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering
  Production and Logistics
  Mechanical Engineering
  Computer-Aided Engineering and Design
  
• 出版者：Springer London
• ISSN：1433-3015
• 卷排序：87

文摘

The electrical discharge machining process is hampered by a low material removal rate (MRR), high tool wear, and low quality of machined surface, which limit its applicability. The use of powder mixed electrical discharge machining helps overcome this drawback and increases the efficiency of the machining process. This study focused on the machining of SKD61, SKD11, and SKT4 die steels using titanium powder. Taguchi methods and analysis of variance were employed to identify the main parameters that affect the MRR. The other process parameters considered were the electrode material, workpiece material, electrode polarity, pulse-on time, pulse-off time, electric current, and titanium powder concentration. The results indicated that electric current, electrode material, and powder concentration were the most significant parameters that influenced the MRR. A powder concentration of 20 g/l increased the MRR by 42.1 %, as compared with no-powder machining. Further, the optimal value of the MRR was determined to be 45.734 mm3/min.