Dissolution rate of solid iron into liquid Fe-C alloy

详细信息    查看全文

• 作者：Minsoo Shin (1)
  Joon Seok Oh (1)
  Jeoungho Lee (2)
  Sukkwang Jung (2)
  Joonho Lee (1)
  
• 关键词：metals ; liquids ; diffusion ; melting ; chemical analysis
• 刊名：Metals and Materials International
• 出版年：2014
• 出版时间：November 2014
• 年：2014
• 卷：20
• 期：6
• 页码：1139-1143
• 全文大小：408 KB
• 参考文献：1. K. Ohno, T. Miki, and M. Hino, / ISIJ Int. 44, 2033, (2004). CrossRef
  2. K. Mori and H. Nomura, / Tetsu-to-Hagane. 55, 347 (1969).
  3. M. Shin, S. Min, J. Lee, J. Park, and D. Min, / Met. Mater. Int. 18, 1041 (2012). CrossRef
  4. D. Jang, Y. Kim, M. Shin, and J. Lee, / Metall. Mater. Trans. B 43B, 1308 (2012). CrossRef
  5. R. D. Pehlke, P. D. Goodwell, and R. W. Dunlap, / Trans. Metall. Soc. AIME 233, 1420 (1965).
  6. J. M. Lommel and B. Chalmers, / Trans. Metall. Soc. AIME 215, 499 (1959).
  7. K. Mori and T. Sakuraya, / Trans. ISIJ 22, 984 (1982). CrossRef
  8. Y. Kim and R. D. Pehlke, / Metall. Trans. 5, 2527 (1974). CrossRef
  9. M. Kosaka and S. Minowa, / Tetsu-to-Hagane. 53, 983 (1967).
  10. H. Nomura and K. Mori, / Tetsu-to-Hagane. 55, 1134 (1969).
  11. B. Deo and R. Boom, / Fundamentals of Steelmaking Metallurgy, Prentice Hall International, New York (1993).
  12. R. N. Barfield and J. A. Kitchener, / J. Iron Steel Inst. 180, 324 (1955).
  13. Y. Wanibe, S. Takai, T. Fujisawa, and H. Sakao, / Trans. ISIJ. 31B, 1517 (1982).
  14. J. Y. Jung, J. Lee, H. Lee, J. S. Ki, and J. I. Hwang, / Korean J. Met. Mater. 50, 122 (2012).
  15. S. B. An, M. Shin, K. J. Sim, and J. Lee, / Met. Mater. Int. 20, 351 (2014). CrossRef
  
• 作者单位：Minsoo Shin (1)
  Joon Seok Oh (1)
  Jeoungho Lee (2)
  Sukkwang Jung (2)
  Joonho Lee (1)
  
  1. Department of Materials Science and Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 136-713, Korea
  2. Technical Research Laboratories, POSCO, 1 Goedong-dong, Nam-gu, Pohang, Gyeongbuk, 790-300, Korea
  
• ISSN：2005-4149

文摘

Dissolution rate of solid iron into liquid Fe-C alloy was investigated using a sampling method at a fixed reaction area. The initial carbon concentration of the bulk liquid Fe-C alloy was set as 4.23, 3.29 and 2.17 wt% for the experiments at 1503, 1597, and 1688 K, respectively. The temperature dependence of the rate constant was obtained as follows: \(\ln k(m/s) = - 3.47 - \tfrac{{8905}} {T}\) . The activation energy was estimated to be 74 kJ/mol. A dimensionless analysis was carried out separately to confirm the rate-determining step. The measured values showed reasonable agreement with the calculated values from the dimensionless analysis. Therefore, it is concluded that the mass transfer in the liquid boundary layer is the rate-determining step for the dissolution of solid iron in the liquid Fe-C alloy. The liquid boundary layer was estimated approximately 100 μm, which slightly decreased with increasing temperature. Present experimental results would be helpful to understand the mechanism of liquid iron formation in the ironmaking and steelmaking processes as well as in the reduction of iron-containing slags.