Introducing Areca catechu as a raw material of cement-bonded board through determining the properties of Areca catechu cement-bonded board

详细信息    查看全文

• 作者：Rupak Kumar Ghosh ; Md. Mizanur Rahman…
• 关键词：Areca catechu ; Cement ; bonded board ; Physical properties ; Mechanical properties
• 刊名：Journal of the Indian Academy of Wood Science
• 出版年：2015
• 出版时间：December 2015
• 年：2015
• 卷：12
• 期：2
• 页码：99-103
• 全文大小：357 KB
• 参考文献：Aggarwal LK (1992) Studies on cement bonded coir fiber boards. Cem Concr Compos 14:63鈥?9CrossRef
  Ajayi B (2002) Preliminary investigation of cement-bonded particle board from maize stalk residues. Niger J For 32:33鈥?7
  Ajayi B (2003) Evaluation of additive concentration on modulus of rupture and internal bond of cement-bonded flakeboard. Appl Trop Agric 8:87鈥?3
  Ajayi B (2004) Reaction of cement-bonded composites from Gmelina arborea and Leucaena leucocephala to water treatment. Niger J For 34:125鈥?31
  Anon (1975) Cement-bonded particleboard plant: integrated with low-cost housing production unit: a case study. FAO portfolio of small-scale forest industries for developing countries. FAO, Rome
  Anon (1985) Specification for wood particleboards (medium density) for general purposes (first revision). IS: 3087-1985. Indian Standard Institution, New Delhi
  Anon (2001) The application of carbon dioxide- curing technology on the manufacture of the oil palm fronds cement-bonded board. Department of Forest and Biomass Science, Graduate School of the Faculty of Agriculture, Kyoto University, Kyoto, pp 47鈥?0
  Anon (2013) Preserving ancient sacred knowledge. www.鈥媏ntheology.鈥媜rg . Accessed 7 Feb 2014
  Badejo SOO (1987) A preliminary investigation of the bonding potential of elephant grass and chromolaena for cement-bonded particle board production. J Trop For Res 3:42鈥?3
  Biswas D, Sheikh MW, Hasnin SM, Ali M (1997) Suitability of Albizia falcataria wood for cement bonded particleboard. Bangladesh J. For. Sci, Bangladesh For Res Inst, Chittagong 26:62鈥?7
  Das AK, Billha M, Shams MI, Hannan MO (2012) Physical and mechanical properties of bamboo wastage cement bonded board. J Indian Acad Wood Sci 9:170鈥?75CrossRef
  Del Mene茅is CHS, de Castro VG, de Souza MR (2007) Production and properties of a medium density wood-cement boards produced with oriented strands and silica fume. Maderas Cienciay Tecnol 9:105鈥?15
  English B (1994) Wastes into wood: composites are a promising. Environ Health Perspect 102:1鈥?CrossRef
  Erakhrumen AA, Areghan SE, Ogunleye MB, Larinde SL, Odeyale OO (2008) Selected physico-mechanical properties of cement bonded particleboard made from pine (Pinus caribaea M.) sawdust-coir (Cocos nucifera L.) mixture. Sci Res Essay 3:197鈥?03
  Eusebio DA, Kawai S, Imamura Y, Sasaki H (1994) Isocyanate-inorganic bonded composites II. Shortening the pressing time of cement-bonded particleboard particleboard. J Jpn Wood Res Soc (JWRS) 39:1267鈥?275
  Eusebio DA, Novicio LA, Dionglay CV (1998) Influence of rice hull ash (RHA) on the properties of wood wool cement Boards. FPRDI J 24:67鈥?0
  Eusibeo DA (2003) Cement bonded board: today鈥檚 alternative. Paper presented at a technical forum in celebration of the 21st PCIERD Anniversary, DOST held at EDSA Shangri-La, EDSA, Pasig City, 17 Mar 2003
  Staples GW, Bevacqua RF (2006) Areca catechu (betel nut palm). In: Elevitch CR (ed) Species profiles for Pacific Island agroforestry. Permanent Agriculture Resources (PAR), Holualoa, HI, USA, pp 1鈥?7
  Kollmann FFP, Kuenzi EW, Stamm AJ (1975) Principles of wood science and technology, vol. II. Wood-based materials. Springer, New YorkCrossRef
  Kwon HE, Geimer RL (1998) Impact of steam pressing variables on the dimensional stabilisation of flakeboards. For Prod J 48:55鈥?1
  Latorraca JVF, Iwakiri S (2000) Efeitos do tratamento das part铆culas de Eucalyptus dunnii (Maid), da varai莽茫o da rela莽茫o madeira-cimento e do uso de aditivos sobre as propriedades f铆sicas e mec芒nicas de chapas de madeira-cimento. Cerne 6:68鈥?6
  Nagadomi W, Kuroki Y, Eusebio DA, Ma L, Kawai S, Sasaki H (1996) Rapid curing of cement-bonded particleboard III. Effect of sodium bicarbonate and some cement hardening accelarators. J Jpn Wood Res Soc (JWRS) 42:762鈥?68
  Oyagade AO (1995) Influence of portland cement alkalinity on the dimensional stability of cement-wood particleboard. Niger J For 24:21鈥?5
  Papadopoulos AN, Traboulay EA, Hill CAS (2002) One layer experimental particleboard from coconut chips鈥?Cocos nucifera L.). Holz als Roh- und Werkstoff 60:394鈥?96CrossRef
  Papadopoulos AN, Hill CAS, Gkaraveli A, Ntalos GA, Karastergiou SP (2004) Bamboo chips (Bambusa vulgaris) as an alternative lignocellulosic raw material for particleboard manufacture. Holz Roh Werkst 62:36鈥?9
  Ramirez-Coretti A, Eckelman CA, Wolfe RW (1998) Inorganic-bonded composite wood panel systems for low-cost housing; a central American preservatives. For Prod J 48:62鈥?8
  Sandermann W (1970) Technical processes for the production of wood-wool cernent borards and their adaptation to the utilization of agricultural residues. UNIDO ID/WG. 83/4, 1 970. In: Badejo (1988) Effect of flake geometry on properties of cement-bonded particleboard from mixed tropical hardwoods. Wood Sci Technol 22: 357鈥?70
  S茂matupang MH, Schwarz HG, Broker FW (1978) Small scale plants for the manufacture of mineral-bonded wood composites. Special paper 8th World Forestry Congress, FID-W2 1鈥?, Jarkata
  Simatupang MH, Sedding N, Habighorst C, Geimer RL (1991) Technologies for rapid production of mineral-bonded wood composite boards. In: Al Moslemi (ed) Proceedings of the second international inorganic bonded wood and fiber composite materials, 6鈥? May 1991. University of Idaho, Forest Products Resources Society, Madison, pp 18鈥?7
  Wang D, Sun X (2002) Low density particleboard from wheat straw and corn pith. Ind Crops Prod 15:43鈥?0CrossRef
  Wolfe R, Gjinolli AE (1996) Assessment of cement-bonded wood composites as a means of using low-valued wood for engineered applications. In: International wood engineering conference 1996, USDA Forest Service, Forest Products Laboratory, Madison
  Zheng Y, Zhongli LP, Zhang RH, Jenkins BM, Blunk S (2007) Particleboard quality characteristics of saline jose tall wheatgrass and chemical treatment effect. Bioresour Technol 98:1304鈥?310CrossRef PubMed
  Zhou Y, Kamdem DP (2002) Effect of cement/wood ratio on the properties of cement-bonded particleboard using CCA-treated wood removed from service. For Prod J 52:73鈥?1
  
• 作者单位：Rupak Kumar Ghosh (1)
  Md. Mizanur Rahman (1)
  Atanu Kumar Das (1) (2)
  Rumana Rana (1)
  Md. Iftekhar Shams (1) (3)
  
  1. Forestry and Wood Technology Discipline, Khulna University, Khulna, 9208, Bangladesh
  2. Pulp and Paper Technology, Asian Institute of Technology, 58 Moo 9, Km. 42, Paholyothin Highway Klong Luang, Pathumthani, 12120, Thailand
  3. Research Institute for Sustainable Humanosphere (RISH), Kyoto University, Kyoto, Japan
  
• 刊物主题：Wood Science & Technology; Forestry; Forestry Management;
• 出版者：Springer India
• ISSN：0976-8432

文摘

The study was conducted to assess the properties of cement bonded board made from Areca catechu (betel nut) stem. Fine, coarse and fine-coarse boards were prepared. The ratios of particles weight and cement were 1:2 and 1:3 for each type of board. The laboratory tests for characterization of physical and mechanical properties were carried out for each type of board. In case of physical properties, moisture content, density, water absorption, thickness swelling and linear expansion were evaluated. Modulus of elasticity (MOE) and Modulus of rapture (MOR) were evaluated for mechanical properties. From all the cement bonded boards, the board made with the ratio of 1:3 showed the best performance. Cement bonded particle board made from betel nut may be an alternative raw material for manufacturing cement bonded board. Keywords Areca catechu Cement-bonded board Physical properties Mechanical properties