Pants lining manufacturing survey of menswear brands in South Korea

详细信息    查看全文

• 作者：Myoung-Ok Kim ; Injoo Kim
• 关键词：Menswear ; Suit pants ; Casual pants ; Lining pattern
• 刊名：Fashion and Textiles
• 出版年：2015
• 出版时间：December 2015
• 年：2015
• 卷：2
• 期：1
• 全文大小：936KB
• 参考文献：Cabrera, R. (1996). Classic tailoring techniques: a construction guide for men’s wear. New York: Fairchild Publications.
  Cho, R. H. (2008). Establishments of the suitable basic slim fit jacket pattern for man age of 18-4. Unpublished master’s thesis, Sungkyunkwan University, Seoul.
  Hong, E. H., & Suh, M. A. (2012). A comparative study on men’s bodice slopers-Using a 3D virtual garment system. The Research Journal of the Costume Culture, 20(3), 403-15.CrossRef
  Kang, S. H., & Suh, M. A. (2007). [Clothing three-dimensional construction]. Paju: Kyomunsa.
  Kim, Y. (2008). An establishments of crotch ease of men’s slacks for lower body mobility. The Journal of the Korean Society of Clothing and Textiles, 32(4), 553-61.CrossRef
  Kim, M. O. (2014). A survey on jacket lining manufacture of menswear brands. The Research Journal of the Costume Culture, 22(2), 300-12.CrossRef
  Kim, M. O., & Kim, I. (2014). Patternmaking for menswear: classic to contemporary. New York: Fairchild Publications.
  Kim, M. O., & Suh, M. A. (2007). A study in the pattern making of the lining fabrics for jackets made of stretchable fabric. The Research Journal of the Costume Culture, 15(6), 1038-052.
  Kim, M. O., Uh, M. K., & Park, M. J. (2006). A study on the mechanical and hand properties of the lining fabrics. The Journal of The Society of Fashion and Textile Industry, 8(3), 357-62.
  Knowles, L. A. (2006). The practical guide to patternmaking for fashion designers. New Yoke: Fairchild Publications.
  Kwak, Y. S., Kim, J. Y., & Baek, Y. H. (2008). [Men’s wear tailoring]. Seoul: Kyoungchunsa.
  Lee, M. S., & Suh, M. A. (2008). A study on the lining pattern making method of pants made of stretchable fabrics. The Research Journal of the Costume Culture, 16(1), 48-7.
  Nam, Y. J., & Lee, H. S. (2005). [Men’s wear research]. Seoul: Kyoungchunsa.
  Suh, D. A., & Chun, J. S. (2004). Men’s bodice pattern making method using 3-D body scan data. The Research Journal of Costume Culture, 12(2), 290-99.
  Yang, C. E., & Seong, O. J. (2011). Development of pattern in casual slim-fit jacket for middle-aged men. Journal of Design forum, 32, 382-91.
  
• 作者单位：Myoung-Ok Kim (1)
  Injoo Kim (2)
  
  1. Department of Fashion Design, Howon University, Gunsan-si, Jeollabuk-do, 54058, Republic of Korea
  2. Fashion Design Program, University of Cincinnati, Cincinnati, USA
  
• 刊物类别：Textile Engineering; Characterization and Evaluation of Materials; Business/Management Science, gene
• 刊物主题：Textile Engineering; Characterization and Evaluation of Materials; Business/Management Science, general; Humanities, general; Life Sciences, general; Environment, general;
• 出版者：Springer Berlin Heidelberg
• ISSN：2198-0802

文摘

This study aims to survey the pants lining manufacturing of menswear brands and to provide practical data for developing the pants lining pattern. The researchers collected data by interviewing patternmakers of thirteen menswear brands in Korea. The results of this study are as follows: first, 69.2% of menswear brands provide the pants lining pattern to the garment factory. Important factors in the patternmaking methods for the lining were the pant styles and the outer shell fabric’s degree of stretch. Second, for manufacturing comparisons according to the pant style, the seam allowance from the back crotch line to the waistline showed that suit pants had varied seam allowance throughout the pant, while casual pants had the same seam allowance throughout the pant. Also, results showed that menswear pants lining were manufactured only in the front for the suit pants lining. Third, ease in the pants lining pattern the waist, hip, and thigh were the same 0.75 cm. Due to the specific shifting amount in ease, the lining pattern increases in size. The length of the back could be adjusted whether the length is below the crotch level or below the knee level. Therefore, this study suggests that when the pants lining is manufactured, the manufacturer should consider these results to develop the proper pants lining pattern, a task equally important as the outer shell pattern. Keywords Menswear Suit pants Casual pants Lining pattern