Yield Stress and Low-Temperature Start-Up Torque of Lubricating Greases

详细信息    查看全文

• 作者：F. Cyriac ; P. M. Lugt ; R. Bosman
• 刊名：Tribology Letters
• 出版年：2016
• 出版时间：July 2016
• 年：2016
• 卷：63
• 期：1
• 全文大小：1,422 KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Tribology, Corrosion and Coatings
  Surfaces and Interfaces and Thin Films
  Theoretical and Applied Mechanics
  Physical Chemistry
  Nanotechnology
  
• 出版者：Springer Netherlands
• ISSN：1573-2711
• 卷排序：63

文摘

A comprehensive study of the yield stress and start-up torque for six commonly used rolling bearing greases is presented. Both parameters were found to depend exponentially on temperature where the exponent changes below a low-temperature “break point.” This break point was found to be related to the pourpoint of the base oil, although the start-up torques of the greases were an order higher in magnitude than that of their corresponding bled oils. The start-up torque is mostly used to measure the low-temperature limit of a grease. It was found here that this temperature is much lower than the break point. The start-up torque criterion is measured using a particular bearing type and conditions. The low-temperature break point for the yield stress is a more universal grease parameter that gives useful information about the behavior of a grease at low temperatures and can be used as one of the guidelines for grease selection for low-temperature applications.KeywordsRolling bearingsLow-temperature limitArrhenius behavior