Isotactic polypropylene (PP) modified by ABS and CaCO3 nanoparticles: effect of composition and compatibilization on the phase morphology, mechanical properties and fracture behavior
详细信息 查看全文
- 作者：Omid Momen ; Majid Mehrabi-Mazidi ; Neda Jahangiri
- 关键词：Morphology ; Mechanical properties ; Compatibilization ; Impact toughness ; Fractography
- 刊名：Polymer Bulletin
- 出版年：2015
- 出版时间：November 2015
- 年：2015
- 卷：72
- 期：11
- 页码：2757-2782
- 全文大小：5,190 KB
- 参考文献：1.Rohlmann CO, Failla MD, Quinzani LM (2006) Linear viscoelasticity and structure of polypropylene鈥搈ontmorillonite nanocomposites. Polymer 47(22):7795鈥?804CrossRef
2.P茅rez E, Alvarez V, P茅rez CJ, Bernal C (2013) A comparative study of the effect of different rigid fillers on the fracture and failure behavior of polypropylene based composites. Compos Part-B 52:72鈥?3CrossRef
3.Hammani S, Moulai-Mostefa N, Benyahia L, Tassin JF (2012) Effects of composition and extrusion parameters on the morphological development and rheological properties of PP/PC blends. Co-continuity investigation. J Polym Res 19:9940CrossRef
4.Su F, Huang H, Zhao Y (2011) Microstructure and mechanical properties of polypropylene/poly(ethylene-co-octene copolymer)/clay ternary nanocomposites prepared by melt blending using supercritical carbon dioxide as a processing aid. Compos Part B-Eng 42(3):421鈥?28CrossRef
5.Kiss A, Fekete E, Puk谩nszky B (2007) Aggregation of CaCO3 particles in PP composites: effect of surface coating. Compos Sci Technol 67(7鈥?):1574鈥?583CrossRef
6.Yang H, Zhang Q, Guo M, Wang C, Du R, Fu Q (2006) Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites. Polymer 47(6):2106鈥?115CrossRef
7.Thio YS, Argon AS, Cohen RE, Weinberg M (2002) Toughening of isotactic polypropylene with CaCO3 particles. Polymer 43(13):3661鈥?674CrossRef
8.Ma Y, Wu D, Liu Y, Li X, Qiao H, Yu ZZ (2014) Electrically conductive and super-tough polypropylene/carbon nanotube nanocomposites prepared by melt compounding. Compos Part B 56:384鈥?91CrossRef
9.Tiwari R, Paul DR (2011) Polypropylene鈥揺lastomer (TPO) nanocomposites: 2. Room temperature Izod impact strength and tensile properties. Polymer 52(24):5595鈥?605CrossRef
10.Yang H, Zhang X, Qu C, Li B, Zhang L, Zhang Q, Fu Q (2007) Largely improved toughness of PP/EPDM blends by adding nano-SiO2 particles. Polymer 48(3):860鈥?69CrossRef
11.Hikasa S, Nagata K, Miyahara K, Izumi T, Suda T, Toyohara A, Kato A, Nakamura Y (2009) Influence of the incorporation of fine calcium carbonate particles on the impact strength of polypropylene/polystyrene-block-poly(ethylene butene)-block-polystyrene blends. J Appl Polym Sci 114(2):919鈥?27CrossRef
12.Wang X, Xu KJ, Xu XB, Park SJ, Kim S (2009) Selective particle distribution and mechanical properties of nano-CaCO3/ethylene鈥損ropylene鈥揹iene terpolymer/polypropylene composites with high content of nano-CaCO3. J Appl Polym Sci 113(4):2485鈥?491CrossRef
13.Gong L, Yin B, Li LP, Yang M-B (2011) The effects of different processing methods on the morphology and properties of PP/EPDM/Nano-CaCO3 ternary blend. J Macromol Sci B Phys 50(4):806鈥?20CrossRef
14.Gong L, Yin B, Li LP, Yang M-B (2012) Morphology and properties of PP/EPDM binary blends and PP/EPDM/nano-CaCO3 ternary blends. J Appl Polym Sci 123(1):510鈥?19CrossRef
15.Gong L, Yin B, Li LP, Yang M-B, Xie B-H, Feng J-M (2013) The morphology and mechanical properties of PP/EPDM/nano-CaCO3 composites: effect of initial mixing state. Polym Bull 70(11):2935鈥?952CrossRef
16.Guo HF, Packirisamy S, Gvozdic NV, Meier DJ (1997) Prediction and manipulation of the phase morphologies of multiphase polymer blends: 1. Ternary systems. Polymer 38(4):785鈥?94CrossRef
17.Dasari A, Yu ZZ, Mai YW (2005) Effect of blending sequence on microstructure of ternary nanocomposites. Polymer 46(16):5986鈥?991CrossRef
18.Long Y, Shanks RA (1996) PP鈥揺lastomer鈥揻iller hybrids. I. Processing, microstructure, and mechanical properties. J Appl Polym Sci 61(11):1877鈥?885CrossRef
19.Long Y, Shanks RA (1996) PP/elastomer/filler hybrids. II. Morphologies and fracture. J Appl Polym Sci 62(4):639鈥?46CrossRef
20.Li Z, Guo S, Song W, Hou B (2003) Effect of interfacial interaction on morphology and mechanical properties of PP/POE/BaSO4 ternary composites. J Mater Sci 38(8):1793鈥?802CrossRef
21.Ma C-G, Mai Y-L, Rong M-Z, Ruan W-H, Zhang M-Q (2007) Phase structure and mechanical properties of ternary polypropylene/elastomer/nano-CaCO3 composites. Compos Sci Technol 67(14):2997鈥?005CrossRef
22.Qian J, Cheng G, Zhang H, Xu Y (2011) Preparation and characterization of polypropylene/silica nanocomposites by gamma irradiation via ultrafine blend. J Polym Res 18(3):409鈥?17CrossRef
23.Zhang QX, Yu ZZ, Xie XL, Mai YW (2004) Crystallization and impact energy of polypropylene/CaCO 3 nanocomposites with nonionic modifier. Polymer 45(17):5985鈥?994CrossRef
24.Zuiderduin WCJ, Westzaan C, Huetink J, Gaymans RJ (2003) Toughening of polypropylene with calcium carbonate particles. Polymer 44(1):261鈥?75CrossRef
25.Fu YSY, Feng XQ, Lauke B, Mai YW (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate鈥損olymer composites. Compos Part B-Eng 39(6):933鈥?61CrossRef
26.Chan CM, Wu J, Li JX, Cheung YK (2002) Polypropylene/calcium carbonate nanocomposites. Polymer 43(10):2981鈥?992CrossRef
27.Lin Y, Chen H, Chan CM, Wu J (2010) The toughening mechanism of polypropylene/calcium carbonate nanocomposites. Polymer 51(14):3277鈥?284CrossRef
28.Dasari A, Zhang QX, Yu ZZ, Mai YW (2010) Toughening polypropylene and its nanocomposites with submicrometer voids. Macromolecules 43(13):5734鈥?739CrossRef
29.Lin Y, Chen H, Chan C-M, Wu J (2011) Effects of coating amount and particle concentration on the impact toughness of polypropylene/CaCO3 nanocomposites. Eur Polym J 47(3):294鈥?04CrossRef
30.Bucknall CB (1977) Toughened plastics. Applied Science, LondonCrossRef
31.Kum CK, Sung YT, Kim YS, Lee HG, Kim WN, Lee HS, Yoon HG (2007) Effects of compatibilizer on mechanical, morphological, and rheological properties of polypropylene/poly (acrylonitrile-butadiene-styrene) blends. Macromol Res 15:308CrossRef
32.Lee HG, Sung YT, Lee YK, Kim WN, Yoon HG, Lee HS (2009) Effects of PP-g-MAH on the mechanical, morphological and rheological properties of polypropylene and poly (acrylonitrile-butadiene-styrene) blends. Macromol Res 17(6):417鈥?23CrossRef
33.Tanniru M, Yuan Q, Misra RDK (2006) On significant retention of impact strength in clay鈥搑einforced high-density polyethylene (HDPE) nanocomposites. Polymer 47(6):2133鈥?146CrossRef
34.Yuan Q, Misra RDK (2006) Impact fracture behavior of clay鈥搑einforced polypropylene nanocomposites.. Polymer 47(12):4421鈥?433CrossRef
35.Bai H, Wang Y, Song B, Huang T, Han L (2009) Effects of nucleating agents on microstructure and fracture toughness of poly(propylene)/ethylene鈥損ropylene鈥揹iene terpolymer blends. J Polym Sci Part B Polym Phys 47(1):46鈥?9CrossRef
36.Yang G, Han L, Ding H, Wu H, Huang T, Li X, Wang Y (2011) Fracture resistance improvement of polypropylene by joint action of core鈥搒hell particles and nucleating agent. Mater Sci Eng A 528(3):1382鈥?390CrossRef
37.Wu H, Li X, Chen J, Shao L, Huang T, Shi Y, Wang Y (2013) Reinforcement and toughening of polypropylene/organic montmorillonite nanocomposite using 尾-nucleating agent and annealing. Compos Part B-Eng 44(1):439鈥?45CrossRef
38.Pawlak A, Galeski A (2005) Plastic deformation of crystalline polymers: the role of cavitation and crystal plasticity.. Macromolecules 38(23):9688鈥?697CrossRef
39.Pawlak A (2007) Cavitation during tensile deformation of high-density polyethylene. Polymer 48(5):1397鈥?409CrossRef
40.Pawlak A, Galeski A (2008) Cavitation during tensile deformation of polypropylene. Macromolecules 41(8):2839鈥?851CrossRef - 作者单位：Omid Momen (1)
Majid Mehrabi-Mazidi (2)
Neda Jahangiri (1)
1. Department of Polymer Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran
2. Polymer Engineering Department, Institute of Polymeric Materials, Sahand University of Technology, Sahand New Town, Tabriz, Iran - 刊物类别：Chemistry and Materials Science
- 刊物主题：Chemistry
Polymer Sciences
Characterization and Evaluation Materials
Soft Matter and Complex Fluids
Physical Chemistry - 出版者：Springer Berlin / Heidelberg
- ISSN：1436-2449
文摘
Attempt was made to improve the properties of isotactic polypropylene (iPP) by simultaneous incorporation of ABS and CaCO3 nanoparticles. The goal was to achieve a balanced toughness and stiffness by the development of ternary PP/ABS/CaCO3 nanocomposite. The effects of compatibilization and composition on the phase morphology, mechanical properties and deformation behavior under impact loadings were systematically studied. The phase structure and mechanical properties of binary PP/ABS and PP/CaCO3 systems was also investigated in detail to clarify the contribution of individual ABS and CaCO3 components in the macroscopic response of ternary hybrid. It was found that the ABS could effectively toughen the PP matrix by the suitable compatibilization. Moreover, the CaCO3 nanoparticles alone serve as stiffener and toughener in the material. Accordingly, the impact toughness of ternary PP/ABS/CaCO3 nanocomposites was larger than those of compatibilized PP/ABS blend and PP/CaCO3 system and, therefore, much higher than that of unmodified iPP. The mechanical properties and toughening mechanisms of different binary and ternary samples were rationalized by fractographic analysis. In the case of Izod impact-fractured samples, the characteristics of fractured surfaces were closely examined at the crack initiation and propagation stages of the impact fracture process. Keywords Morphology Mechanical properties Compatibilization Impact toughness Fractography