Automated Control System for the Assembly of a Composite Punching Tool

详细信息    查看全文

• 作者：A. M. Valiev ; V. G. Shibakov ; D. L. Pankratov
• 关键词：punching tool ; composite tool ; automated system ; modeling ; control ; technological process ; broaching ; shaping
• 刊名：Russian Engineering Research
• 出版年：2016
• 出版时间：February 2016
• 年：2016
• 卷：36
• 期：2
• 页码：142-145
• 全文大小：215 KB
• 参考文献：1.Shibakov, V.G., Simonova, L.A., Mulyukov, R.I., et al., Intellektual’naya sistema formirovaniya tekhnologicheskikh protsessov shtampovochnogo proizvodstva na osnove CALS-tekhnologii (Intelligent System of Development of Technological Processes of Forming Production Based on CALS Technologies), Moscow: Akademiya, 2011.
  2.Okhrimenko, Ya.M. and Tyurin, V.A., Teoriya protsessov kovki: Uchebnoe posobie dlya vuzov (The Theory of Forging: Manual for Higher Education Students), Moscow: Vusshaya Shkola, 1977.
  3.Okhrimenko, Ya.M., Tekhnologiya kuznechno-shtampovochnogo proizvodstva. Uchebnik dlya vuzov (Technology of Forging and Stamping Production: Handbook for Higher Education Students), Moscow: Mashinostroenie, 1976.
  4.Berezkin, V.G., Formoizmenenie pri obrabotke metallov davleniem (Changing of Form at the Metal Pressing), Moscow: Mashinostroenie, 1973.
  
• 作者单位：A. M. Valiev (1)
  V. G. Shibakov (1)
  D. L. Pankratov (1)
  
  1. Naberezhnye Chelny Institute, Kazan Federal University, Naberezhnye Chelny, Russia
  
• 刊物类别：Engineering
• 刊物主题：Engineering Design
  Russian Library of Science
  
• 出版者：Allerton Press, Inc. distributed exclusively by Springer Science+Business Media LLC
• ISSN：1934-8088

文摘

An automated system for simulation and control of the assembly of a composite hole-punching tool is developed. It consists of an information system used in preparations for assembly, with decision-making support on the basis of precedents; and modules for simulation and correction of the assembly process.