参考文献:1.Miyazaki T, Hotta Y (2011) CAD/CAM systems available for the fabrication of crown and bridge restorations. Aust Dent J 56(Suppl 1):97–106. doi:10.1111/j.1834-7819.2010.01300.x PubMed CrossRef 2.Fasbinder DJ (2010) Materials for chairside CAD/CAM restorations. Compend Contin Educ Dent 31:702–4, 706, 708–9 3.Arnetzl GV, Arnetzl G (2011) Adhesive techniques and machineable high-performance polymer restorations for amelogenesis imperfecta in mixed dentition. Int J Comput Dent 14:129–138PubMed 4.Edelhoff D, Beuer F, Schweiger J, Brix O, Stimmelmayr M, Guth JF (2012) CAD/CAM-generated high-density polymer restorations for the pretreatment of complex cases: a case report. Quintessence Int 43:457–467PubMed 5.Baltzer A, Kaufmann-Jinoian V (2007) VITA CAD-Temp for inLab and Cerec 3D. Int J Comput Dent 10:99–103PubMed 6.Jakob F, Jungbauer G, Schneider J et al (2010) Biocompatibility of new CAD/CAM-machinable materials for provisional long-term restorations. J Dent Res 89:2280 (www.dentalresearch.org ) 7.Stawarczyk B, Ender A, Trottmann A, Ozcan M, Fischer J, Hammerle CH (2012) Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens. Clin Oral Investig. doi:10.1007/s00784-011-0670-4 8.Alt V, Hannig M, Wostmann B, Balkenhol M (2011) Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations. Dent Mater 27:339–347. doi:10.1016/j.dental.2010.11.012 PubMed CrossRef 9.Rammelsberg P, Spiegl K, Eickemeyer G, Schmitter M (2005) Clinical performance of metal-free polymer crowns after 3 years in service. J Dent 33:517–523. doi:10.1016/j.jdent.2004.11.012 PubMed CrossRef 10.Fokkinga WA, Kreulen CM, Bronkhorst EM, Creugers NH (2008) Composite resin core-crown reconstructions: an up to 17-year follow-up of a controlled clinical trial. Int J Prosthodont 21:109–115PubMed 11.Vanoorbeek S, Vandamme K, Lijnen I, Naert I (2010) Computer-aided designed/computer-assisted manufactured composite resin versus ceramic single-tooth restorations: a 3-year clinical study. Int J Prosthodont 23:223–230PubMed 12.Creutzfeldt H (2007) A composite material for CAD/CAM-fabricated, metal free long term temporaries. Quintessenz Zahntech 33:348–352 13.Handel G (2002) Wissenschaftliche Stellungnahme der DGZMK: Langzeitprovisorien. Dtsch Zahnärztl Z 57:450 14.Ryge G (1980) Clinical criteria. Int Dent J 30:347–358PubMed 15.Groten M, Axmann D (2004) Time needed for data collection in clinical studies on fixed prosthodontics. Int J Prosthodont 17:651–656PubMed 16.Hickel R, Roulet JF, Bayne S, Heintze SD, Mjor IA, Peters M, Rousson V, Randall R, Schmalz G, Tyas M, Vanherle G (2007) Recommendations for conducting controlled clinical studies of dental restorative materials. Clin Oral Investig 11:5–33. doi:10.1007/s00784-006-0095-7 PubMed CrossRef 17.van Noort R (2012) The future of dental devices is digital. Dent Mater 28:3–12. doi:10.1016/j.dental.2011.10.014 PubMed CrossRef 18.Tan K, Pjetursson BE, Lang NP, Chan ES (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clin Oral Implants Res 15:654–666. doi:10.1111/j.1600-0501.2004.01119.x PubMed CrossRef 19.Walls AW (2010) Cantilever FPDs have lower success rates than end abutted FPDs after 10-years of follow-up. J Evid Based Dent Pract 10:41–43. doi:10.1016/j.jebdp.2009.11.020 PubMed CrossRef 20.v. Mohrenschildt S (2009) Untersuchung zur Bruchfestigkeit von CAD/CAM-gefertigten Seitenzahnbrücken aus Hochleistungspolymer-Kunststoffen: Eine In-vitro-Untersuchung. In: Faculty of Medicine, Dissertation, Ludwig-Maximilians-Universität, Munich 21.Hamakubo T, Sawase T, Yoshida K, Kamada K, Taira Y, Atsuta M (2004) Thephysical properties of a machinable resin composite for esthetic restorations. Dent Mater J 24:24–29CrossRef 22.Edelhoff D, Ozcan M (2007) To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working group 4 materials: cementation. Clin Oral Implants Res 18(Suppl 3):193–204. doi:10.1111/j.1600-0501.2007.01442.x PubMed CrossRef 23.Hill EE, Lott J (2011) A clinically focused discussion of luting materials. Aust Dent J 56(Suppl 1):67–76. doi:10.1111/j.1834-7819.2010.01297.x PubMed CrossRef 24.Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, De Stefano DE (2008) Dental adhesion review: aging and stability of the bonded interface. Dent Mater 24:90–101. doi:10.1016/j.dental.2007.02.009 PubMed CrossRef 25.Frankenberger R, Kramer N, Appelt A, Lohbauer U, Naumann M, Roggendorf MJ (2011) Chairside vs. labside ceramic inlays: effect of temporary restoration and adhesive luting on enamel cracks and marginal integrity. Dent Mater 27:892–898. doi:10.1016/j.dental.2011.05.007 PubMed CrossRef 26.Freitas AC Jr, Rocha EP, dos Santos PH, de Almeida EO, Anchieta RB (2010) All-ceramic crowns over single implant zircon abutment. Influence of young’s modulus on mechanics. Implant Dent 19:539–548. doi:10.1097/ID.0b013e31820030ca PubMed CrossRef 27.Keul C, Muller-Hahl M, Eichberger M, Liebermann A, Roos M, Edelhoff D, Stawarczyk B (2014) Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements. J Dent 42:1105–1114. doi:10.1016/j.jdent.2014.02.020 PubMed CrossRef 28.Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, Lambrechts P, Peumans M (2007) Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater 23:71–80. doi:10.1016/j.dental.2005.12.002 PubMed CrossRef 29.Keul C, Kohen D, Eichberger M, Roos M, Gernet W, Stawarczyk B (2015) The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments. Clin Oral Investig 19:35–43. doi:10.1007/s00784-014-1215-4 PubMed CrossRef 30.Edelhoff D, Schweiger J, Brix O et al (2011) Initial treatment of complex cases with CAD/CAM-generated restorations made from high-performance resins. Quintessenz 62:625–635 31.Wiegand A, Stucki L, Hoffmann R, Attin T, Stawarczyk B (2015) Repairability of CAD/CAM high-density PMMA- and composite-based polymers. Clin Oral Investig. doi:10.1007/s00784-015-1411-x 32.Magne P, So WS, Cascione D (2007) Immediate dentin sealing supports delayed restoration placement. J Prosthet Dent 98:166–174. doi:10.1016/S0022-3913(07)60052-3 PubMed CrossRef 33.Ohlmann B, Gruber R, Eickemeyer G, Rammelsberg P (2008) Optimizing preparation design for metal-free composite resin crowns. J Prosthet Dent 100:211–219. doi:10.1016/S0022-3913(08)60180-8 PubMed CrossRef
作者单位:Fabian Huettig (1) Andreas Prutscher (1) Christoph Goldammer (1) Curt A. Kreutzer (1) Heiner Weber (1)
1. Department of Prosthodontics with Section “Medical Materials and Technology” at the Centre of Dentistry, Oral Medicine and Maxillofacial Surgery with Dental School, Tuebingen University Hospital, Osianderstr. 2-8, 72076, Tübingen, Germany
刊物类别:Medicine
刊物主题:Dentistry
出版者:Springer Berlin / Heidelberg
ISSN:1436-3771
文摘
Objective The clinical performance of polymethylmethacrylate (PMMA)-based fixed dental prostheses (FDP) was evaluated in the indication of long-term temporaries.