Solidification cracking susceptibility of modified 9Cr1Mo steel weld metal during hot-wire laser welding with a narrow gap groove
详细信息 查看全文
- 作者：Rittichai Phaoniam (1)
Kenji Shinozaki (1)
Motomichi Yamamoto (1)
Kota Kadoi (1)
Akito Nishijima (1)
Masayuki Yamamoto (1) - 关键词：Hot wire welding ; Laser welding ; Narrow gap welding ; Solidification cracking
- 刊名：Welding in the World
- 出版年：2014
- 出版时间：July 2014
- 年：2014
- 卷：58
- 期：4
- 页码：469-476
- 全文大小：
- 参考文献：1. Maruyama T, Yoshiba M, Kurokawa K, Kawahara Y, Otsuka N (2011) Development of advanced ultra supercritical fossil power plants in Japan: materials and high temperature corrosion properties. J Materials Science Forum 696:236-41 CrossRef
2. Kimura H, Sato T, Bergins C, Imano S, Saito E (2011) Development of technologies for improving efficiency of large coal-fired thermal power plants. Hitachi review 60(7):365-71
3. Massé T, Lejeail Y (2013) Creep mechanical behavior of modified 9Cr1Mo steel weldments: experimental analysis and modeling. J Nuclear Engineering and Design 254:97-10 CrossRef
4. Fourniera B, Dallea F, Sauzaya M, Longoura J, Salvia M, Ca?sa C, Tourniéa I, Girouxa P-F, Kim S-H (2011) Comparison of various 9-2%Cr steels under fatigue and creep-fatigue loadings at high temperature, J. Mater Sci Eng A 528:6934-945 CrossRef
5. Pankaj Biswas, N.R.Mandal,Parameswaran Vasu, and Shrishail B. Padasalag: Analysis of welding distortion due to narrow-gap welding of upper port plug. J. Fusion Engineering and Design, 85, 780-88 (2010).
6. Cicero M. D. Starling, Paulo V. Marques and Paulo J. Modenesi: Statistical modelling of narrow-gap GTA welding with magnetic arc oscillation. J. Materials Processing Technology, 51, 37-49(1995).
7. Yapp D, Blackman SA (2004) Recent developments in high productivity pipeline welding. J the Braz Soc of Mech Sci & Eng 26-:89-7 CrossRef
8. Liu C, Zhang JX, Xue CB (2011) Numerical investigation on residual stress distribution and evolution during multi pass narrow gap welding of thick-walled stainless steel pipes. J Fusion Engineering and Design 5681:1-
9. N. Gou, J. Zhang, Y. Han, L. Zang, X. Yuan: Effects of welding parameters on metal transfer process in rotating are narrow gap horizontal GMAW, Trans. of JWRI, Special issue on WSE, 5- (2011).
10. R. Phaoniam, K. Shinozaki, M. Yamamoto, K. Kadoi, S. Tsuchiya, A. Nishijima : Development of high efficient hot wire-laser hybrid process for narrow gap welding—welding phenomena and its adequate condition, 65th IIW Annual Assembly, Doc.IV-1095-12 /XII-2093-12/212-12-1253-12.
11. Yamamoto M, Shinozaki K, Kadoi K, Fujita D, INOUE T, Fukahori M, Kitahara Y (2010) Development of welding method for wide gap lap joint of steel sheet using laser welding with hot-wire. Trans JWRI 39(2):44-6
12. Okagaito T, Watanabe H, Shinozaki K, Yamamoto M, Kadoi K, Nishijima A, Phaonaim R (2010) Development of narrow gap hot-wire laser welding process for heat-resistant steel pipe for boiler. National Meeting of Japan Welding Society 90(4):200-01, in Japanese
13. Shinozaki K, Yamamoto M, Kadoi K, Tsuchiya S, Watanabe H, Nagashima T (2010) Investigation of narrow gap hot-wire laser welding phenomena. National Meeting of Japan Welding Society 87:364-65 (in Japanese)
14. Shinozaki K, Yamamoto M, Kadoi K, Kurachi S, Nishijima A, Watanabe H, Nagashima T (2010) Development of multi-pass welding technology using narrow gap hot-wire laser welding process for nickel-based superalloys. National Meeting of Japan Welding Society 87:366-67 (in Japanese)
15. J.L.Seran and et al.: “Development of 9-2Cr martensitic steels for future nuclear system; weldability studied, mechanical characteristics and specification improvements, proceeding of 3rd international topical meeting on high temperature reactor technology (HTR), 1-10(2006).
16. Deng D, Murakawa H (2006) Prediction of welding residual stress in multi-pass butt-welded modified 9Cr-1Mo steel pipe considering phase transformation effect. J Computational Mater Sci 37:209-19 CrossRef
17. Ueno Y, Ishii S, Yamanaka Z (2012) Measurement of weld metal temperature with an immersion-type optical-fiber radiation thermometer without correcting emissivity. J Japanese Welding Society 81(7):17-1, in Japanese
18. Prokhorov NN (1962) Weld Prod 9:1 - 作者单位：Rittichai Phaoniam (1)
Kenji Shinozaki (1)
Motomichi Yamamoto (1)
Kota Kadoi (1)
Akito Nishijima (1)
Masayuki Yamamoto (1)
1. Department of Mechanical Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima, 739-8527, Japan - ISSN：1878-6669
文摘
Hot-wire laser welding with a narrow gap groove was applied to ASTM A213 grade T91 steel in the application of ultra super critical boilers. A filler wire according to AWS A 5.28: ER90S-G was used. The effect of the depth-to-width ratio (D/W) of a weld shape on the susceptibility to solidification cracking was investigated. With a groove width of 3?mm, solidification cracking did not occur with a D/W ratio of less than 0.6 and more than 1.2. The hot-wire laser welding method with a narrow gap groove seemed to be efficient for practical use, when the higher D/W condition was used without solidification cracking. The high temperature strain, which occurred during solidification, was computationally calculated in order to make clear the effect of D/W ratios on the susceptibility of solidification cracking in theory. From in situ observation using a high-speed camera of the hot-wire laser welding phenomena, a three-dimensional Finite Element Method (FEM) was simulated to estimate an equivalent plastic strain in the weld metal during welding. An approach to the moving heat source consistent with such phenomenon was proposed and validated based on experimental measurements. The simulation results presented that a moving heat source by hot-wire laser welding was able to produce a particular weld shape at a higher D/W ratio with a lower strain rate, which corresponded with the relationship between D/W ratios and solidification cracking in experiments. Therefore, such a hybrid process is a very interesting alternative process to reduce the solidification cracking in narrow gap welding, especially in modified 9Cr1Mo steel.