Are the available boiling heat transfer coefficients suitable for silicon microchannel heat sinks?

详细信息    查看全文

• 作者：Yunhua Gan ; Jinliang Xu and Shuangfeng Wang
• 关键词：Silicon microchannel ; Flow boiling ; Heat transfer coefficient ; Empirical correlation
• 刊名：Microfluidics and Nanofluidics
• 出版年：2008
• 出版时间：June, 2008
• 年：2008
• 卷：4
• 期：6
• 页码：575-587
• 全文大小：800.8 KB

文摘

The typical MEMS fabrication of micro evaporators ensures the perfect smooth wall surface that is lack of nucleation sites, significantly decreasing the heat transfer coefficients compared with miniature evaporators fabricated using copper or stainless steel. In the present paper, we performed the boiling heat transfer experiment in silicon triangular microchannel heat sink over a wide parameter range for 102 runs. Acetone was used as the working fluid. The measured boiling heat transfer coefficients versus the local vapor mass qualities are compared with the classical Chen’s correlation and other correlations for macro and miniature capillary tubes. It is found that most of these correlations significantly over-predict the measured heat transfer coefficients. New correlations are given. There are many reasons for such deviations. The major reason is coming from the perfect smooth silicon surface that lowers the heat transfer performances. New theory is recommended for the silicon microchannel heat sink that should be different from metallic capillary tubes.