Stainless steel porous substrates produced by tape casting

详细信息    查看全文

• 作者：Elisa Mercadelli ; Angela Gondolini ; Paola Pinasco…
• 关键词：metals ; powder processing ; microstructure ; metal ; supported solid oxide fuel cells
• 刊名：Metals and Materials International
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：23
• 期：1
• 页码：184-192
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Metallic Materials; Operating Procedures, Materials Treatment; Magnetism, Magnetic Materials; Engineering Thermodynamics, Heat and Mass Transfer; Characterization and Evaluation of Materials; Continuu
• 出版者：The Korean Institute of Metals and Materials
• ISSN：2005-4149
• 卷排序：23

文摘

In this work the technological issues related to the production of tape cast large-area porous stainless steel supports for Solid Oxide Fuel Cells (SOFC) applications were carefully investigated. The slurry formulation was optimized in terms of amount and nature of the organic components needed: rice starch and polymethyl metacrylate were found to be, respectively, the most suitable pore former and binder because easily eliminated during the thermal treatment in reducing atmosphere. The compatibility of the binder system chosen with the most widely used solvents for screen printing inks was also evaluated. Finally the influence of the sintering temperature and of the refractory supports to be used during the thermal treatments onto the production of porous stainless steel supports was discussed. The whole process optimization allows to produce flat, crack-free metallic substrate 900-1000 μm thick, dimensions up to 5×5 cm and with a tailored porosity of 40% suitable for SOFCs application.