Research on dynamic characteristic of softness consolidation abrasives in machining process

详细信息    查看全文

• 作者：Xi Zeng ; Shi-ming Ji ; Ming-sheng Jin…
• 关键词：Laser ; hardened mold ; Machining ; Creep deformation ; Material removal ; Softness consolidation abrasives
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2016
• 出版时间：February 2016
• 年：2016
• 卷：82
• 期：5-8
• 页码：1115-1125
• 全文大小：2,128 KB
• 参考文献：1.Qunli Z, Mykola A, Ruslan Z, Yi P, Volodymyr K, Yao JH (2012) Application of regression designs for simulation of laser cladding. Phys Procedia 39:92–97CrossRef
  2.Wang HM, Tang HB, Cai LX, Cao F, Zhang LY, Yu RL (2005) Microstructure and wear properties of laser clad Ti2Ni 3Si/Ni3Ti multiphase intermetallic coatings. Appl Phys A 80(8):1677–1682CrossRef
  3.Hong YC, Wang MH (2012) Research of microstructure and properties of Ni-based alloy hot sprayed-welding layers by laser remelted and aging treatment. Chinese J Mech Eng 48(10):75–81CrossRef
  4.Dandekar R, Chinmaya Y, Shin C (2013) Multi-scale modeling to predict sub-surface damage applied to laser-assisted machining of a particulate reinforced metal matrix composite. J Mater Process Technol 213:153–160CrossRef
  5.Kwok CT, Leong KI, Cheng FT, Man HC (2003) Microstructural and corrosion characteristics of laser surface-melted plastics mold steels. Mater Sci Eng A 357(1-2):94–103CrossRef
  6.Torkamany MJ, Sabbaghzadeh J, Hamedi MJ (2012) Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels. Mater Des 34:666–672CrossRef
  7.Zeng X, Ji SM, Tan DP, Jin MS, Wen DH, Zhang L (2013) Softness consolidation abrasives material removal characteristic oriented to laser hardening surface. Int J Adv Manuf Technol 69:2323–2332CrossRef
  8.Yao CF, Wang T, Xiao W, Huang XC, Ren JX (2014) Experimental study on grinding force and grinding temperature of Aermet 100 steel in surface grinding. J Mater Process Technol 214(11):2191–2199CrossRef
  9.Sousa FJP, Hosse DS, Reichenbach I, Aurich JC, Seewig J (2013) Influence of kinematics and abrasive configuration on the grinding process of glass. J Mater Process Technol 213(5):728–739CrossRef
  10.Wu SH, Kazerounian K, Gan ZX, Sun YQ (2013) A simulation platform for optimal selection of robotic belt grinding system parameters. Int J Adv Manuf Technol 64(1-4):447–458CrossRef
  11.Song YX, Lv HB, Yang ZH (2012) An adaptive modeling method for a robot belt grinding process. IEEE ASME Trans Mechatron 17(2):309–317CrossRef
  12.Tsuneo K, Mitsuro H (2006) A study of EDM and ECM/ECM-lapping complex machining technology. Int J Mach Tools Manuf 14(46):1804–1810
  13.Chiou YC, Lee RT, Yau CL (2007) A novel method of composite electroplating on lap in lapping process. Int J Mach Tools Manuf 47(2):361–367CrossRef
  14.Shi FG, Zhao B (1998) Modeling of chemical-mechanical polishing with soft pads. Appl Phys A 67(2):249–252CrossRef
  15.Han XS (2014) Investigation of the surface generation mechanism of mechanical polishing engineering ceramics using discrete element method. Appl Phys A 116(4):1729–1739CrossRef
  16.Ji SM, Jin MS, Zhang X, Zhang L, Zhang YD, Yuan JL (2007) Novel gasbag polishing technique for free-form mold. Chinese J Mech Eng 43(8):2–6CrossRef
  17.Kuriyagawa T, Saeki M, Syoji K (2002) Electrorheological fluid-assisted polishing for small three-dimensional parts. Precis Eng 26:370–380CrossRef
  18.Suni J, Jain VK (2009) Rheological characterization of magnetorheological polishing fluid for MRAFF. Int J Adv Manuf Technol 42:656–668CrossRef
  19.Das M, Jain VK, Ghoshdastidar PS (2008) Analysis of magnetorheological abrasive flow finishing (MRAFF) process. Int J Adv Manuf Technol 38:613–621CrossRef
  20.Zeng X, Ji SM, Jin MS, Tan DP, Li JH, Zeng WT (2014) Investigation on machining characteristic of pneumatic wheel based on softness consolidation abrasives. Int J Precis Eng Manuf 2031–2039
  21.Bi ZW, Sun QC, Liu JG, Jin F (2011) The quasistatic response of a granular matter to a localized loading. Mech in Eng 10–16
  22.Ji SM, Li C, Tan DP, Yuan QL, Chi YW, Zhao LH (2011) Study on machinability of softness abrasive flow based on Preston equation. Chinese J Mech Eng 47(17):156–163CrossRef
  23.Ji SM, Zeng X, Jin MS, Tan DP (2013) New finishing method of softness consolidation abrasives and material removal characteristic analysis. Chinese J Mech Eng 49(5):173–181CrossRef
  
• 作者单位：Xi Zeng (1)
  Shi-ming Ji (1)
  Ming-sheng Jin (1)
  Da-peng Tan (1)
  Jiang-qin Ge (1)
  
  1. Key Laboratory of Special Purpose Equipment and Advanced Manufacturing Technology Ministry of Education, Zhejiang University of Technology, No. 18, Chao-wang Road, Hangzhou, 310014, China
  
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering
  Production and Logistics
  Mechanical Engineering
  Computer-Aided Engineering and Design
  
• 出版者：Springer London
• ISSN：1433-3015

文摘

Pneumatic wheel based on softness consolidation abrasives (SCA) is presented as a key machining tool mainly for the improvement of finishing efficiency to free-form surface of laser-hardened molds. In this case, though its softness fits for machining to free-form surface, it cannot keep all abrasives within bounds strictly, but it makes abrasives experience creep deformation, which always leads to unstable machining characteristics. For research on the working rule of SCA, dynamic characteristics of abrasives need to be investigated. Firstly, soft ball model is brought into analysis of the normal and shear contact forces between two particles. By introducing damping coefficient, formulas on displacement and velocity of SCA are given for theory analysis of creep deformation. After that, force chains are established by simulation, which proves that SCA possesses more cutting force than free abrasives. At the same time, creep deformation of SCA is confirmed in accordance with the analysis of velocity of the single particle. Subsequently, combined with the modified Preston formula, comparative machining tests on material removal are carried on a laser-hardened free-form surface. Experimental results show that material removal rate of SCA is higher than that of free abrasive by approximately 34.35 %. Moreover, abrasive size is discussed as a key parameter respectively according to consolidation effects and surface roughness. The final conclusion is that SCA is certified to improve finishing efficiency for laser-hardened surfaces as well as suitable for machining free-form surfaces.