参考文献:1.Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976. 2.Bobrov, V.F., Osnovy teorii rezaniya metallov (The Theory of Metal Cutting), Moscow: Mashinostroenie, 1975. 3.Reznikov, A.N., Teplofizika rezaniya (Thermal Physics of Cutting Processes), Moscow: Mashinostroenie, 1969. 4.Solonenko, V.G. and Ryzhkin, A.A., Rezanie metallov i rezhushchie instrumenty: Uchebnoe posobie dlya vuzov (Metal Cutting and Cutting Instruments: Handbook for Higher Education Students), Moscow: Vysshaya Shkola, 2008. 5. Spravochnik tekhnologa-mashinostroitelya (Handbook of Engineer-Machine Builder), Dal’skii, A.M., Kosilova, A.G., Meshcheryakov, R.K., and Suslov, A.G., Eds., Moscow: Mashinostroenie, 2003, vol. 2. 6.Taratynov, O.V., Influence of cutting regime on contact temperature and durability of instrument, Stanki Instrum., 2004, no. 11, pp. 30–32.
作者单位:N. G. Reka (1) G. N. Kourov (1) A. G. Lyutov (1)
1. Ufa State Aviation-Engineering University, Ufa, Bashkortostan Republic, Russia
刊物类别:Engineering
刊物主题:Engineering Design Russian Library of Science
出版者:Allerton Press, Inc. distributed exclusively by Springer Science+Business Media LLC
ISSN:1934-8088
文摘
A method is proposed for industrial measurement of the temperature in the metal-cutting zone. The method employs the thermal-equilibrium equation to determine the amount by which the local temperature exceeds the ambient value. The concept of a heated body is introduced: the part of the workpiece that is converted to chip and is deformable in the course of cutting. A method of determining the mass of the heated body is formulated and experimentally verified.