参考文献:1.Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976. 2.Taratynov, O.V., Influence of cutting regime on contact temperature and durability of instrument, Stanki Instrum., 2004, no. 11, pp. 30–32. 3.Zoriktuev, V.C., Automated cutting based on the theory of optimal cutting temperature, Vestn. Ufim. Gos. Aviats. Tekhn. Univ., 2009, vol. 12, no. 4, pp. 14–19. 4.Solonenko, V.G. and Ryzhkin, A.A., Rezanie metallov i rezhushchie instrumenty: Uchebnoe posobie dlya vuzov (Metal Cutting and Cutting Instruments: Handbook for Higher Education Students), Moscow: Vysshaya Shkola, 2008. 5.Lyutov, A.G., Ozerov, M.Yu., Kourov, G.N., et al., The analysis of the equipment of the channel of gas removal in the water-heating boiler with the balanced pull as the elements of automatic control system, Vestn. Ufim. Gos. Aviats. Tekhn. Univ., 2011, vol. 15, no. 2, pp. 106–113. 6.Lyutov, A.G., Ozerov, M.Yu., Kourov, G.N., et al., System of automatic control of smoke exhauster pressure of the water-heating boiler with the balanced pull, Vestn. Ufim. Gos. Aviats. Tekhn. Univ., 2011, vol. 15, no. 2, pp. 132–139. 7.Reka, N.G., Dynamic model of the conversion engine torque into a tangential component of cutting force, in Devyataya Vseross. zimnyaya shkola-seminar aspirantov i molodykh uchenykh “Aktual’nye problemy nauki i tekhniki” (The Ninth All-Russ. Winter School-Seminar of Post-Graduate Students and Young Scientists “Modern Problems of Sciences and Engineering”), Ufa: Ufim. Gos. Aviats. Tekhn. Univ., 2014, vol. 2, pp. 178–182.
作者单位:N. G. Reka (1) G. N. Kourov (1) A. G. Lyutov (1)
1. Ufa State Aviation-Engineering University, Ufa, Bashkortostan Republic, Russia
刊物类别:Engineering
刊物主题:Engineering Design Russian Library of Science
出版者:Allerton Press, Inc. distributed exclusively by Springer Science+Business Media LLC
ISSN:1934-8088
文摘
Temperature regulation in the metal-cutting zone is considered. A method is proposed for monitoring the cutting temperature on the basis of a model dependence on the cutting parameters. A dynamic model of the relation between the cutting parameters and the temperature in the cutting zone is established. Models of the elements of the control channel for the cutting-zone temperature are developed. A dynamic model of the control channel for the temperature in the cutting zone is formulated. Recommendations are made regarding the practical application of the dynamic model.