Bearing capacity of steel fiber reinforced reactive powder concrete confined by spirals

详细信息    查看全文

• 作者：Wei Zhou ; Haibo Hu
• 关键词：Steel fiber reinforced ; reactive powder concrete (SFR ; RPC) ; Steel spiral ; Core concrete ; Local pressure ; Local aspect ratio ; Core aspect ratio ; Steel ratio ; Bearing capacity
• 刊名：Materials and Structures
• 出版年：2015
• 出版时间：August 2015
• 年：2015
• 卷：48
• 期：8
• 页码：2613-2628
• 全文大小：6,647 KB
• 参考文献：1.ACI Committee 318 (2008) Building code requirements for structural concrete and commentary. ACI 318-08, American Concrete Institute, Detroit
  2.ACI Committee 544 (1996) Fiber reinforced concrete. ACI 544.1R, American Concrete Institute, Detroit
  3.Ahmed T, Burley El, Rigden S (1998) 鈥淏earing capacity of plain and reinforced concrete loaded over a limited area鈥? ACI Structural Journal 113 3:330鈥?42
  4.Au T, Baird DL (1960) 鈥淏earing capacity of concrete blocks鈥? Journal of the ACI, Proceedings 56 9:869鈥?79
  5.Bais YP, Couture M (1999) Precast, prestressed pedestrian bridge鈥攚orld鈥?fist reactive powder concrete structure. PCI J 6:60鈥?1
  6.Bauschinger J (1876) Tests with blocks of natural stone. Mechanical and Technical Laboratory, Technical University of Munich, vol 6, p 13
  7.Breen JE, Burdet O, Roberts C, Sanders D, Wollmann G (1994) Anchorage zone reinforcement for post-tensioned concrete girders. National Cooperative Highway Research Program Report 356, Washington, DC
  8.Cao S, Yang X, Niu C (1980) Experimental study on failure and strength of concentrated local bearing concrete. Journal of Harbin College of architectural engineering 8 1:1鈥?3 (in Chinese)
  9.Haroon S, Yazdani N, Tawfiq K (2006) 鈥淧osttensioned Anchorage Zone Enhancement with Fiber-Reinforced Concrete鈥? Journal of Bridge Engineering ASCE. 11 5:566鈥?72
  10.Ince R, Arici E (2004) 鈥淪ize effect in bearing strength of concrete cubes鈥? Construction and Building Materials 18 8:603鈥?09
  11.Johnson S (2006) Analytical modeling of fiber reinforced post-tensioned concrete anchorage zones. Ms Dissertation, The Florida State University
  12.Komendant AE (1952) Prestressed concrete structures, 1st edn. McGraw-Hill, New York, pp 172鈥?73
  13.Liu Y, Guan J, Wang Q (1985) 鈥淏earing strength of concrete and its failure mechanism鈥? China Civil Engineering Journal 18 2:53鈥?5 (in Chinese)
  14.Meyerhof GG (1953) 鈥淭he bearing capacity of concrete and rock鈥? Magazine of concrete research 4 12:107鈥?16View Article
  15.National Standard of the People鈥檚 Republic of China (2010) Code for Seismic Design of Buildings. Ministry of Construction of the Peoples鈥?Republic of China, Beijing, GB 50011-2010 (in Chinese)
  16.Niyogi SK (1973) Bearing strength of concrete鈥攇eometric variations. Struct Div J ASCE 99(ST7):1471鈥?490
  17.Niyogi SK (1974) Bearing strength of concrete鈥攕upport, mix, size effect. Struct Div J ASCE 100(ST8):1685鈥?702
  18.Zhou W, Hu H, Zheng W (2013) Bearing capacity of reactive powder concrete reinforced by steel fibers. Constr Build Mater 48:1179鈥?186View Article
  19.Richart FE, Brandtzaeg A, Brown RL (1928) A study of the failure of concrete under combined compressive stresses. Engineering Experiment Station, University of Illinois, Bulletin No.185, Urban
  
• 作者单位：Wei Zhou (1) (2)
  Haibo Hu (1) (2)
  
  1. Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education, Harbin, 150090, People鈥檚 Republic of China
  2. School of Civil Engineering, Harbin Institute of Technology, Harbin, 150090, People鈥檚 Republic of China
  
• 刊物类别：Engineering
• 刊物主题：Structural Mechanics
  Theoretical and Applied Mechanics
  Mechanical Engineering
  Operating Procedures and Materials Treatment
  Civil Engineering
  Building Materials
  
• 出版者：Springer Netherlands
• ISSN：1871-6873

文摘

Based on two basic considerations, (1) the enhancement of bearing capacity by the inclusion of confining spirals and (2) the crack-bridging and energy-absorbing improvements gained by adding steel fibers to the mixture, steel fiber-reinforced reactive powder concrete (SFR-RPC) reinforced by steel spirals can be applied to post-tensioned anchorage zones. Twelve SFR-RPC prisms containing steel spirals and a longitudinal duct hole were loaded at high concentration over a limited circular area. The tests indicated that all specimens retained integrity at failure and exhibited no less than four radial cracks, the entire depression occurred on the loading-end surface, and the splitting tendency generally developed below the first turn of the spiral if the wedge cone formed ahead of the bearing plate. Three major factors related to the geometry of the zone directly influence the bearing capacity: (1) the local aspect ratio of the net area of the concrete supporting the plate to the area of the bearing plate, (2) the core aspect ratio of the area of the bearing plate to the area of the core surrounded by the steel spirals, and (3) the steel ratio of the spirals. An expression of the bearing load capacity is proposed on the basis of the testing results.