Tribological behavior of a friction couple functioning with selective mass transfer

详细信息    查看全文

• 作者：Filip Ilie
• 刊名：Heat and Mass Transfer
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：53
• 期：2
• 页码：625-633
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Engineering Thermodynamics, Heat and Mass Transfer; Industrial Chemistry/Chemical Engineering; Thermodynamics;
• 出版者：Springer Berlin Heidelberg
• ISSN：1432-1181
• 卷排序：53

文摘

Experimental researches on different lubricated friction couples, have confirmed that it is useful to investigate thermodynamic processes which are unstable in lubricant and on the friction couples surfaces in the first stage of the friction process. This presupposes that, in operating conditions, physical–chemical processes which are favourable to friction, such as: polymerization, formation of colloids, formation of other active substances at the contact surfaces and of other compounds with low resistance to shear take place. Friction in such conditions takes place with selective mass transfer, and it is used there where the friction of the mixed and adherence layers is not safe enough, or the durability of the friction couples is not assured. The selective mass transfer allows the transfer of some elements of the materials in contact from one surface to the other, covering them with a thin, superficial layer, with superior properties at minimal friction and wear. The aim of this paper is to analyse the physical–chemical factors and the proper processes for achieving the selective mass transfer for the couple steel/bronze, which in optimal conditions, forms a thin layer of copper on the contact surfaces areas. Also, it presents some studies and researches concerning the tribological behaviour of the surfaces of a friction couple with linear contact (roll/roll) which operates with selective mass transfer, tested on Amsler tribometer.