Study of reduced graphene oxide film incorporated of TiO₂ species for efficient visible light driven dye-sensitized solar cell

详细信息    查看全文

• 作者：Foo Wah Low ; Chin Wei Lai…
• 刊名：Journal of Materials Science: Materials in Electronics
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：28
• 期：4
• 页码：3819-3836
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Optical and Electronic Materials; Characterization and Evaluation of Materials;
• 出版者：Springer US
• ISSN：1573-482X
• 卷排序：28

文摘

The hybrid reduced graphene oxide (rGO) with titanium dioxide (TiO₂) species photoelectrodes forming a TiO₂–rGO nanocomposite (TiO₂–rGO NC) was prepared using a simple hydrothermal technique to enhance their visible light dye-sensitized solar cells (DSSCs) performances compared with the pure reduced graphene oxide (rGO) photoelectrodes. This study aims to determine the optimum loading content of TiO₂ species on the rGO photoelectrodes for improving their visible response in terms of conductivity as well as photoconversion efficiency. A low content of TiO₂ (0.3 wt%) species was successfully incorporated into the rGO photoelectrodes lattice and formed a Ti–O–C bond, which significantly maximized the photocurrent generation efficiency and promoted a charge separation by trapping the photo-induced electrons with 7.2%, which is relatively high compared to the pure rGO photoelectrodes (0.67%). However, the excess TiO₂ species of 0.4 and 0.5 wt% resulted in poor photoconversion efficiency performance attributed to the over photocatalytic reaction occurred leaving extra holes on the counter electrode. Herein, a novel hybrid formation between rGO and TiO₂ nanomaterials by using the one-step hydrothermal technique in order to improve the DSSCs performance which brought a better conductivity, higher photoconversion efficiency (0.67–7.20%), and lower recombination of rGO material was introduced.