Catalysts based on PdO_ZrO2 in the hydrodechlorination reaction of chlorobenzene

详细信息    查看全文

• 作者：T. P. Otroshchenko ; A. O. Turakulova…
• 关键词：PdO/ZrO2 ; PdO_ZrO2 mixed oxides ; hydrodechlorination ; biotemplate ; chlorobenzene
• 刊名：Russian Journal of Physical Chemistry A, Focus on Chemistry
• 出版年：2015
• 出版时间：July 2015
• 年：2015
• 卷：89
• 期：7
• 页码：1163-1172
• 全文大小：1,283 KB
• 参考文献：1.Y. Hashimoto, Y. Uemichi, and A. Ayame, Appl. Catal. A: Gen. 287, 89 (2005).View Article
  2.V. V. Lunin and E. S. Lokteva, Russ. Chem. Bull. 45, 1519 (1996).View Article
  3.K. L. Zanaveskin, L. N. Zanaveskin, V. F. Shvets, et al., Khim. Promyshl. Segodnya, No. 1, 43 (2011).
  4.C. Amorim, G. Yuan, P. M. Patterson, and M. A. Keane, J. Catal. 234, 268 (2005).View Article
  5.N. S. Babu, N. Lingaiah, R. Gopinath, et al., J. Phys. Chem. C 111, 6447 (2007).View Article
  6.R. Gopinath, N. Lingaiah, N. S. Babu, et al., J. Mol. Catal. A: Chem. 223, 289 (2004).View Article
  7.M. A. Keane and D. Yu. Murzin, Chem. Eng. Sci. 56, 3185 (2001).View Article
  8.F. J. Urbano and J. M. Marinas, J. Mol. Catal. A: Chem. 173, 329 (2001).View Article
  9.B. Coq, G. Ferrat, and F. Figueras, J. Catal. 101, 434 (1986).View Article
  10.M. A. Aramendia, V. Borau, I. M. Garcia, et al., J. Catal. 187, 392 (1999).View Article
  11.J. Wambach, A. Wokaun, and A. Baiker, Phys. Chem. Chem. Phys. 1, 5071 (1999).View Article
  12.Y. Shao, Zh. Xu, H. Wan, et al., J. Hazard. Mater. 179, 135 (2010).View Article
  13.A. Reiterer, G. Sinn, and S. E. Stanzl-Tschegg, Mater. Sci. Eng. A 332, 29 (2002).View Article
  14.Ch.-Y. Zuo, Q.-Sh. Li, G. R. Peng, and G.-Zh. Xing, Prog. Nat. Sci.: Mater. Int. 21, 455 (2011).View Article
  15.D. Fengel and G. Wegener, Wood: Chemistry, Ultrastructure, Reactions (Walter de Gruyter, Berlin, New York, 1984; Lesn. Promyshlennost- Moscow, 1988), pp. 8, 17, 52, 103, 176.
  16.K. Narui, K. Furuta, H. Nishita, et al., Catal. Today 45, 173 (1998).View Article
  17.D. Ciuparu, A. Ensuque, and F. Bozon-Verduraz, Appl. Catal. A: Gen. 326, 130 (2007).View Article
  18.C. Amorim and M. A. Keane, J. Colloids Interface Sci. 322, 196 (2008).View Article
  19.L. F. Chen, J. A. Wang, M. A. Valenzuela, et al., J. Alloys Compd. 417, 220 (2006).View Article
  20.M. V. Rahaman and M. A. Vannice, J. Catal. 127, 267 (1991).View Article
  21.S. D. Lin and M. A. Vannice, J. Catal. 143, 563 (1993).View Article
  22.C. Amorim and M. A. Keane, J. Hazard. Mater. 211-12, 208 (2012).View Article
  23.J. M. Moreno, M. A. Aramendia, A. Marinas, et al., Appl. Catal. B: Environ. 59, 275 (2005).View Article
  24.V. I. Kovalchuk and J. L. d’Itri, Appl. Catal. A: Gen. 271, 13 (2004).View Article
  25.A. O. Turakulova, N. V. Zaletova, G. P. Murav’eva, M. V. Burova, and V. V. Lunin, Russ. J. Phys. Chem. A 82, 1403 (2008).View Article
  
• 作者单位：T. P. Otroshchenko (1)
  A. O. Turakulova (1)
  E. S. Lokteva (1)
  E. V. Golubina (1)
  V. V. Lunin (1)
  
  1. Department of Chemistry, Moscow State University, Moscow, 119991, Russia
  
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Physical Chemistry
  Russian Library of Science
  
• 出版者：MAIK Nauka/Interperiodica distributed exclusively by Springer Science+Business Media LLC.
• ISSN：1531-863X

文摘

The possibility of using mixed oxides of palladium and zirconium obtained with biotemplates (cellulose and wood pulp) as the precursor of catalysts for the hydrodechlorination of chlorobenzene is analyzed. The properties of the samples are studied by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), the Brunauer-Emmet-Teller (BET) method, and temperature-programmed reduction (TPR). They are then compared to the properties of a supported analogue. The biomorphic precursors are characterized by high porosity and include micropores, mesopores, and macropores; the results from TPR reveal the presence in the precursors of several forms of PdO that differ by reduction temperature. It is shown that the distribution of palladium in the catalysts obtained by reducing the precursors with hydrogen depends on the method used in synthesizing the precursor. It is shown that the studied catalysts ensure 100% conversion of chlorobenzene at temperatures of 100 to 250°C. It is established that cyclohexane is the principal product in the presence of the supported catalyst across the range of temperatures, while cyclohexane and benzene are detected among the products in the presence of biomorphous samples at temperatures above 130°C. The effect the presence of an admixture of alkaline and alkaline-earth metals in the catalyst has on the selectivity of the process is noted. It is established that the catalysts operate in a stable manner for at least 27 h of use under experimental conditions.