Anti-corrosion properties and structural characteristics of fabricated ternary coatings

详细信息    查看全文

• 作者：O. S. I. Fayomi (1) (2)
  A. P. I. Popoola (1)
  
  1. Department of Chemical ; Metallurgical and Materials Engineering ; Tshwane University of Technology ; P.M.B. X680 ; Pretoria ; South Africa
  2. Department of Mechanical Engineering ; Covenant University ; P.M.B 1034 ; Ota ; Ogun State ; Nigeria
  
• 关键词：interface ; anti ; corrosion ; reinforcement ; structural characterization
• 刊名：Surface Engineering and Applied Electrochemistry
• 出版年：2015
• 出版时间：January 2015
• 年：2015
• 卷：51
• 期：1
• 页码：76-84
• 全文大小：2,422 KB
• 参考文献：1. Tiwari, SK, Sahu, RK, Pramanick, AK, Singh, R (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. J. Surf. Coat. Technol. 205: pp. 4960-4967 CrossRef
  2. Popoola, API, Fayomi, OSI, Popoola, OM (2012) Electrochemical and mechanical properties of mild steel electroplated with Zn-Al. Inter. J. Electrochem. Sci. 7: pp. 4898-4917
  3. Popoola, API, Fayomi, OSI, Popoola, OM (2012) Comparative studies of microstructural, tribological and corrosion properties of plated Zn and Zn-alloy coatings. Inter. J. Electrochem. Sci. 7: pp. 4860-4870
  4. Fayomi, OSI, Popoola, API (2012) An investigation of corrosion and mechanical behavior of Zn coated mild steel in 3.65% NaCl. Inter. J. Electrochem. Sci. 7: pp. 6555-6570
  5. Lekka, M, Kouloumbi, N, Gajo, M, Bonora, PL (2005) Corrosion and wear resistant electrodeposited composite coatings. Electrochem. Acta 50: pp. 4551-4556 CrossRef
  6. Ciubotariu, A, Benea, L, Varsanyi, M, Dragan, V (2008) Electrochemical impedance spectroscopy and corrosion behavior of Al2O3-Ni nano-composite coatings. Electrochem. Acta 53: pp. 4557-4563 CrossRef
  7. Hammami, O, Dhouibi, L, Triki, E (2009) Influence of Zn-Ni alloy electro-deposition techniques on the coating corrosion behavior in chloride solution. Surf. Coat. Technol. 203: pp. 2863-2870 CrossRef
  8. Panagopoulos, CN, Georgiou, EP, Tsoutsouva, MG, Krompa, M (2011) Composite multilayered coatings on mild steel. J. Coat. Technol. Res. 8: pp. 125-133 CrossRef
  9. Fayomi, O.S.I. and Popoola, A.P.I., Chemical interaction, interfacial effect and the microstructural characterization of the induced zinc-aluminum-solanum tuberosum in chloride solution on mild steel, / Research on Chemical Intermediates, 2013, vol. 39, no. 6, DOI 10.1007/s11164-013-1354-2.
  10. Changa, LM, Chena, D, Liub, JH, Zhang, RJ (2009) Effects of different plating modes on microstructure and corrosion resistance of Zn-Ni alloy coatings. J. Alloy Comp. 479: pp. 489-93 CrossRef
  11. Cotell, CM, Sprague, JA, Smidt, FA (1999) ASM Metals Handbook. Surf. Eng. 5: pp. 804
  12. Ger, MG, Grebe, R (2004) Electrochemical deposition of Nickel/SiC composites in the presence of surfactants. Mater. Chem. Physic. 87: pp. 67-74 CrossRef
  13. Gay, PA, Bercot, P, Pagetti, J (2001) Electro-deposition and characterization of Ag-ZrO2 electroplated coatings. Surf. Coat. Technol. 140: pp. 147-154 CrossRef
  14. Sancakoglu, O, Culha, O, Toparli, M, Agaday, B, Celik, E (2011) Co-deposited Zn-submicron sized Al2O3 composite coatings: Production, characterization and micromechanical properties. Mater. Design 32: pp. 4054-4061 CrossRef
  15. Yao, Y, Yao, S, Zhang, L, Wang, H (2007) Electro-deposition and mechanical and corrosion resistance properties of Ni-W/SiC nano-composite coatings. Mater. Letter 61: pp. 67-70 CrossRef
  16. Chen, XH, Chen, CS, Xiao, HN, Cheng, FQ, Zhang, G, Yi, GJ (2005) Corrosion behavior of carbon nanotubes-Ni composite coating. Surf. Coat. Technol. 191: pp. 351-356 CrossRef
  17. Praveen, BM, Venkatesha, TV, Arthoba Naik, Y, Prashantha, K (2007) Corrosion studies of carbon nanotubes-Zn composite coating. Surf. Coat. Technol. 201: pp. 5836-5842 CrossRef
  18. Praveen, BM, Venkatesha, TV, Naik, YA, Prashantha, K (2007) Corrosion behavior of Zn-TiO2 composite coating. Syn. React. Inorg. Met. 37: pp. 461-465 CrossRef
  19. Gomes, A, Almeida, I, Frade, T, Tavares, AC (2010) Zn-TiO2 and ZnNi-TiO2 Nano-composite coatings: Corrosion behavior. Mater. Sci. Forum 636鈥?37: pp. 1079-1083 CrossRef
  20. Prashantha, K, Park, GS (2005) Nano-sized TiO2-filled sulfonated polyethersulfone proton conducting membranes for direct methanol fuel cells. J. Appl. Polym. Sci. 98: pp. 1875-1878 CrossRef
  21. Sachin, HP, Achary, G, Arthoba Naik, Y, Venkatesha, TV (2007) Polynitroaniline as brightener for zincnickel alloy plating from non-cyanide sulphate bath. Bull. Mater. Sci. 30: pp. 57-63 CrossRef
  22. Shibli, SMA, Dilimon, VS, Antony, SP, Manu, R (2006) Incorporation of TiO2 in hot dip zinc coating for efficient resistance to bio-growth. Surf. Coat. Technol. 200: pp. 4791-4796 CrossRef
  23. Mahieu, J, Wit, K, Boeck, A, Cooman, BC (1999) The properties of electrodeposited Zn-Co coatings. J. Mater. Eng. Perform. 8: pp. 561-570 CrossRef
  24. Fayomi, OSI, Tau, VR, Popoola, API, Durodola, BM, Ajayi, OO, Loto, CA, Inegbenebor, OA (2011) Influence of plating parameter and surface morphology on mild steel. J. Mater. Environ. Sci. 3: pp. 271-280
  25. Fustes, J, Gomes, DA, Pereira, MIS (2008) Electro-deposition of Zn-TiO2 nano-composite films-effect of bath composition. J. Solid State Electrochem. 121: pp. 1435-1443 CrossRef
  26. Mohankumar, C, Praveen, K, Venkatesha, V, Vathsala, K, Nayana, O (2012) Electro-deposition and corrosion behavior of Zn-Ni and Zn-Ni-Fe2O3 coatings. J. Coat. Technol. Res. 9: pp. 71-77 CrossRef
  27. Praveen, BM, Venkatesha, TV (2011) Electro-deposition and corrosion resistance properties of Zn-Ni/TiO2 nano-composite coating. Inter. J. Electrochem. 261: pp. 407-410
  28. Dikici, T, Culha, O, Toparli, M (2010) Study of the mechanical and structural properties of Zn-Ni-Co ternary alloy electroplating. J. Coat. Technol. Res. 7: pp. 787-792 CrossRef
  29. Byk, TV, Gaevsaya, TV, Tsybulskaya, O (2008) Effect of electro-deposition conditions on the composition, microstructure, and corrosion resistance of Zn-Ni alloy coatings. Surf. Coat. Technol. 202: pp. 5817-5823 CrossRef
  30. Praveen, BM, Venkatesha, TV (2008) Electro-deposition and properties of Zn-nano-sized TiO2 composite coatings. Appl. Surf. Sci. 254: pp. 2418-2424 CrossRef
  31. Fayomi, OSI, Abdulwahab, M, Popoola, API (2013) Properties evaluation of ternary surfactant-induced Zn-Ni-Al2O3 films on mild steel by electrolytic chemical deposition. J. of Ovonic Research 9: pp. 123-132
  32. Popoola, API, Fayomi, OS (2011) Effect of some process variable on zinc coated low carbon steel substrates. Sci. Res. Essay. 6: pp. 4264-4272
  33. Basavanna, S, Arthoba Naik, Y (2012) Electrochemical and reflectance studies of bright Zn-Co alloy coating. J. Appl. Electrochem. 517: pp. 3287-3291
  34. Vasilyeva, MS, Rudnev, VS, Korotenko, IA, Nedozorov, PM (2012) Production and studying oxide coatings containing manganese and nickel compounds on titanium from electrolyte suspensions. Protection of Metals and Physical Chemistry of Surfaces 48: pp. 106 CrossRef
  35. Zhou, Q, Shao, Z, He, C, Shao, Z, Cai, Q, Gao, W (2007) Impact of surfactants on electro less deposition Ni-P-nano-Al2O3 composite coating. J. of the Chinese Society of Corrosion and Protection 27: pp. 27-30
  36. Ranganatha, S, Venkatesha, TV, Vathsala, K, Punith Kumar, MK (2012) Electrochemical studies on Zn/nano-CeO2 electrodeposited composite coatings. Surf. Coat. Technol. 208: pp. 64-72 CrossRef
  
• 刊物类别：Engineering
• 刊物主题：Manufacturing, Machines and Tools
  Russian Library of Science
  
• 出版者：Allerton Press, Inc. distributed exclusively by Springer Science+Business Media LLC
• ISSN：1934-8002

文摘

In this paper deposition of zinc (Zn)-cobalt (Co) particles and the titanium IV oxide composite (TiO2) by electrodeposition in a single electrolyte bath was studied. Zinc coatings modified with cobalt and titanium IV oxide incorporation were produced using optimized process parameters. Morphological and microstructural properties of the fabricated coatings were characterized by an X-ray diffractometer (XRD) and a scanning electron microscope equipped with energy dispersive spectrometer (SEM/EDS). Mechanical characteristics of the coatings were evaluated by a high impact diamond-based Dura Scan micro hardness tester. The corrosion resistance properties were determined with the VA 669 PG STAT 101 using the linear potentiodynamic polarization method. As a result, it was found that the deposition of admixed Zn-Co submicron sized TiO2 composite particles was successful. A better interfacial interaction was found to exist between the based particulate and the composite. Structural comparison of the deposited coatings with SEM, optical microscope and atomic force microscope images revealed that the homogenous grain structure was formed. Corrosion resistance increased significantly and, in addition, a better micromechanical behavior of the coatings wasattained by changing the parameters and content of Co and TiO2 particulates.