Geology and Metal Contents of the Ruttan volcanogenic massive sulfide deposit, northern Manitoba, Canada

详细信息    查看全文

• 作者：C. Tucker. Barrie ; Craig Taylor and Doreen E. Ames
• 刊名：Mineralium Deposita
• 出版年：2005
• 出版时间：March 2005
• 年：2005
• 卷：39
• 期：8
• 页码：795-812
• 全文大小：901 KB

文摘

The Paleoproterozoic Ruttan Cu–Zn volcanogenic massive-sulfide (VMS) deposit is a large, relatively low grade, bimodal-siliciclastic type deposit in the Rusty Lake volcanic belt of northern Manitoba. The deposit contained over 82.8 million tonnes of massive sulfide, of which 55.7 million tonnes were mined from 1973 to 2002. The deposit consists of a series of moderately to steeply dipping, south-facing lenses that extend along strike at the surface for 1.1 km and to a depth of 1.0 km. These lenses occur within a steeply dipping, bimodal volcanic, volcaniclastic and siliciclastic sequence. In the immediate mine area, transitional calc-alkalic to high-silica (tholeiitic), felsic, and intermediate volcanic/volcaniclastic rocks of the Mine Sequence are host to, and intercalated with, the massive-sulfide lenses. Transitional tholeiitic to calc-alkalic basalt and andesite are present in the footwall sequence, approximately 500 m down-section from the ore horizon. The overlying rocks are predominantly fine-grained volcaniclastics and siliciclastics, but include polyfragmental agglomerate that contains mafic bombs and scoriaceous felsic fragments. Syn-depositional felsic and mafic dikes, sills, and apophyses are ubiquitous throughout the Mine Sequence, including the ore lenses, indicating continued, near-vent magmatism, and volcanism during ore formation. Fabrics in altered hostrocks have consistent, down-plunge stretching lineations to the SSE that suggest the deposit has been elongated by a factor of ~1.2–1.5; otherwise, the deposit is remarkably undeformed. Syn- and post-depositional faults in the mine area have relatively minor displacements up to tens of meters. Proximal (within 200 m) footwall rocks exhibit moderate to strong chloritization, characterized by the upper greenschist to lower amphibolite facies assemblages that include cordierite–almandine–andalusite–sillimanite–biotite ¡À staurolite ¡À anthophyllite ¡À talc, and local silicification. The proximal hanging wall rocks are characterized by sericite ¡À gahnite alteration, which is restricted to within approximately 75 m of the uppermost lenses. Additional gangue minerals are anhydrite and carbonate minerals (siderite, dolomite, ankerite, and calcite), as well as chlorite, sericite, biotite, talc, and quartz. Carbonate (excluding siderite), potassium feldspar, silicification and epidotization are common distal alteration zones in the footwall to the Mine Sequence several kilometers to the northeast. There are three principal groups of massive sulfide lenses; the East lenses, the West lenses, and the Western Anomaly lenses to the far west. In general, Cu is relatively enriched at the stratigraphic base and in the center of the deposit, whereas Zn is enriched upsection and at the outer margins. Some of the Zn-rich ore exhibits primary mineralogical layering. Parts of the West and Western Anomaly lenses show two layers with Cu-rich bases and Zn-rich tops. The massive sulfide is typically 10–40-m thick; one area along the margin of the main lenses is over 130-m thick and may represent deposition adjacent to a syn-depositional fault. The main sulfide phases are pyrite, pyrrhotite, chalcopyrite, sphalerite, and galena, with tetrahedrite as the most abundant trace phase. Gahnite is ubiquitous in the chlorite-rich assemblages adjacent to the ore lenses. The average base, precious and trace metal contents estimated from Cu and Zn concentrates, and from millhead grades and recoveries. Metals easily transported as chloride and bisulfide complexes in hydrothermal fluids including: Pb, Ag, In, Cu, Cd, Au, and Zn are enriched by 1.5–2.5 orders of magnitude in comparison to the bulk continental crust. Other elements such as Sn, Mo, and As are at near-crustal concentrations, whereas Mn, Ga, and Co are significantly depleted in comparison to the crust. Calculated metal concentrations in the average hydrothermal fluid based on the average metal contents are comparable to, or higher than those measured at sediment covered ridge hydrothermal systems, which precipitate much of their metal budget in the subsurface. Average rare earth element contents for the sulfide are light rare earth element enriched (La_N/Yb_N=22) and range from 0.45 to 0.02x chondritic values, with a moderate negative Eu anomaly (Eu*=0.51). Metal and trace element contents in the Ruttan exhalite horizon, and in proximal (within 1–2 km) exhalites along strike from the 0.6 million tonne Dar-2 Cu–Zn deposit 12 km south of Ruttan, have positive Eu anomalies, whereas negative Eu anomalies are present at distance. The positive Eu anomalies reflect high temperature paleoseafloor hydrothermal venting and precipitation of Eu2+-enriched clays and possibly carbonates, and indicate proximity to base-metal deposits. Silver and lead are also enriched in the exhalites near the deposits, whereas Mn is enriched at ~1–3 km along strike, but not consistently.