Biomimetic electrochemical sensor based on molecularly imprinted polymer for dicloran pesticide determination in biological and environmental samples

详细信息    查看全文

• 作者：Monireh Khadem ; Farnoush Faridbod…
• 关键词：Dicloran ; Molecularly imprinted polymer ; Voltammetric sensor ; Carbon paste electrode ; Biological monitoring
• 刊名：Journal of the Iranian Chemical Society
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：13
• 期：11
• 页码：2077-2084
• 全文大小：482 KB
• 刊物主题：Analytical Chemistry; Inorganic Chemistry; Physical Chemistry; Biochemistry, general; Organic Chemistry;
• 出版者：Springer Berlin Heidelberg
• ISSN：1735-2428
• 卷排序：13

文摘

Dicloran pesticide is used to inhibit the fungal spore germination for different crops. Because of the increasing application of pesticides, reliable and accurate analytical methods are necessary. The aim of this work is designing the highly selective sensor to determine the dicloran in biological and environmental samples. Multi-walls carbon nanotubes and a molecularly imprinted polymer (MIP) were used as modifiers in the sensor composition. A dicloran MIP and a nonimprinted polymer (NIP) were synthesized and applied in the carbon paste electrode. After the optimization of electrode composition, it was used to determine the concentration of analyte. Parameters affecting the sensor response were optimized, such as sample pH, electrolyte concentration and its pH, and the instrumental parameters of square wave voltammetry. The MIP-CP electrode showed very high recognition ability in comparison with NIP-CP. The obtained linear range was 1 × 10−6 to 1 × 10−9 mol L−1. The detection limit was 4.8 × 10−10 mol L−1. This sensor was used to determine the dicloran in real samples (human urine, tap and river water samples) without special sample preparation before analysis. All important parameters were optimized, improving the sensor response considerably.