Identification of location errors by a touch-trigger probe on five-axis machine tools with a tilting head

详细信息    查看全文

• 作者：Zhouxiang Jiang ; Song Bao ; Xiangdong Zhou…
• 关键词：Five ; axis machine tools ; Linear axis ; Rotary axis ; Location errors ; Touch ; trigger probe ; Single setup ; Measurements
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2015
• 出版时间：October 2015
• 年：2015
• 卷：81
• 期：1-4
• 页码：149-158
• 全文大小：2,327 KB
• 参考文献：1.Ibaraki S, Knapp W (2012) Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools: a review. Int J Autom Technol 6(2):110鈥?24. doi:10.鈥?929/鈥媏thz-a-007593181
  2.Lee KI, Yang SH (2013) Robust measurement method and uncertainty analysis for position-independent geometric errors of a rotary-axis using a double ball-bar. Int J Precis Eng Manuf 14(2):231鈥?39. doi:10.鈥?007/鈥媠12541-013-0032-z CrossRef
  3.Yi Z, Jianguo Y, Kun Z (2013) Geometric error measurement and compensation for the rotary table of five-axis machine tool with double ball bar. Int J Adv Manuf Technol 65:275鈥?81. doi:10.鈥?007/鈥媠00170-012-4166-4 CrossRef
  4.Abbaszadeh-Mir Y, Mayer JRR, Cloutier G (2002) Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. Int J Prod Res 40(18):4781鈥?797. doi:10.鈥?080/鈥?020754021016445鈥? CrossRef MATH
  5.Zargarbashi SHH, Mayer JRR (2006) Assessment of machine tool trunnion axis motion error, using magnetic double ball bar. Int J Mach Tool Manuf 46:1823鈥?834. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?005.鈥?1.鈥?10 CrossRef
  6.Lee DM, Zankun Z, Lee KI, Yang SH (2011) Identification and measurement of geometric errors for a five-axis machine tool with a tilting head using a double ball-bar. Int J Precis Eng Manuf 12(2):337鈥?43. doi:10.鈥?007/鈥媠12541-011-0044-5 CrossRef
  7.Lee KI, Yang S-H (2013) Measurement and verification of position-independent geometric errors of a five-axis machine tool using a double ball-bar. Int J Mach Tool Manuf 70:45鈥?2. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?013.鈥?3.鈥?10 CrossRef
  8.Tsutsumia M, Tone S, Kato N, Sato R (2013) Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations. Int J Mach Tool Manuf 68:11鈥?0. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?012.鈥?2.鈥?08 CrossRef
  9.Weikert S (2004) R-test, a new device for accuracy measurements on five axis machine tools. CIRP Ann Manuf Technol 53(1):429鈥?32. doi:10.鈥?016/鈥婼0007-8506(07)60732-X CrossRef
  10.Bringmann B, Knapp W (2006) Model-based 鈥榗hase-the-ball鈥?calibration of a 5-axes machining center. CIRP Ann Manuf Technol 55(1):531鈥?34. doi:10.鈥?016/鈥婼0007-8506(07)60475-2 CrossRef
  11.Bringmann B, Besuchet JP, Rohr L (2008) Systematic evaluation of calibration methods. CIRP Ann Manuf Technol 57:529鈥?32. doi:10.鈥?016/鈥媕.鈥媍irp.鈥?008.鈥?3.鈥?14 CrossRef
  12.Bringmann B, Knapp W (2009) Machine tool calibration: geometric test uncertainty depends on machine tool performance. Precis Eng 33:524鈥?29. doi:10.鈥?016/鈥媕.鈥?precisioneng.鈥?2009.鈥?02.鈥?002 CrossRef
  13.Hong CF, Ibaraki S, Matsubara A (2011) Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools. Precis Eng 35:1鈥?1. doi:10.鈥?016/鈥媕.鈥媝recisioneng.鈥?010.鈥?9.鈥?04 CrossRef
  14.Ibaraki S, Oyama C, Otsubo H (2011) Construction of an error map of rotary axes on a five-axis machining center by static R-test. Int J Mach Tool Manuf 51:190鈥?00. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?010.鈥?1.鈥?11 CrossRef
  15.Hong CF, Ibaraki S, Oyama C (2012) Graphical presentation of error motions of rotary axes on a five-axis machine tool by static R-test with separating the influence of squareness errors of linear axes. Int J Mach Tool Manuf 59:24鈥?3. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?012.鈥?3.鈥?04 CrossRef
  16.Hong CF, Ibaraki S (2013) Non-contact R-test with laser displacement sensors for error calibration of five-axis machine tools. Precis Eng 37:159鈥?71. doi:10.鈥?016/鈥媕.鈥?precisioneng.鈥?2012.鈥?7.鈥?12 CrossRef
  17.Zargarbashi SHH, Mayer JRR (2009) Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor. Int J Mach Tool Manuf 49:75鈥?66. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?009.鈥?5.鈥?01 CrossRef
  18.Ibaraki S, Sawada M, Matsubara A, Matsushita T (2010) Machining tests to identify kinematic errors on five-axis machine tools. Precis Eng 34:387鈥?98. doi:10.鈥?016/鈥媕.鈥?precisioneng.鈥?009.鈥?9.鈥?07 CrossRef
  19.Erkan T, Mayer JRR, Dupont Y (2011) Volumetric distortion assessment of a five-axis machine by probing a 3D reconfigurable uncalibrated master ball artifact. Precis Eng 35:116鈥?25. doi:10.鈥?016/鈥媕.鈥媝recisioneng.鈥?010.鈥?8.鈥?03 CrossRef
  20.Mayer JRR (2012) Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact. CIRP Ann Manuf Technol 61:515鈥?18. doi:10.鈥?016/鈥媕.鈥媍irp.鈥?012.鈥?3.鈥?22 CrossRef
  21.Givi M, Mayer JRR (2014) Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. Int J Mach Tool Manuf 87:89鈥?5. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?014.鈥?8.鈥?01 CrossRef
  22.Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tool Manuf 58:44鈥?3. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?012.鈥?3.鈥?02 CrossRef
  23.Ibaraki S, Iritani T, Matsushita T (2013) Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tool Manuf 68:21鈥?9. doi:10.鈥?016/鈥媕.鈥媔jmachtools.鈥?013.鈥?1.鈥?01 CrossRef
  24.ISO 10791 series (2012) Test conditions for machining centres, International Organization for Standardization
  25.ISO 230鈥?:2006 (2006) Test code for machine tools鈥擯art 7: geometric accuracy of axes of rotation
  26.Zhouxiang J, Xiaoqi T, Xiangdong Z (2015) Machining tests for identification of location errors on five-axis machine tools with a tilting head. Int J Adv Manuf Technol. doi:10.鈥?007/鈥媠00170-015-6838-3
  27.Kakino Y, Ihara Y, Shinohara A (1993) Accuracy inspection of NC machine tools by double ball bar method. Hanser Publishers 52鈥?3
  
• 作者单位：Zhouxiang Jiang (1)
  Song Bao (1)
  Xiangdong Zhou (1)
  Xiaoqi Tang (1)
  Shiqi Zheng (1)
  
  1. National NC System Engineering Research Center, Huazhong University of Science & Technology, 1037 Luoyu Road, Wuhan, 430074, China
  
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering
  Production and Logistics
  Mechanical Engineering
  Computer-Aided Engineering and Design
  
• 出版者：Springer London
• ISSN：1433-3015

文摘

Location errors are considered as one class of the fundamental errors of five-axis machine tools. For the improvement of machining accuracy, it is important to propose an efficient and accurate identification method of location errors. This paper uses a touch-trigger probe and a testpiece to identify location errors of a five-axis machine tool with a tilting head. All the measuring procedures are performed based on the single setup of measuring equipment. A model-based decoupling algorithm of squareness errors of linear and rotary axes is proposed. Then, a new probing procedure is proposed based on this algorithm to increase the moving distances of linear axes without additionally auxiliary equipment. This basic idea can also be expanded to other machine configurations, for instances, the one with a tilting-rotary table which is also illustrated. The experimental results demonstrate that this method is efficient and accurate. Keywords Five-axis machine tools Linear axis Rotary axis Location errors Touch-trigger probe Single setup Measurements