刊名:Journal of Materials Engineering and Performance
出版年:2014
出版时间:June 2014
年:2014
卷:23
期:6
页码:2255-2264
全文大小:
参考文献:1. T. Kawabata, H. Fukai, and O. Izumi, Effect of Ternary Additions on Mechanical Properties of TiAl, / Acta Mater., 1998, 46(6), p 2185鈥?194 CrossRef 2. J. Zollinger, J. Lapin, D. Daloz, and H. Combeau, Influence of Oxygen on Solidification Behaviour of Cast TiAl-Based Alloys, / Intermetallics, 2007, 15(10), p 1343鈥?350 CrossRef 3. X.H. Wu, Review of Alloy and Process Development of TiAl Alloys, / Intermetallics, 2006, 14(10-11), p 1114鈥?122 CrossRef 4. F. Appel and R. Wagner, Microstructure and Deformation of Two-Phase 纬-Titanium Aluminides, / Mater. Sci. Eng. R, 1998, 22(5), p 187鈥?68 CrossRef 5. A. Rastkar and B. Shokri, A Multi-Step Process of Oxygen Diffusion to Improve the Wear Performance of a Gamma-Based Titanium Aluminide, / Wear, 2008, 264(11-12), p 973鈥?79 CrossRef 6. Y. Yuan, Z.G. Liu, H.W. Liu, X.N. Zhao, and X.K. Meng, The Precipitation Reaction in a Ag-Modified TiAl Based Intermetallic, as Studied by TEM, / J. Alloys. Compd., 2005, 399(1-2), p 126鈥?31 CrossRef 7. A. Rastkar, A. Bloyce, and T. Bell, Sliding Wear Behaviour of Two Gamma-Based Titanium Aluminides, / Wear, 2000, 240(1-2), p 19鈥?6 CrossRef 8. C. Li, J. Xia, and H. Dong, Sliding Wear of TiAl Intermetallics Against Steel and Ceramics of Al2O3, Si3N4 and WC/Co, / Wear, 2006, 261(5-6), p 693鈥?01 CrossRef 9. X.J. Li, G.A. Cheng, W.B. Xue, R.T. Zheng, and Y.J. Cheng, Wear and Corrosion Resistant Coatings Formed by Microarc Oxidation on TiAl Alloy, / Mater. Chem. Phys., 2008, 107(1), p 148鈥?52 CrossRef 10. S. Gialanella and G. Straffelini, Interplay Between Oxidation and Wear Behavior of the Ti-48Al-2Cr-2Nb-1B Alloy, / Metall. Mater. Trans. A, 1999, 30(8), p 2019鈥?026 CrossRef 11. J. Cheng, J. Yang, J. Ma, Q. Bi, X. Zhang, and L. Fu, The Tribological Behavior of a Ti-46Al-2Cr-2Nb Alloy Under Liquid Paraffine Lubrication, / Tribol. Lett., 2008, 46(3), p 233鈥?41 CrossRef 12. K. Miyoshi, B. Lerch, and S. Draper, Fretting Wear of Ti-48Al-2Cr-2Nb, / Tribol. Int., 2003, 36(2), p 145鈥?53 CrossRef 13. J. Cheng, J. Yang, X.H. Zhang, H. Zhong, J.Q. Ma, F. Li, L.C. Fu, Q.L. Bi, J.S. Li, and W.M. Liu, High Temperature Tribological Behavior of a Ti-46Al-2Cr-2Nb Intermetallics, / Intermetallics, 2012, 31, p 120鈥?26 CrossRef 14. Z.Y. Zhai, Z.Y. Huang, Y. Zhou, Z.L. Zhang, Y.F. Wang, and M.X. Ai, Oxidation Layer in Sliding Friction Surface of High-Purity Ti3SiC2, / J. Mater. Sci., 2004, 39(21), p 6635鈥?637 CrossRef 15. H.X. Zhai, Z.Y. Huang, and M.X. Ai, Tribological Behaviors of Bulk Ti3SiC2 and Influences of TiC Impurities, / Mater. Sci. Eng. A, 2006, 435-436, p 360鈥?70 CrossRef 16. J.F. Li, W. Pan, F. Sato, and R. Watanabe, Mechanical Properties of Polycrystalline Ti3SiC2 at Ambient and Elevated Temperatures, / Acta Mater., 2001, 49(2001), p 937鈥?45 CrossRef 17. M. Radovic, M.W. Barsoum, T. El-Raghy, S.M. Wiederhorn, and W.E. Luecke, Effect of Temperature, Strain Rate and Grain Size on the Mechanical Response of Ti3SiC2 in Tension, / Acta Mater., 2002, 50(6), p 1297鈥?306 CrossRef 18. B.J. Kooi, R.J. Poppen, N.J.M. Carvalho, JThM De Hosson, and M.W. Barsoum, Ti3SiC2: A Damage Tolerant Ceramic Studied with Nano-Indentations and Transmission Electron Microscopy, / Acta Mater., 2003, 51(10), p 2859鈥?872 CrossRef 19. Z.Y. Zhai, H.X. Zhai, Y. Zhou, Z.L. Zhang, and Y.F. Wang, Frictional Layer and Its Antifriction Effect in High-Purity Ti3SiC2 and TiC-Contained Ti3SiC2, / Key Eng. Mater., 2005, 280-283, p 1347鈥?352 CrossRef 20. Z.Y. Zhai, H.X. Zhai, Y. Zhou, Y.F. Wang, and Z.L. Zhang, Sliding Friction Behavior of Bulk Ti3SiC2 Under Different Normal Pressures, / Key Eng. Mater., 2005, 280-283, p 1353鈥?356 CrossRef 21. Z.Y. Zhai, H.X. Zhai, Z.Y. Huang, and C.W. Li, Tribo-Chemical Reaction in Bulk Ti3SiC2 Under Sliding Friction, / Key Eng. Mater., 2004, 280-283, p 1357鈥?360 22. American Society for Testing and Materials, Standard Test Method for Vickers Hardness of Metallic Materials, / ASTM, E92-82 e2 23. American Society for Testing and Materials. Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes鈥?Principle, ASTM B962-08, 2008 24. American Society for Testing and Materials, Standard Test Method for Wear Testing with a Pin-On-Disk Apparatus, / ASTM 1995, G99-95 25. X.L. Shi, Z.S. Xu, M. Wang, W.Z. Zhai, J. Yao, S.Y. Song, A.Q. Din, and Q.X. Zhang, Tribological Behavior of TiAl Matrix Self-Lubricating Composites Containing Silver from 25 to 800聽掳C, / Wear, 2013, 303(1-2), p 486鈥?94 CrossRef 26. C.S. Ramesh and A. Ahamed, Friction and Wear Behaviour of Cast Al 6063 Based In Situ Metal Matrix Composites, / Wear, 2011, 271(9-10), p 1928鈥?939 CrossRef 27. M. Woydt, Tribological Characteristics of Polycrystalline Magneli-Type Titanium Dioxides, / Tribol. Lett., 2000, 8, p 117鈥?30 CrossRef 28. Z.Y. Huang, H.X. Zhai, M.L. Guan, X. Liu, M.X. Ai, and Y. Zhou, Oxide-Film-Dependent Tribological Behaviors of Ti3SiC2, / Wear, 2007, 262(9-10), p 1079鈥?085 CrossRef
作者单位:Zengshi Xu (1) Xiaoliang Shi (1) Qiaoxin Zhang (1) Wenzheng Zhai (1) Jie Yao (1) Long Chen (1) Qingshuai Zhu (1) Yecheng Xiao (1)
1. School of Mechanical and Electronic Engineering, Wuhan University of Technology, 122 Luoshi Road, Wuhan, 430070, China