文摘
Lignin is a potential precursor for low-cost carbon fiber production, but it is difficult to spin and spool lignin because of its complex and interconnected molecular structure. This disadvantage can be overcome by introducing g-polyacrylonitrile (PAN) to lignin. However, the resulting copolymer is insoluble in common organic solvents. In this study, kraft lignin (KL)-g-polyacrylonitrile copolymers with different KL/PAN proportions were prepared via atom transfer radical polymerization (ATRP) method and their solubility in ionic liquids (ILs) was investigated at different temperatures. 1-Ethyl-3-methylimidazolium acetate ([EMIM]Ac), 1,3-dimethylimidazolium methyl sulfate ([MMIM]MeSO4), 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), and 1-butyl-3-methylimidazolium bromide ([BMIM]Br) were used as the ILs. At all investigated temperatures, the highest solubility of KL-g-PAN was observed in [EMIM]Ac, with the order of [MMIM]MeSO4 > BMIM]Br > [BMIM]Cl. The solubility in BMIM]Br and [BMIM]Cl was remarkably low, reaching values of less than 4 g/Kg. The viscosity and surface tension of the KL-g-PAN/[EMIM]Ac solution increased and decreased, respectively, with increasing amounts of PAN and further by the addition of dimethylformamide (DMF) to the solution. FTIR spectra of KL-g-PAN copolymers before and after dissolution suggested that PAN was partially depolymerized from the copolymer during the dissolution process.