Activity and characteristics of “Oxygen-enriched-highly reactive absorbent for simultaneous flue gas desulfurization and denitrification

详细信息    查看全文

• 作者：Yi Zhao ; Tianxiang Guo ; Zili Zang
• 关键词：“Oxygen ; enriched-highly reactive absorbent ; Surface characteristics ; Flue gas circulating fluidized bed ; Simultaneous desulfurization and denitrification
• 刊名：Frontiers of Environmental Science & Engineering
• 出版年：2015
• 出版时间：April 2015
• 年：2015
• 卷：9
• 期：2
• 页码：222-229
• 全文大小：666 KB
• 参考文献：1. Tsai C K. Removal of SO₂ from industrial waste gases. Dissertation for the Doctoral Degree. Lubbock: Texas Tech University, 1996
  2. Reed G D, R, Davis W T, Pudelek R E. Analysis of coal fly ash properties of importance to sulfur dioxide reactivity potential. Environmental Science and Technology, 1984, 18(7): 548-52 CrossRef
  3. Petersen Tom, Karlsson H T. Significance of fly ash in wet-dry scrubbing of SO₂. Chemical Engineering and Technology, 1988, 11(5): 298-05 CrossRef
  4. Izquierdo J F, Cunill F, Martinez J C, Tejero J, Garcia A. Fly ash reactivation for the desulfurization of coal-fired utility station’s flue gas. Separation Science and Technology, 1992, 27(1): 61-2 CrossRef
  5. Peterson J R., Rochelle G T. Aqueous reaction of fly ash and Calcium hydroxide to produce calcium silicate absorbent for flue gas desulfurization. Environmental Science and Technology, 1988, 22(11): 1299-304 CrossRef
  6. Ho C S, Shih S M. Calcium hydroxide/fly ash sorbents for SO₂ removal. Industrial and Engineering Chemistry Research, 1992, 31(4): 1130-135 CrossRef
  7. Davini P. Investigation of flue gas desulphurization by fly ash and calcium hydroxide mixtures. Resources, Conservation and Recycling, 1995, 15(3-): 193-01 CrossRef
  8. Davini P. Investigation of the SO₂ adsorption properties of Ca (OH)₂-fly ash systems. Fuel, 1996, 75(6): 713-16 CrossRef
  9. Fernández J, Renedo J, Garea A, Viguri J, Irabien J A. Preparation and characterization of fly ash / hydrated lime sorbents for SO₂ removal. Powder Technology, 1997, 94(2): 133-39 CrossRef
  10. Li Y, Nishioka, Sadakata M. High calcium utilization and gypsum formation for dry desulfurization process. Energy Fuels, 1999, 13(5): 1015-020 CrossRef
  11. Renedo M J, Fernández J, Garea A, Ayerbe A, Irabien J A. Microstructural changes in the desulfurization reaction at low temperature. Industrial and Engineering Chemistry Research, 1999, 38(4): 1384-390 CrossRef
  12. Shi LM, Xu X C. Study of the effect of fly ash on desulfurization by lime. Fuel, 2001, 80(13): 1969-973 CrossRef
  13. Liu C F, Shih S M, Lin R B. Kinetics of the reaction of Ca(OH)₂/fly ash sorbent with SO₂ at low temperatures. Chemical Engineering Science, 2002, 57(1): 93-04 CrossRef
  14. Lin R B, Shih S M, Liu C F. Structural properties and reactivities of Ca(OH)₂/fly ash sorbents for flue gas desulfurization. Industrial and Engineering Chemistry Research, 2003, 42(7): 1350-356 CrossRef
  15. Liu C F, Shih S M, Lin R B. Kinetic model for the reaction of Ca (OH)₂/fly ash sorbents with SO₂ at Low Temperatures. Industrial and Engineering Chemistry Research, 2004, 43(15): 4112-117 CrossRef
  16. Liu C F, Shih S M, Lin R B. Effect of Ca(OH)₂/fly ash weight ratio on the kinetics of the reaction of Ca(OH)₂/fly ash sorbents with SO₂ at Low temperatures. Chemical Engineering Science,
• 刊物主题：Environment, general;
• 出版者：Springer Berlin Heidelberg
• ISSN：2095-221X

文摘

An “Oxygen-enriched-highly reactive absorbent was prepared by mixing fly ash, lime and a small quantity of KMnO4 for simultaneous desulfurization and denitrification. Removal of SO2 and NO simultaneously was carried out using this absorbent in a flue gas circulating fluidized bed (CFB). The highest simultaneous removal efficiency, 94.5% of SO2 and 64.2% of NO, was achieved under the optimal experiment conditions. Scanning Electron Microscope (SEM) and Accessory X-ray Energy Spectrometer (EDX) were used to observe the surface characteristics of fly ash, lime, “Oxygen-enriched-highly reactive absorbent and the spent absorbent. An ion chromatograph (IC) and chemical analysis methods were used to determine the contents of sulfate, sulfite, nitrate and nitrite in the spent absorbents, the results showed that sulfate and nitrite were the main products for desulfurization and denitrification respectively. The mechanism of removing SO2 and NO simultaneously was proposed based on the analysis results of SEM, EDX, IC and the chemical analysis methods.