Synthesis and characterization of LiNi1/3Co1/3Mn1/3O2 cathode material for rechargeable lithium batteries by polyacrylic acid-assi

详细信息    查看全文

• 作者：Rui Zuo (1)
  Xiaoping Liang (1)
  Zhifeng Liu (2)
  Jian Liu (1)
  Dajun Luo (1)
  Dongmei Li (1)
  Kai Liu (1)
  Xinyu Mao (1)
  
• 关键词：Lithium ; ion battery ; Cathode material ; Sol–gel ; LiNi1/3Co1/3Mn1/3O2 ; Polyacrylic acid
• 刊名：Journal of Sol-Gel Science and Technology
• 出版年：2014
• 出版时间：February 2014
• 年：2014
• 卷：69
• 期：2
• 页码：303-310
• 全文大小：1,197 KB
• 作者单位：Rui Zuo (1)
  Xiaoping Liang (1)
  Zhifeng Liu (2)
  Jian Liu (1)
  Dajun Luo (1)
  Dongmei Li (1)
  Kai Liu (1)
  Xinyu Mao (1)
  
  1. State Key Laboratory of Hollow Fiber Membrane Materials and Processes, School of Materials Science and Engineering, Tianjin Polytechnic University, Tianjin, 300160, People’s Republic of China
  2. School of Materials Science and Engineering, Tianjin Institute of Urban Construction, Tianjin, 300384, People’s Republic of China
  
• ISSN：1573-4846

文摘

Nanocrystalline LiNi1/3Co1/3Mn1/3O2 cathode materials are synthesized by sol–gel method using polyacrylic acid as a chelating agent. The effects of the calcination temperature and calcination time on the structure, morphology, and electrochemical performances of the LiNi1/3Co1/3Mn1/3O2 electrode materials are investigated by X-ray diffraction, scanning electron microscopy and charge–discharge cycling test, respectively. All experiments show that the microscopic structural features and the morphology properties are deeply related with the electrochemical performance. The results show that the nanocrystalline LiNi1/3Co1/3Mn1/3O2 with a particle size of 80?nm sintered at 700?°C for 2?h presents good α-NaFeO2 layer structure and the best electrochemical performance. When it is discharged between 4.4 and 2.8?V at 20?mAg?, the initial specific capacity of the LiNi1/3Co1/3Mn1/3O2 obtained at 700?°C for 2?h is 169.2?mAhg?. The investigated electrode materials retain 151?mAhg? after 30 cycles when cycled at 20?mAg?.