Performance study of Electrical discharge diamond face surface grinding (EDDFSG) on hybrid metal matrix composite

详细信息    查看全文

• 作者：Ram Singar Yadav ; Vinod Yadava
• 关键词：Hybrid metal matrix composites ; Electrical discharge diamond face surface grinding ; MRR and Ra
• 刊名：Journal of Mechanical Science and Technology
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：31
• 期：1
• 页码：317-325
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Mechanical Engineering; Vibration, Dynamical Systems, Control; Industrial and Production Engineering;
• 出版者：Korean Society of Steel Construction
• ISSN：1976-3824
• 卷排序：31

文摘

Hybrid machining techniques are effective means for machining of difficult-to-cut, electrically conductive hard and brittle materials. In the present work, performance characteristics of newly developed Electrical discharge diamond face surface grinding were experimentally studied during machining flat surfaces of a difficult-to-cut hybrid metal matrix composite, which is a new configuration of electrical discharge diamond grinding. Gap current, on and off time are the spark related parameters as well as grinding related parameters such as abrasive grit size, RPM of wheel, and table speed are considered as input process parameters. The role of input process parameters was investigated in machining performance such as MRR and R_a during electrical discharge diamond face surface grinding of Al/SiCp/B₄Cp hybrid metal matrix composite. Scanning electron microscopy was also used to study the recast layers and surface texture of machined surface. Better surface finish with reduced recasts and higher MRR evince the potential applicability of the process.