A self-operated polymer electrolyte fuel cell system operating at dead-end conditions using pure hydrogen and oxygen gases

详细信息    查看全文

• 作者：Cheolnam Yang ; Sungmo Moon ; Yangdo Kim
• 关键词：Fuel cell stack ; PEFC ; Fuel utilization ; Energy flow diagram ; Efficiency
• 刊名：Journal of Mechanical Science and Technology
• 出版年：2015
• 出版时间：August 2015
• 年：2015
• 卷：29
• 期：8
• 页码：3541-3547
• 全文大小：2,390 KB
• 参考文献：[1]P. Costamagna and S. Srinivasan, Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000: Part II. Engineering, technology development and application aspects, Journal of Power Sources, 102 (2001) 253鈥?69.View Article
  [2]D. Shapiro, J. Duffy, M. Kimble and M. Pien, Solarpowered regenerative PEM electrolyzer/fuel cell system, Solar Energy, 79 (2005) 544鈥?50.View Article
  [3]A. Yilanci, I. Dincer and H. K. Ozturk, A review on solarhydrogen/fuel cell hybrid energy systems for stationary applications, Progress in Energy and Combustion Science, 35 (2009) 231鈥?44.View Article
  [4]Z. Abdin, M. A. Alim, R. Saidur, M. R. Islam, W. Rashmi, S. Mekhilef and A. Wadi, Solar energy harvesting with the application of nanotechnology, Renewable and Sustainable Energy Reviews (2013) 837鈥?52.
  [5]O. Z. Sharaf and M. F. Orhan, An overview of fuel cell technology: Fundamentals and applications, Renewable and Sustainable Energy Reviews, 32 (2014) 810鈥?53.View Article
  [6]S. K. Kamarudin, W. R. W. Daud, A. Md. Som, M. S. Takriff and A. W. Mohammad, Technical design and economic evaluation of a PEM fuel cell system, Journal of Power Sources, 157 (2006) 641鈥?49.View Article
  [7]P. L. Zervas, H. Sarimveis, J. A. Palyvos and N. C. G. Markatos, Model-based optimal control of a hybrid power generation system consisting of photovoltaic arrays and fuel cells, Journal of Power Sources, 181 (2008) 327鈥?38.View Article
  [8]A. Ganguly, D. Misra and S. Ghosh, Modeling and analysis of solar photovoltaic-electrolyzer-fuel cell hybrid power system integrated with a floriculture greenhouse, Energy and Buildings, 42 (2010) 2036鈥?043.View Article
  [9]F. Calise, G. Ferruzzi and L. Vanoli, Transient simulation of polygeneration systems based on PEM fuel cells and solar heating and cooling technologies, Energy, 41 (2012) 18鈥?0.View Article
  [10]B. Abderezzak, B. Khelidj and M. T. Abbes, Modeling charge transfer in a PEM fuel cell using solar hydrogen, International Journal of Hydrogen Energy, 39 (2014) 1593鈥?603.View Article
  [11]K. Agbossou, R. Chahine, J. Hamelin, F. Laurencelle, A. Anouar, J.-M. St-Arnaud and T. K. Bose, Renewable energy systems based on hydrogen for remote applications, Journal of Power Sources, 96 (2001) 168鈥?72.View Article
  [12]A. M. Chaparro, J. Soler, M. J. Escudero and L. Daza, Testing an isolated system powered by solar energy and PEM fuel cell with hydrogen generation, Fuel Cells Bulletin, 2003 (2003) 10鈥?2.View Article
  [13]A. Bilodeau and K. Agbossou, Control analysis of renewable energy system with hydrogen storage for residential applications, Journal of Power Sources, 162 (2006) 757鈥?64.View Article
  [14]J. D. Maclay, J. Brouwer and G. S. Samuelsen, Dynamic analyses of regenerative fuel cell power for potential use in renewable residential applications, International Journal of Hydrogen Energy, 31 (2006) 994鈥?009.View Article
  [15]N. A. Ahmed, M. Miyatake and A. K. Al-Othman, Power fluctuations suppression of stand-alone hybrid generation combining solar photovoltaic/wind turbine and fuel cell systems, Energy Conversion and Management, 49 (2008) 2711鈥?719.View Article
  [16]A. Yilanci, I. Dincer and H. K. Ozturk, Performance analysis of a PEM fuel cell unit in a solar-hydrogen system, International Journal of Hydrogen Energy, 33 (2008) 7538鈥?552.View Article
  [17]A. Bergen, L. Pitt, A. Rowe, P. Wild and N. Djilali, Experimental assessment of a residential scale renewableregenerative energy system, Journal of Power Sources, 186 (2009) 158鈥?66.View Article
  [18]C. Ziogou, D. Ipsakis, C. Elmasides, F. Stergiopoulos, S. Papadopoulou, P. Seferlis and S. Voutetakis, Automation infrastructure and operation control strategy in a standalone power system based on renewable energy sources, Journal of Power Sources, 196 (2011) 9488鈥?499.View Article
  [19]P. Thounthong, V. Chunkag, P. Sethakul, S. Sikkabut, S. Pierfederici and B. Davat, Energy management of fuel cell/solar cell/supercapacitor hybrid power source, Journal of Power Sources, 196 (2011) 313鈥?24.View Article
  [20]S. G. Tesfahunegn, 脴. Ulleberg, P. J. S. Vie and T. M. Undeland, Optimal shifting of photovoltaic and load fluctuations from fuel cell and electrolyzer to lead acid battery in a Photovoltaic/hydrogen standalone power system for improved performance and life time, Journal of Power Sources, 196 (2011) 10401鈥?0414.View Article
  [21]Y. Hamada, K. Takeda, R. Goto and H. Kubota, Hybrid utilization of renewable energy and fuel cells for residential energy systems, Energy and Buildings, 43 (2011) 3680鈥?684.View Article
  [22]L. Stameni膰, M. Rajkovi膰 and 膼. Klisi膰, Performance optimization of the BIPV powered electrolyser and fuel cells installation, Energy and Buildings, 51 (2012) 39鈥?7.View Article
  [23]C. Budischak, D. Sewell, H. Thomson, L. Mach and D. E. Veron, Willett Kempton, Cost-minimized combinations of wind power, solar power and electrochemical storage, powering the grid up to 99.9% of the time, Journal of Power Sources, 225 (2013) 60鈥?4.View Article
  [24]M. Hosseini, I. Dincer and M. A. Rosen, Hybrid solar-fuel cell combined heat and power systems for residential applications: Energy and exergy analyses, Journal of Power Sources, 221 (2013) 372鈥?80.View Article
  [25]P. Garc铆a, J. P. Torreglosa, L. M. Fern谩ndez and F. Jurado, Improving long-term operation of power sources in offgrid hybrid systems based on renewable energy, hydrogen and battery, Journal of Power Sources, 265 (2014) 149鈥?59.View Article
  [26]M. Eroglu, E. Dursun, S. Sevencan, J. Song, S. Yazici and O. Kilic, A mobile renewable house using PV/wind/fuel cell hybrid power system, International Journal of Hydrogen Energy, 36 (2011) 7985鈥?992.View Article
  [27]A. J. Appleby, Regenerative fuel cells for space applications, Journal of Power Sources, 22 (1988) 377鈥?85.View Article
  [28]R. Baldwin, M. Pham, A. Leonida, J. McElroy and T. Nalette, Hydrogen oxygen proton-exchange membrane fuel cells and electrolyzers, Journal of Power Sources, 29 (1990) 399鈥?12.View Article
  [29]S. Hauff and K. Bolwin, System mass optimization of hydrogen/oxygen based regenerative fuel cells for geosynchronous space missions, Journal of Power Sources, 38 (1992) 303鈥?15.View Article
  [30]Y. Sone, A 100-W class regenerative fuel cell system for lunar and planetary missions, Journal of Power Sources, 196 (2011) 9076鈥?080.View Article
  [31]A. Kazim, A novel approach on the determination of the minimal operating efficiency of a PEM fuel cell, Renew Energy, 26 (2002) 479鈥?88.View Article
  
• 作者单位：Cheolnam Yang (1) (2)
  Sungmo Moon (1) (3)
  Yangdo Kim (2)
  
  1. Surface Technology Division, Korea Institute of Materials Science, Seoul, Korea
  2. Dept. of Material Science and Engineering, Pusan National University, Pusan, Korea
  3. Advanced Materials Engineering, Korea University of Science and Technology, Seoul, Korea
  
• 刊物类别：Engineering
• 刊物主题：Mechanical Engineering
  Structural Mechanics
  Control Engineering
  Industrial and Production Engineering
  
• 出版者：The Korean Society of Mechanical Engineers
• ISSN：1976-3824

文摘

The present study reports the system configurations of a self-operated Polymer electrolyte fuel cell (PEFC) that is specially designed for dead-end operation of both pure hydrogen and oxygen gas lines, including its operation features and durability. The PEFC stack with 16 unit cells was constructed using homemade membrane electrode assemblies with 300 cm2 of apparent active area and bipolar plates. A self-operated PEFC system was developed using a homemade PEFC stack, balance of plant, and electric control unit for automatic fuel cell system operation. Performance parameters of the self-operated PEFC system, including fuel utilization, parasitic loss, released heat, purge loss, and efficiency of the PEMFC stack and system were evaluated during the automatic operation of the PEFC system. A Daily start-and-stop (DSS) test was also performed for one month to check the durability of the self-operated PEFC system. Electric efficiencies of the PEFC stack and system are approximately 60% and 49%, respectively, at an operating condition of 1.1 kW electric output; no performance degradation of the PEFC system was observed for a month during the DSS test.