Implications of near-rim compositional zoning in rutile for geothermometry, geospeedometry, and trace element equilibration

详细信息    查看全文

• 作者：Matthew J. Kohn ; Sarah C. Penniston-Dorland…
• 关键词：Diffusion ; Geospeedometry ; LA ; ICP ; MS ; Kinetics ; HFSE ; Rutile
• 刊名：Contributions to Mineralogy and Petrology
• 出版年：2016
• 出版时间：October 2016
• 年：2016
• 卷：171
• 期：10
• 全文大小：1,447 KB
• 刊物类别：Earth and Environmental Science
• 刊物主题：Earth sciences
  Geology
  Mineral Resources
  Mineralogy
  
• 出版者：Springer Berlin / Heidelberg
• ISSN：1432-0967
• 卷排序：171

文摘

In principle, compositional profiling of the near-rim region of minerals can provide insight into cooling rates, but presumes that loss or gain of material from the crystal rim is not kinetically restricted. Trace element depth profiles collected for Zr, Hf, Ta, Nb, and U in amphibolite-facies rutile grains of the Catalina Schist, southern California, show significant variability within a single rock: Profiles of the same element among different grains can have significantly different slopes, grains with indistinguishable Zr profiles show vastly different Nb profiles, and grains with indistinguishable Nb profiles show different Zr profiles. Textural and kinetic idiosyncrasies within the matrix apparently affect the ability of specific crystals to accept or release trace elements, and impugn the common assumption that mineral surfaces maintain equilibrium at amphibolite-facies conditions. A new model that limits the flux of Zr from rutile grains helps explain commonly observed compositional profiles, and implies that inversion of compositional profiles assuming equilibrium among grain surfaces will invariably overestimate cooling rates. Few grains may record the low closure temperatures that experimentally determined diffusivities imply. Rather, higher temperatures will be retained, depending on the proximity of reactants and products in the matrix. Silicon diffusion does not control Zr reequilibration in rutile, and relative diffusion coefficients (D’s) of trace elements in rutile are D_Zr ~ D_Hf ~ 10D_Nb ~ 20D_Ta ~ 40D_U.