Investigation on temperature separation and flow behaviour in vortex chamber

详细信息    查看全文

• 作者：Yuhi Matsuno (1)
  Yusuke Fukushima (1)
  Shigeru Matsuo (2)
  Tokitada Hashimoto (2)
  Toshiaki Setoguchi (3)
  Heuy Dong Kim (4)
  
  1. Graduate School of Science and Engineering ; Saga University ; 1 Honjo-machi ; Saga-shi ; Saga ; 840-8502 ; Japan
  2. Department of Advanced Technology Fusion ; Saga University ; 1 Honjo-machi ; Saga ; 840-8502 ; Japan
  3. Institute of Ocean Energy ; Saga University ; 1 Honjo-machi ; Saga-shi ; Saga ; 840-8502 ; Japan
  4. School of Mechanical Engineering ; Andong National University ; 388 Song Cheon Dong ; Andong ; 760-749 ; Korea
  
• 关键词：Compressible flow ; Vortex chamber ; Cavity flow ; Temperature separation
• 刊名：Journal of Thermal Science
• 出版年：2015
• 出版时间：April 2015
• 年：2015
• 卷：24
• 期：2
• 页码：149-154
• 全文大小：682 KB
• 参考文献：1. Takahama, H, Yokohama, H, Ohara, T (1980) Study on Vortex Tubes: Use of Divergent Tube to Shorten Length of Main Chamber. Transactions of the Japan Society of Mechanical Engineers 46: pp. 584-592 6.584" target="_blank" title="It opens in new window">CrossRef
  2. Hatori, Y, Fujimatsu, N, Misu, I (2006) Numerical Simulation of Flow in Vortex Tube. Proceedings of JSME Fluids Engineering Conference, Kawagoe, Japan.
  3. Beliavsky, Y (1980) Experimental Investigation of a Temperature Separation Effect inside a Short Vortex Chamber. Proceedings of the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta. pp. 1482-1487
  4. Beliavsky, Y (2013) The Pressure Gradient Elastic Wave: Energy Transfer Process for Compressible Fluids with Pressure Gradient. Journal of Mechanics Engineering and Automation 3: pp. 53-64
  5. Anish, S, Setoguchi, T, Kim, HD (2013) Computational Investigation of the Energy Separation in Vortex Chamber. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, February. pp. 1-29
  6. Yokoo, K, Matsuo, S, Matsuno, Y, Setoguchi, T, Kim, HD (2014) Flow Characteristic in a Vortex Chamber. Paper of the Japan Society of Mechanical Engineers Kyushu Brunch, Kitakyushu, Paper No.620, (in Japanese).
  
• 刊物类别：Physics and Astronomy
• 刊物主题：Physics
  Mechanics, Fluids and Thermodynamics
  Engineering Fluid Dynamics
  Engineering Thermodynamics and Transport Phenomena
  Chinese Library of Science
  
• 出版者：Science Press, co-published with Springer-Verlag GmbH
• ISSN：1993-033X

文摘

In the previous researches, it is known that the swirl flow in circular pipe causes the temperature separation. Recently, it is shown that the temperature separation occurs in a vortex chamber when compressed air are pumped into this device from the periphery. Especially, in a cavity installed in the periphery of the chamber, the highest temperature was observed. Therefore, it is expected that this device can be used as a heat source in the engineering field. In recent researches, the mechanism of temperature separation in vortex chamber has been investigated by some researchers. However, there are few researches for the effect of diameter and volume of vortex chamber, height of central rod and position of cavity on the temperature separation. Further, no detailed physical explanation has been made for the temperature separation phenomena in the vortex chamber. In the present study, the effects of chamber configuration and position of the cavity on temperature separation in the vortex chamber were investigated experimentally.