Effect of Preliminary Heating of the Binder on the Quality of Glass Composite Pultrusion Rods
详细信息 查看全文
- 作者：S. N. Grigor’ev ; A. N. Krasnovskii ; I. A. Kazakov
- 关键词：pultrusion ; glass fibers ; pressure ; heating ; Darcy’s law ; composite rod
- 刊名：Glass and Ceramics
- 出版年：2015
- 出版时间：November 2015
- 年：2015
- 卷：72
- 期：7-8
- 页码：299-302
- 全文大小：202 KB
- 参考文献：1.S. U. K. Gadam, J. A. Roux, T. A. McCarty, and J. G. Vaughan, “The impact of pultrusion processing parameters on resin pressure rise inside a tapered cylindrical die for glassfibre/epoxy composites,-Composites Sci. Tech., 60, 945 -958 (2000).CrossRef
2.K. S. Raper, J. A. Roux, T. A. McCarty, and J. G. Vaughan, “Investigation of the pressure behavior in a pultrusion die for graphite/epoxy composites,-Composites, Part A, 30, 1123 -1132 (1999).
3.B. T. Astrom and R. B. Pipes, “A modeling approach to thermo-plastic pultrusion,-Formulation of Models: Polymer Composites,No. 14(3), 173 -183 (1993).
4.A. Krasnovskii and I. Kazakov, “Determination of the optimal speed of pultrusion for large-sized composite rods,-J. Encapsul. Adsorp. Sci., No. 2, 21 -26 (2012); doi:10.-236/?jeas.-012.-3004 .
5.S. N. Grigoriev, A. N. Krasnovskii, and I. A. Kazakov, “The friction force determination of large-sized composite rods in pultrusion,-Appl. Composite Mater., 21(4), 651 -659 (2014).CrossRef
6.A. N. Krasnovskii and I. A. Kazakov, “Optimization of structural parameters of dies to increase the quality of composite rods by pultrusion,-Konstr. Kompozit. Mater., No. 4, 16 -23 (2012).
7.A. A. Kutin, A. N. Krasnovskii, and I. A. Kazakov, “The fiber orientation angle determination for a composite anisotropic solid rod in pultrusion,-Adv. Mater. Res., 941 -944, 2273 -2278 (2014).
8.S. N. Grigoriev, A. N. Krasnovskii, and K. V. Kvachev, “Investigation of impregnation fibrous materials in pultrusion process of polymer composite materials,-Intern. Polymer Sci. Tech., 41(7), 59 -62 (2014).
9.S. N. Grigor’ev, A. A. Kutin, A. N. Krasnovskii, and I. A. Kazakov, “Determination of the rotational velocity of a die in the production of composite anisotropic rods by pultrusion,-Ogneup. Tekh. Keram., No. 7 -8, 10 -14 (2014).
10.S. N. Grigor’ev, A. N. Krasnovskii, and K. V. Kvachev, “Permeation of glass fibers during pultrusion of polymer composite materials,-Steklo Keram., No. 12, 443 -445 (2014); S. N. Grigor’ev, A. N. Krasnovskii, and K. V. Kvachev, “Permeation of glass fibers during pultrusion of polymer composite materials,-Glass Ceram., 71(11 -12), 443 -445 (2014).
11.B. R. Gebart, “Permeability of Unidirectional Reinforcements for RTM,-J. Composite Mater., 26(8), 1100 -1133 (1992); doi:10.1177_002199839202600802.CrossRef
12.A. A. Samarskii and E. S. Nikolaev, Methods for Solving Difference Equations [in Russian], Nauka, Moscow (1978). - 作者单位：S. N. Grigor’ev (1)
A. N. Krasnovskii (1)
I. A. Kazakov (1)
1. Moscow State Technological University ‘STANKIN-(MGTU STANKIN), Moscow, Russia - 刊物类别：Chemistry and Materials Science
- 刊物主题：Chemistry
Ceramics,Glass,Composites,Natural Materials
Characterization and Evaluation Materials
Materials Science
Russian Library of Science - 出版者：Springer New York
- ISSN：1573-8515
文摘