Influence of Pearlite Formation on the Ductility Response of Commercial Hadfield Steel

详细信息    查看全文

• 作者：M. Martín ; M. Raposo ; A. Druker ; C. Sobrero…
• 关键词：Hadfield steel ; Pearlite ; Tensile deformation ; Ductility loss ; X ; ray diffraction
• 刊名：Metallography, Microstructure, and Analysis
• 出版年：2016
• 出版时间：December 2016
• 年：2016
• 卷：5
• 期：6
• 页码：505-511
• 全文大小：
• 刊物主题：Metallic Materials; Characterization and Evaluation of Materials; Structural Materials; Surfaces and Interfaces, Thin Films; Nanotechnology;
• 出版者：Springer US
• ISSN：2192-9270
• 卷排序：5

文摘

This manuscript presents the singular event of pearlite occurrence in commercially produced Hadfield steel. A detailed characterization of the microstructure is performed, and its influence on the mechanical properties of the material is analyzed. The found microstructure may be interpreted as carbide formation if observed at the optical microscope. However, it consists of an extremely fine lamellae structure ranging from 40 to 130 nm of thickness. Experimental evidence of pearlite formation is supported by microhardness measurements, X-ray diffraction, and secondary electron microscopy. The pearlite is located on the austenitic grain boundaries and within by means of intragranular islands. The occurrence of this phase is detrimental for the ductility response of the material assessed by means of uniaxial tensile testing and reduction in area determination. It is observed that a pearlite fraction of 20% is responsible for a reduction of 90% in elongation at fracture and a drop of 80% in reduction in area. A short heat treatment performed at 1050 °C allows recovering the ductility response of the material keeping grain size and chemical composition unchanged.