Metallurgical Behaviour and Carbon Diffusion in Buttering Deposits Prepared With and Without Buffer Layers

详细信息    查看全文

• 作者：Dinesh W. Rathod ; Sunil Pandey…
• 关键词：Dissimilar welds ; Buttering ; Carbon diffusion ; Buffer layer ; Metallurgical properties
• 刊名：Acta Metallurgica Sinica (English Letters)
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：30
• 期：2
• 页码：120-132
• 全文大小：
• 刊物主题：Metallic Materials; Spectroscopy/Spectrometry; Organometallic Chemistry; Tribology, Corrosion and Coatings; Nanotechnology; Characterization and Evaluation of Materials;
• 出版者：The Chinese Society for Metals
• ISSN：2194-1289
• 卷排序：30

文摘

Use of a buttering deposit on ferritic steel in dissimilar metal weld (DMW) joint is a common practice in nuclear plants to connect pressure vessel components (ferritic steel) to pipelines (austenitic stainless steel). Carbon migration and metallurgical changes near fusion interface (ferritic steel–austenitic stainless steel) lead to a steeper gradient in material properties, and minimizing this gradient is the major challenge in the manufacturing of DMW joints. Inconel 82 is often deposited on ferritic steel material as buttering to reducing the gradient of physical and attaining material compatibility. Inconel 82/182 fillers are used to minimize the carbon migration, but the results are not truly adequate. In this paper, Ni–Fe alloy (chromium-free) has been used as the intermediate buffer layer in the weld buttering deposit to address the issue of carbon migration and subsequent metallurgical deterioration. The weld pads with and without buffer layers of Ni–Fe alloy have been investigated and compared in detail for metallurgical properties and carbon diffusivities. Ni–Fe buffer layer can significantly control the carbon migration which resists the metallurgical deterioration. It showed the better results in post-weld heat treatment and thermally aged conditions. The buttering deposit with Ni–Fe buffer layer could be the better choice for DMW joints requirements.