参考文献:1. ASTM D3039/D3039M-08: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA (2008). 2. ASTM D7264/D7264M-07: Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA (2007). 3. EN ISO 527 Parts 1, 4, 5, Plastics 鈥?Determination of tensile properties, CEN Members, (1996, 1997, 2009). 4. EN ISO 14125, Fibre-reinforced plastic composites 鈥?Determination of flexural properties, CEN Members, (1998). 5. E. W. Godwin, in: J. M. Hodgkinson (ed.), Mechanical testing of advanced fibre composites, Ch. 4: Tension, CRC Press LL C (2000), pp. 43-74. 6. J. M. Hodgkinson, in: J. M. Hodgkinson (ed.), Mechanical testing of advanced fibre composites, Ch. 7: Flexure, CRC Press LL C (2000), pp. 124-142. 7. MIL-HDBK-17-1F: Composite Materials Handbook, Vol. 1: Polymer Matrix Composites: Guidelines for Characterization of Structural Materials, U.S. Department of Defense, USA, (2002). 8. I. M. Daniel and O. Ishai, Engineering Mechanics of Composite Materials, Oxford University Press, Inc (2006). 9. C. Zweben, W. S. Smith, and M. W.Wardle, in: S. W. Tsai (ed.), Composite Materials: Testing and Design (Fifth Conference) ASTM STP 674, 鈥淭est Methods for Fiber Tensile Strength, Composite Flexural Modulus, and Properties of Fabric-Reinforced Laminates,鈥?American Society for Testing and Materials (1979), pp. 228-262. 10. D. F. Adams, L. A. Carlsson, and R. B. Pipes, Experimental Characterization of Advanced Composite Materials, CRC Press LL C, (2003). 11. Ng, Y-C (2005) Deriving Composite Lamina Properties from Laminate Properties Using Classical Lamination Theory and Failure Criteria. J. Compos. Mater. 39: pp. 1295-1306 CrossRef 12. A. T. Echtermeyer, Laminate Theory Manual, DNV Research, Report No. 91-2052 Rev. 02. 13. Tarnopol鈥檚kii, YM, Kulakov, VL (2001) Test methods for composites. Survey of investigations carried out in the PMI of Latvian Academy of Sciences in 1964-2000. Mech. Compos. Mater. 37: pp. 431-448 CrossRef 14. Kam, TY, Chen, CM, Yang, SH (2009) Material characterization of laminated composite materials using a threepoint-bending technique. Compos. Struct. 88: pp. 624-628 CrossRef 15. L. J. Hart-Smith, in: L. Carlsson, R. L. Crane and K. Uchino, (eds.), 鈥?.07 Backing-out Composite Lamina Strengths from Cross-ply Testing,鈥?Comprehensive Composite Materials, 5, Elsevier Science Ltd. (2000), pp. 149-161. 16. Welsh, JS, Adams, DF (1996) Unidirectional Composite Compression Strengths Obtained by Testing Cross-ply Laminates. J. Compos. Tech. Res. 18: pp. 241-248 CrossRef 17. Carlsson, LA, Adams, DF, Pipes, RB (2013) Basic Experimental Characterization of Polymer Matrix Composite Materials. Polym. Rev. 53: pp. 277-302 CrossRef 18. Ghaemi, H, Fawaz, Z (2003) Experimental evaluation of effective tensile properties of laminated composites. Adv. Compos. Mater. 11: pp. 223-237 CrossRef 19. Vinckenroy, G, Wilde, WP (1995) The use of Monte Carlo techniques in statistical finite element methods for the determination of the structural behavior of composite materials structural components. Compos. Struct. 32: pp. 247-253 CrossRef 20. Shaw, A, Sriramula, S, Gosling, P, Chryssanthopoulos, MK (2010) A critical reliability evaluation of fibre reinforced composite materials based on probabilistic micro and macro-mechanical analysis. Compos. Part B - Eng. 41: pp. 446-453 CrossRef 21. Gayathri, P, Umesh, K, Ganguli, R (2010) Effect of matrix cracking and material uncertainty on composite plates. Reilab. Eng. Syst. Safe. 95: pp. 716-728 CrossRef 22. Sarangapani, G, Ganguli, R (2013) Effect of Ply-Level Material Uncertainty on Composite Elastic Couplings in Laminated Plates. Int. J. Comp. Meth. Eng. Sci. Mech. 14: pp. 244-261 CrossRef 23. Lekou, DJ, Philippidis, TP (2008) Mechanical property variability in FRP laminates and its effect on failure prediction. Compos. Part B - Eng. 39: pp. 1247-1256 CrossRef 24. Echtermeyer, AT, Engh, B, Buene, L (1995) Lifetime and Young鈥檚 modulus changes of glass/phenolic and glass/polyester composites under fatigue. Composites 26: pp. 10-16 CrossRef 25. Giancane, S, Panella, FW, Dattoma, V (2010) Characterization of fatigue damage in long fiber epoxy composite laminates. Int. J. Fatigue 32: pp. 46-53 CrossRef 26. Lasn, K, Klauson, A, Chati, F, D茅cultot, D (2011) Experimental determination of elastic constants of an orthotropic composite plate by using Lamb waves. Mech. Compos. Mater. 47: pp. 435-446 CrossRef 27. Shokrieh, MM, Omidi, MJ (2009) Compressive response of glass-fiber reinforced polymeric composites to increasing compressive strain rates. Compos. Struct. 89: pp. 517-523 CrossRef 28. Shokrieh, MM, Omidi, MJ (2011) Investigating the transverse behavior of Glass-Epoxy composites under intermediate strain rates. Compos. Struct. 93: pp. 690-696 CrossRef 29. A. H. J. Nijhof, in: R. A. Shenoi, J. F. Wellicome, (eds.), Ch. 7: Analysis of Laminates, Composite Materials in Maritime Structures. Vol. 1: Fundamental Aspects of Composites, Cambridge University Press (1993), p. 188. 30. A. T. Nettles, Basic Mechanics of Laminated Composite Plates, NASA Reference Publication 1351 (1994), pp. 28-43. 31. Berube, KA, Lopez-Anido, RA (2010) Variability in the material properties of polymer matrix composites for marine structures. J. ASTM Int. 7: pp. 1-18
刊物类别:Chemistry and Materials Science
刊物主题:Chemistry Characterization and Evaluation Materials Ceramics,Glass,Composites,Natural Materials Mechanics Structural Mechanics Russian Library of Science