Correlation between Cerchar abrasivity index, rock properties, and drill bit lifetime

详细信息    查看全文

• 作者：Mehmet Capik ; Ali Osman Yilmaz
• 关键词：Cerchar abrasivity index ; Mechanical properties ; Equivalent quartz content ; Bit lifetime
• 刊名：Arabian Journal of Geosciences
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：10
• 期：1
• 全文大小：
• 刊物类别：Earth and Environmental Science
• 刊物主题：Earth Sciences, general;
• 出版者：Springer Berlin Heidelberg
• ISSN：1866-7538
• 卷排序：10

文摘

The Cerchar abrasivity index (CAI) is one of the most widely known index method for identification of rock abrasivity. It is a simple and fast testing method providing reliable information on rock abrasiveness. In this study, the relationships between the CAI and some rock properties such as uniaxial compressive strength (UCS), point load strength, Brazilian tensile strength and Schmidt rebound hardness, and equivalent quartz content (EQC) are examined. The relationships between the CAI and drill bit lifetime is also investigated and the type of drill bit wear observed is mentioned. Additionally, the CAI is modeled using simple and multiple linear regression analysis based on the rock properties. Drill bit lifetime is also modeled based on the CAI. The results show that the CAI increases with the increase of the UCS, point load strength, Brazilian tensile strength, L-type and N-type Schmidt rebound hardness, and the EQC. It is concluded that the higher and the lower bit lifetime are obtained for marl and andesitic-basaltic formation, respectively. Moreover, flushing holes, inserted button, button removal, and failures of button on the bits are determined as the type of drill bit wear. The modeling results show that the models based on the UCS and the EQC give the better forecasting performances for the CAI.