OpenCalphad - a free thermodynamic software

详细信息    查看全文

• 作者：Bo Sundman (1)
  Ursula R Kattner (2)
  Mauro Palumbo (3)
  Suzana G Fries (3)
  
  1. INSTN ; CEA Saclay ; Saclay ; 91191 ; France
  2. Materials Science and Engineering Division ; Institute of Standards and Technology ; 100 Bureau Dr. ; Gaithersburg ; 20899 ; MD ; USA
  3. ICAMS ; Ruhr University Bochum ; Universit盲tsstr. 150 ; Bochum ; 44780 ; Germany
  
• 关键词：Computational thermodynamics ; CALPHAD ; Software ; Multicomponent modeling ; Equilibrium calculations ; Simulations ; GNU license
• 刊名：Integrating Materials and Manufacturing Innovation
• 出版年：2015
• 出版时间：December 2015
• 年：2015
• 卷：4
• 期：1
• 全文大小：598 KB
• 参考文献：1. National Science and Technology Council (2011) Materials genome initiative for global competitiveness, Office of Science and Technology Policy, Washington, DC.
  2. National Research Council, Committee on Integrated Computational Materials Engineering (2008) Integrated computational materials engineering: a transformational discipline for improved competitiveness and national security, National Research Council, Committee on Integrated Computational Materials Engineering, Washington, DC.
  3. Olson GB (2014) Preface to the viewpoint set on: The Materials Genome. Scripta Mater 70: 1鈥?. 2013.09.013" target="_blank" title="It opens in new window">CrossRef
  4. Kattner UR, Eriksson G, Hahn I, Schmid-Fetzer R, Sundman B, Swamy V, Kussmaul A, Spencer PJ, Anderson TJ, Chart TG, Costa e Silva A, Jansson B, Lee B-J, Schalin M (2000) Use of thermodynamic software in process modelling and new applications of thermodynamic calculations. Calphad 24: 55鈥?4. CrossRef
  5. Olson G (2013) Genomic materials design: The ferrous frontier. Acta Mater 61: 771鈥?81. 2012.10.045" target="_blank" title="It opens in new window">CrossRef
  6. Hickel T, Kattner UR, Fries SG (2014) Computational thermodynamics: Recent developments and future potential and prospects. Phys Status Solidi B 251: 9鈥?3. 2/pssb.201470107" target="_blank" title="It opens in new window">CrossRef
  7. Olson GB (1997) Computational design of hierarchically structured materials. Science 277: 1237鈥?242. 26/science.277.5330.1237" target="_blank" title="It opens in new window">CrossRef
  8. Reed RC, Tao T, Warken N (2009) Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater 57: 5898鈥?913. 2009.08.018" target="_blank" title="It opens in new window">CrossRef
  9. Xu W, Rivera-D铆az-del-Castillo PEJ, van der Zwaag S (2008) Genetic alloy design based on thermodynamics and kinetics. Phil Mag 88: 1825鈥?833. 2322180" target="_blank" title="It opens in new window">CrossRef
  10. Gheribi AE, Robelin C, Le Digabel S, Audet C, Pelton AD (2011) Calculating all local minima on liquidus surfaces using the FactSage software and databases and the mash adaptive direct search algorithm. J Chem Thermodyn 43: 1323鈥?330. 2011.03.021" target="_blank" title="It opens in new window">CrossRef
  11. Tancret F (2013) Computational thermodynamics, Gaussian processes and genetic algorithms: combined tools to design new alloys. Modelling Simul Mater Sci Eng 21: 045013. 21/4/045013" target="_blank" title="It opens in new window">CrossRef
  12. Saunders N, Kucherenko S, Li X, Miodownik AP, Schille J-P (2001) A new computer program for predicting materials properties. J Phase Equilib 22: 463鈥?69. CrossRef
  13. JMatPro Practical Software for Materials Properties. http://www.sentesoftware.co.uk/jmatpro.aspx. . Accessed 19 December 2014.
  14. Shobu K (2009) CaTCalc: New thermodynamic equilibrium calculation software. Calphad 33: 279鈥?87. 2008.09.015" target="_blank" title="It opens in new window">CrossRef
  15. Bale CW, B茅lisle E, Chartrand P, Decterov SA, Eriksson G, Hack K, Jung I-H, Kang Y-B, Melan莽on J, Pelton AD, Robelin C, Petersen S (2009) FactSage thermochemical software and databases - recent developments. Calphad 33: 295鈥?11. 2008.09.009" target="_blank" title="It opens in new window">CrossRef
  16. MatCalc The Materials Calculator. http://matcalc.tuwien.ac.at/.. Accessed 19 December 2014.
  17. Davies RH, Dinsdale AT, Gisby JA, Robinson JAJ, Martin SM (2002) MTDATA - thermodynamic and phase equilibrium software from the national physical laboratory. Calphad 26: 229鈥?71. 2)00036-6" target="_blank" title="It opens in new window">CrossRef
  18. Cao W, Chen S-L, Zhang F, Wu K, Yang Y, Chang YA, Schmid-Fetzer R, Oates WA (2009) The Pandat software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation. Calphad 33: 328鈥?42. 2008.08.004" target="_blank" title="It opens in new window">CrossRef
  19. Andersson J-O, Helander T, H枚glund L, Shi P, Sundman B (2002) Thermo-Calc & DICTRA, computational tools for materials science. Calphad 26: 273鈥?12. 2)00037-8" target="_blank" title="It opens in new window">CrossRef
  20. Shi P, Engstr枚m A, Sundman B, 脜gren J (2011) Thermodynamic calculations and kinetic simulations of some advanced materials. Mater Sci Forum675-677: 961鈥?74. 28/www.scientific.net/MSF.675-677.961" target="_blank" title="It opens in new window">CrossRef
  21. Liu Z-K, Chen L-Q, Raghavan P, Du Q, Sofo JO, Langer SA, Wolverton C (2004) An integrated framework for multi-scale materials simulations and design. J Comput-Aided Mater Des 11: 183鈥?99. 20-005-3173-2" target="_blank" title="It opens in new window">CrossRef
  22. Liu Z-K, Chen L-Q, Krishna R (2006) Linking length scales via materials informatics. JOM 58(11): 42鈥?0. 226-2" target="_blank" title="It opens in new window">CrossRef
  23. Grafe U, B枚ttger B, Tiaden J, Fries SG (2000) Coupling of multicomponent thermodynamic databases to a phase field model: application to solidification and solid state transformations of superalloys. Scripta Mater 42: 1179鈥?186. 2(00)00355-9" target="_blank" title="It opens in new window">CrossRef
  24. Schneider MC, Gu JP, Beckermann C, Boettinger WJ, Kattner UR (1997) Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall Mater Trans A28A: 1517鈥?531. 214-3" target="_blank" title="It opens in new window">CrossRef
  25. Banerjee DK, Samonds MT, Kattner UR, Boettinger WJ (1997) Coupling of phase diagram calculations for muliticomponent alloys with solidification micromodels is casting simulation software. In: Beech J Jones H (eds)Solidification Processing 1997: Proceedings of the 4th Decennial International Conference on Solidification Processing, 354鈥?57, Department of Engineering Materials, University of Sheffield, Sheffield.
  26. Warnken N, Ma D, Dreverman A, Reed RC, Fries SG, Steinbach I (1997) Phase-field modeling of as-cast microstructure evolution in nickel-based superalloys. Acta Mater 57: 5862鈥?875. 2009.08.013" target="_blank" title="It opens in new window">CrossRef
  27. 10 Reasons Open Source Is Good for Business. http://www.pcworld.com/article/209891/ . Accessed 19 December 2014.
  28. Ince DC, Hatton L, Graham-Cumming J (2012) The case for open computer programs. Nature 482: 485鈥?88. CrossRef
  29. GEM Software (GEMS) Home. http://gems.web.psi.ch. . Accessed 19 December 2014.
  30. MELTS Home Page. http://melts.ofm-research.org/.. Accessed 8 December 2014.
  31. Cool T, Bartol A, Kasenga M, Modi K, Garc铆a RE (2010) Gibbs: Phase equilibria and symbolic computation of thermodynamic properties. Calphad 34: 393鈥?04. 2010.07.005" target="_blank" title="It opens in new window">CrossRef
  32. Snider J, Griva I, Sun X, Emelianenko M (2015) Set based framework for Gibbs energy minimization. Calphad 48: 18鈥?6. 2014.09.005" target="_blank" title="It opens in new window">CrossRef
  33. Gonze X, Beuken J-M, Caracas R, Detraux F, Fuchs M, Rignanese G-M, Sindic L, Verstraete M, Zerah G, Jollet F, Torrent M, Roy A, Mikami M, Ghosez P, Raty J-Y, Allan DC (2002) First-principles computation of material properties: the ABINIT software project. Comput Mater Sci 25: 478鈥?89. 27-0256(02)00325-7" target="_blank" title="It opens in new window">CrossRef
  34. Giannozzi P, Baroni S, Bonini N, Calandra M, Car R, Cavazzoni C, Ceresoli D, Chiarotti GL, Cococcioni M, Dabo I, Dal Corso A, de Gironcoli S, Fabris S, Fratesi G, Gebauer R, Gerstmann U, Gougoussis C, Kokalj A, Lazzeri M, Martin-Samos L, Marzari N, Mauri F, Mazzarello R, Paolini S, Pasquarello A, Paulatto L, Sbraccia C, Scandolo S, Sclauzero G, Seitsonen AP, / et al (2009) Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials. J Phys: Condens Matter 21: 395502.
  35. OpenPhase. http://www.openphase.de/. . Accessed 19 December 2014.
  36. Guyer JE, Wheeler D, Warren JA (2009) FiPy: partial differential equations with Python. Comput Sci Eng 11(3): 6鈥?5. 2009.52" target="_blank" title="It opens in new window">CrossRef
  37. Langer SA, Fuller Jr ER, Carter WC (2001) OOF: an image-based finite-element analysis of materials microstructures. Comput Sci Eng 3(3): 15鈥?3. 2.919261" target="_blank" title="It opens in new window">CrossRef
  38. Eriksson G, Sippola H, Sundman B (1994) A proposal for a general thermodynamic calculation interface. In: Jokilaakso A (ed)1st Colloquium on Process Simulation, 67鈥?03.. Helsinki University of Technology, Helsinki.
  39. TQ-Interface Programmer鈥檚 Guide. http://www.thermocalc.com/support/documentation/ . Accessed 19 December 2014.
  40. Steinbach I, B枚ttger B, Eike J, Warnken N, Fries SG (2007) CALPHAD and phase-field modeling: a successful liaison. J Phase Equilib Diffus 28: 101鈥?06. 2" target="_blank" title="It opens in new window">CrossRef
  41. Kitashima T (2008) Coupling of the phase-field and CALPHAD methods for predicting multicomponent, solid-state phase transformations. Phil Mag 88: 1615鈥?637. 2243857" target="_blank" title="It opens in new window">CrossRef
  42. Xiong H, Huang Z, Wu Z, Conway PP (2011) A generalized computational interface for combined thermodynamic and kinetic modeling. Calphad 35: 391鈥?95. 2011.05.004" target="_blank" title="It opens in new window">CrossRef
  43. Lukas HL, Fries SG, Sundman B (2007) Computational Thermodynamics, the Calphad Method. Cambridge Univ. Press, Cambridge. CrossRef
  44. Sundman B (1981) Application of computer techniques on the treatment of the thermodynamics of alloys. PhD thesis, KTH Stockholm, Sweden.
  45. Hillert M (1981) Some viewpoints on the use of a computer for calculating phase diagrams. Physica103B: 31鈥?0.
  46. Jansson B (1984) Computer operated methods for equilibrium calculations and evaluation of thermochemical model parameters, PhD thesis, KTH Stockholm, Sweden.
  47. Lukas HL, Weiss J, Henig E-T (1982) Strategies for the calculation of phase diagrams. Calphad 6: 229鈥?51. 2)90004-9" target="_blank" title="It opens in new window">CrossRef
  48. Chen S-L, Chou K-C, Chang YA (1993) On a new strategy for phase diagram calculation. 1. basic principles. Calphad 17: 237鈥?50. CrossRef
  49. Chen S-L, Chou K-C, Chang YA (1993) On a new strategy for phase diagram calculation. 2. binary systems. Calphad 17: 287鈥?02. CrossRef
  50. Thermo-Calc Database Manager鈥檚 Guide. http://www.thermocalc.com/support/documentation/ . Accessed 19 December 2014.
  51. NIST Repositories. http://nist.matdl.org/, https://materialsdata.nist.gov/dspace/xmlui.. Accessed 19 December 2014.
  52. Bratberg J, Mao H, Kjellqvist L, Engstr枚m A, Mason P, Chen Q (2012) The development and validation of a new thermodynamic database for Ni-based alloys. In: Huron ES, Reed RC, Hardy MC, Mills MJ, Montero RE, Portella PD, Telesman J (eds)Superalloys 2012: 12 ^Th International Symposium on Superalloys, 803鈥?12.. TMS (The Minerals, Metals & Materials Society), Warrendale, PA.
  53. Palumbo M, Fries SG, Hammerschmidt T, Abe T, Crivello J-C, Al Hasan Breidi A, Joubert J-M, Drautz R (2014) First-principles based phase diagrams and thermodynamic properties of tcp phases in Re-X systems (X = Ta, V, W). Comput Mater Sci 81: 433鈥?45. 2013.08.051" target="_blank" title="It opens in new window">CrossRef
  54. Lejaeghere K, Van Speybroeck V, Van Oost G, Cottenier S (2014) Error estimates for solid-state density-functional theory predictions: an overview by means of the ground-state elemental crystals. Crit Rev Solid State Mater Sci 39: 1鈥?4. 2013.772503" target="_blank" title="It opens in new window">CrossRef
  55. Campbell CE, Kattner UR, Liu Z-K (2014) The development of phase-based property data using the CALPHAD method and infrastructure needs. Integr Mater Manuf Innov 3: 12. 2193-9772-3-12" target="_blank" title="It opens in new window">CrossRef
  56. Palumbo M, Burton B, Costa e Silva A, Fultz B, Grabowski B, Grimvall G, Hallstedt B, Hellman O, Lindahl B, Schneider A, Turchi PEA, Xiong W (2014) Thermodynamic modelling of crystalline unary phases. Phys Status Solidi B 251: 14鈥?2. 2/pssb.201350133" target="_blank" title="It opens in new window">CrossRef
  57. Becker CA, 脜gren J, Baricco M, Chen Q, Decterov SA, Kattner UR, Perepezko JH, Pottlacher GR, Selleby M (2014) Thermodynamic modelling of liquids: CALPHAD approaches and contributions from statistical physics. Phys Status Solidi B 251: 33鈥?2. 2/pssb.201350149" target="_blank" title="It opens in new window">CrossRef
  58. K枚rmann F, Al Hasan Breidi A, Dudarev SL, Dupin N, Ghosh G, Hickel T, Korzhavyi P, Mu帽oz JA, Ohnuma I (2014) Lambda transitions in materials science: recent advances in CALPHAD and first-principles modelling. Phys Status Solidi B 251: 53鈥?0. 2/pssb.201350136" target="_blank" title="It opens in new window">CrossRef
  59. Hammerschmidt T, Abrikosov IA, Alf猫 D, Fries SG, H枚glund L, Jacobs MHG, Ko脽mann J, Lu X-G, Paul G (2014) Including the effects of pressure and stress in thermodynamic functions. Phys Status Solidi B 251: 81鈥?6. 2/pssb.201350156" target="_blank" title="It opens in new window">CrossRef
  60. Rogal J, Divinski SV, Finnis MW, Glensk A, Neugebauer J, Perepezko JH, Schuwalow S, Sluiter MHF, Sundman B (2014) Perspectives on point defect thermodynamics. Phys. Status Solidi B 251: 96鈥?29. 2/pssb.201350155" target="_blank" title="It opens in new window">CrossRef
  61. OpenCalphad. http://www.opencalphad.org/ . https://github.com/sundmanbo/opencalphad.. Accessed 19 December 2014.
  62. Hillert M, Jansson B, Sundman B, 脜gren J (1985) A two-sublattice model for molten solutions with different tendency for ionization. Metall Trans A16A: 261鈥?66. 2816052" target="_blank" title="It opens in new window">CrossRef
  63. Hillert M, Selleby M, Sundman B (2009) An attempt to correct the quasichemical model. Acta Mater 57: 5237鈥?244. 2009.07.026" target="_blank" title="It opens in new window">CrossRef
  
• 刊物主题：Metallic Materials; Characterization and Evaluation of Materials; Structural Materials; Surfaces and Interfaces, Thin Films; Nanotechnology;
• 出版者：Springer-Verlag
• ISSN：2193-9772

文摘

Thermodynamic data are essential for the understanding, developing, and processing of materials. The CALPHAD (Calculation of Phase Diagrams) technique has made it possible to calculate properties of multicomponent systems using databases of thermodynamic descriptions with models that were assessed from experimental data. A large variety of data, such as phase diagram and solubility data, including consistent thermodynamic values of chemical potentials, enthalpies, entropies, thermal expansions, heats of transformations, and heat capacities, can be obtained from these databases. CALPHAD calculations can be carried out as stand-alone calculations or can be carried out coupled with simulation codes using the result from these calculations as input. A number of CALPHAD software are available for the calculation of properties of multicomponent systems, and the majority are commercial products. The OpenCalphad (OC) software, discussed here, has a simple programming interface to facilitate such integration in application software. This is important for coupling validated thermodynamic as well as kinetic data in such simulations for obtaining realistic results. At present, no other high quality open source software is available for calculations of multicomponent systems using CALPHAD-type models, and it is the goal of the OC source code to fill this gap. The OC software is distributed under a GNU license. The availability of the source code can greatly benefit scientists in academia as well as in industry in the development of new models and assessment of model parameters from both experimental data and data from first principles calculations.