Fabrication of hollow In2O3–ZnO microtubules by a simple biotemplate method and their gas-sensing properties
详细信息 查看全文
- 作者：Han Wang ; Haiying Li ; Shouchun Li ; Li Liu…
- 刊名：Journal of Materials Science: Materials in Electronics
- 出版年：2017
- 出版时间：January 2017
- 年：2017
- 卷：28
- 期：1
- 页码：958-962
- 全文大小：
- 刊物类别：Chemistry and Materials Science
- 刊物主题：Optical and Electronic Materials; Characterization and Evaluation of Materials;
- 出版者：Springer US
- ISSN：1573-482X
- 卷排序：28
文摘
Biomorphic In2O3–ZnO hollow microtubules were synthesized by using cotton as template and followed by calcination. This environmental-friendly method using biomaterials as templates can be used to synthesize metal oxide semiconductor materials with specific morphologies. The structural and microscopy characterization were carried out with X-ray diffraction, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy. The SEM images display the porous structure of the as-obtained hollow microtubules, which is beneficial to increase gas sensing properties of materials. Gas sensors based on In2O3-doped ZnO hollow microtubules were investigated and the test results demonstrate the excellent acetone sensing properties of such porous materials. The response of In2O3–ZnO hollow microtubule sensors to 100 ppm acetone at the optimum temperature of 300 °C is 62.5, meanwhile the response and recovery times are 3 and 7 s, respectively. Moreover, even at 0.1 ppm of acetone detectable response can be observed, and the value is 2.82. At the same time the sensors have selectivity to acetone.