文摘
Combined effects of hurricane wind and surge can pose significant threats to coastal cities. Although current design codes consider the joint occurrence of wind and surge, information on site-specific joint distributions of hurricane wind and surge along the US Coast is still sparse and limited. In this study, joint hazard maps for combined hurricane wind and surge for Charleston, South Carolina (SC), were developed. A stochastic Markov chain hurricane simulation program was utilized to generate 50,000?years of full-track hurricane events. The surface wind speeds and surge heights from individual hurricanes were computed using the Georgiou’s wind field model and the Sea, Lake and Overland Surges from Hurricanes (SLOSH) model, respectively. To validate the accuracy of the SLOSH model, the simulated surge levels were compared to the surge levels calculated by another state-of-the-art storm surge model, ADCIRC (Advanced Circulation), and the actual observed water elevations from historical hurricane events. Good agreements were found between the simulated and observed water elevations. The model surface wind speeds were also compared with the design wind speeds in ASCE 7-10 and were found to agree well with the design values. Using the peak wind speeds and maximum surge heights, the joint hazard surfaces and the joint hazard maps for Charleston, SC, were developed. As part of this study, an interactive computer program, which can be used to obtain the joint wind speed and surge height distributions for any location in terms of latitude and longitude in Charleston area, was created. These joint hazard surfaces and hazard maps can be used in a multi-hazard design or risk assessment framework to consider the combined effects of hurricane wind and surge.