Growth of 3C-SiC on Si(100) by LPCVD using a modified process after the clean step
详细信息 查看全文
- 作者：Zhifei Zhao ; Yun Li ; Zhijun Yin ; Zhonghui Li
- 刊名：Journal of Materials Science: Materials in Electronics
- 出版年：2016
- 出版时间：July 2016
- 年：2016
- 卷：27
- 期：7
- 页码：7095-7099
- 全文大小：1,074 KB
- 刊物类别：Chemistry and Materials Science
- 刊物主题：Chemistry
Optical and Electronic Materials
Characterization and Evaluation Materials - 出版者：Springer New York
- ISSN：1573-482X
- 卷排序：27
文摘
A modified method is applied to grow a void-free 3C-SiC thin film of better crystal quality on the Si(100) substrate in a mixed gas of C3H8, SiH4 and H2 using low pressure chemical vapor deposition. The modified method adds a low temperature and low pressure heat treatment step after the clean step and subsequent a high flow carbon-based precursor gas-on step. The X-ray intensity of the 3C-SiC(200) peak is enhanced intensively using this modified method. The better crystal quality of 3C-SiC is confirmed by both X-ray diffraction and Raman spectra data. The modified method leads to a better crystal quality and surface morphology of the 3C-SiC film grown on Si(100) due to the better carbonized surface morphology. Moreover, the modified method can completely remove the void formation during the whole process. Morphological and structure analysis using scanning electron microscopy and transmission electron microscopy reveal no void defects at the 3C-SiC/Si(100) interface.