Analog modeling of normal faulting above Middle East domes during regional extension
详细信息   在线全文   PDF全文下载
摘要

We study the effects of planform dome shape on fault patterns developing with and without concurrent regional extension oriented oblique to the long axis of the dome. The motivation was the need to understand fault and fracture patterns in two adjacent mature hydrocarbon fields in the Middle East: one, an elliptical dome, and one, an irregularly shaped dome. The largest faults have throws of approximately 30 m (~98 ft), which is close to the resolution limit of older two-dimensional seismic reflection data. The known fault trends are not parallel to the highest transmissivity direction but could form compartment boundaries. Fault and fracture patterns developed over the modeled domes provide insight into the populations of faults and fractures that are likely to exist in the reservoirs but have been undetected because they are at or below the resolution limit of reflection seismic data. Major domal structural elements, crestal fault systems, end splay systems, and radial faults are observed in modeled domes rising both with and without concurrent regional extension. Experimental results indicate that fault and fracture patterns are influenced by the effects of dome shape, regional extension, and relative timing of uplift with respect to regional extension. The expression of particular sets of faults and fractures associated with concurrent doming and regional extension depends on the interaction among regional extension, outer arc extension over the dome, and tangential extension around the dome margins. Our results also indicate that the two adjacent natural domes possibly experienced different kinematic histories from those previously interpreted.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700