Hydraulic piston coring of late Neogene and Quaternary sections in the Caribbean
详细信息      bulletin.geoscienceworld.org/content/91/7/433.full.pdf">PDF全文下载
摘要

Leg 68 of the Deep Sea Drilling Project used the newly developed Hydraulic Piston Corer (HPC) to recover two virtually continuous, undisturbed sections of late Neogene and Quaternary sediment. The sites are located in the western Caribbean (Site 502, 4 holes) and in the eastern equatorial Pacific (Site 503, 2 holes). The sediment of Site 502 is primarily foram-bearing nanno marl which accumulated at about 3 to 4 cm/thousand yr. The bottom of Site 502 (228.7 m) is ∼ 8 m.y. old. The sediment of Site 503 is primarily siliceous calcareous ooze which accumulated at about 2 to 3 cm/thousand yr. The bottom of Site 503 (235.0 m) is ∼ 8 m.y. old.

The magnetostratigraphy of both sites was determined on the R.V. Glomar Challenger with a long-core spinner magnetometer. All paleomagnetic boundaries through the Gilbert were identified in Site 502; most of them were identified in Site 503. The sediment at both sites shows a distinct cyclicity of calcium carbonate content. These relatively high accumulation rate, continuous, undisturbed HPC cores will enable a wide variety of high-resolution biostratigraphic, paleoclimatic, and paleoceanographic studies heretofore not feasible.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700