Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites

详细信息	查看全文 | 推荐本文 |

• 作者：Denni Kurniawan^a ; Byung Sun Kim^b ; ^{kbs@kims.re.kr} ; Ho Yong Lee^a ; Joong Yeon Lim^a
• 关键词：A. Polymer&ndash ; matrix composites (PMCs) ; A. Fibers ; B. Physical properties ; E. Surface treatments
• 刊名：Composites Part B ; Engineering
• 出版年：2012
• 期刊代码：18_13598368
• 类别：ms
• 出版时间：April, 2012
• 卷：43
• 期：3
• 页码：1010-1014
• 文件大小：627 K

摘要

This study evaluates the effects of atmospheric pressure glow discharge plasma polymerization on basalt fiber to the properties of basalt fiber/polylactic acid composite. Plasma exposure time was the object of interest so the basalt fiber was exposed to the glow for 0.5, 1.5, 3, 4.5, and 6 min, respectively. Characterization was conducted on the plasma polymerized fibers by identifying the molecular bonds and surface morphology. Properties (mechanical and thermal) and water absorption behavior of the fabricated composites were tested. Plasma exposure time on BF affected mechanical properties of its BF/PLA composite, showing a decline in mechanical properties until the BF was plasma polymerized beyond 1.5 min. Optimum plasma polymerization on BF was for 4.5 min of plasma exposure time where the composite鈥檚 strength and modulus were 45%and 18%higher, respectively, compared to those of untreated one.