Ultrasonic backscattering in polycrystals with elongated single phase and duplex microstructures

详细信息	查看全文 | 推荐本文 |

• 作者：O.I. Lobkis¹ ; L. Yang ; J. Li ; S.I. Rokhlin ; ^{rokhlin.2@osu.edu}
• 关键词：Ultrasonic backscattering ; Polycrystals ; Ultrasonic attenuation
• 刊名：Ultrasonics
• 出版年：2012
• 期刊代码：4_0041624X
• 类别：ph
• 出版时间：August, 2012
• 卷：52
• 期：6
• 页码：694-705
• 文件大小：927 K

摘要

An analytical solution for a three dimensional integral representation of the backscattering (BS) coefficient in polycrystals with elongated (generally ellipsoidal) grains is obtained; it is a natural generalization of the known explicit result for the BS coefficient in polycrystals with spherical grains. New insights into the dependence of the BS signal on frequency and averaged ellipsoidal grain radii are obtained. In particular it has been shown that the dominant factor for the backscattering is the averaged interaction length of the ellipsoidal grain in the direction of wave propagation, instead of the ellipsoidal cross-section. The theory was applied to a simplified model of Ti alloy duplex microstructure and was compared with experiment. For the experimental data analysis directional backscattering ratios are introduced and shown to be advantageous for characterization of duplex elongated microstructures/microtextures. In addition to the geometrical parameters of the elongated microtextures, the BS directional ratios depend on the newly introduced nondimensional material parameter q. The parameter q exhibits the relative contribution of the second phase (crystallites) to the backscattering signal, the effect of which is measurable and important. Comparison of the model with experiment shows there is a significant advantage in using the directional ratios of backscattering coefficients for data analysis.