Behaviour of inclined, tapered and STS square CFST stub columns subjected to axial load

详细信息	查看全文 | 推荐本文 |

• 作者：D. Lam^a ; ^{d.lam1@bradford.ac.uk} ; X.H. Dai^a ; L.H. Han^b ; Q.X. Ren^b ; W. Li^b
• 关键词：Concrete-filled steel stub column ; Inclined ; Tapered ; Straight&ndash ; tapered&ndash ; straight ; Concrete confinement ; Square hollow section ; Numerical modelling ; Parametric study
• 刊名：Thin-Walled Structures
• 出版年：2012
• 期刊代码：175_02638231
• 类别：et
• 出版时间：May, 2012
• 卷：54
• 期：Complete
• 页码：94-105
• 文件大小：2029 K

摘要

This paper describes the finite element method using ABAQUS to model the axial compressive behaviour of inclined, tapered and straight-tapered-straight (STS) concrete filled steel tubular stub (CFST) columns with square hollow sections. The accuracy of the numerical model was verified by comparing the numerical predictions with experimental study of the 200脳200脳3.75 RHS filled with C60 concrete with inclined angle of 0-9掳 and tapered angle of 0-4掳. The results show that the compressive behaviours, load vs. strain relationship and failure mode predicted by the numerical simulations were agreeable with experimental results. After the validation, a parametric study was performed with 3 typical steel hollow sections (200脳200脳3.75 RHS, 300脳300脳6.3 RHS and 400脳400脳8.0 RHS) and extended the inclined angle and tapered angle to 0-15掳 and 0-12掳 respectively. The parametric study highlights some of the behaviour observed in test and extends the application range. In addition, reduction factor for calculating the axial capacity of this form of CFST columns are proposed.