Simulation of temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube
- 作者：Ren-guo GUAN ; guanrg@smm.neu.edu.cn ; Zhan-yong ZHAO ; Run-ze CHAO ; Chao LIAN ; Jing-lin WEN
- 关键词：6201 aluminum alloy ; semisolid ; rheoforming extrusion ; extending ; tube ; temperature
- 刊名：Transactions of Nonferrous Metals Society of China
- 出版年：2012
- 期刊代码：12_10036326
- 类别：ms
- 出版时间：May, 2012
- 卷：22
- 期：5
- 页码：1182-1189
- 文件大小：931 K
摘要
A continuous semisolid extending extrusion (CSEP) method was proposed. Temperature field and metal flow during continuous semisolid extending extrusion process of 6201 alloy tube were studied. During the process, the temperature in the roll-shoe cavity decreases gradually, and the isothermal lines of the alloy deviate from the shoe side to the work roll side in the roll-shoe gap. Metal flow velocity decreases gradually from the surface of the work roll to the surface of the shoe. In the extrusion mould, alloy temperature decreases gradually from the entrance to the exit and from the center to the sidewall of the mould. The extending cavity is radially filled with the alloy. The flow lines in the tube corresponding to the centers of the splitflow orifices and the welding gaps are dense, and the corresponding harness values are high; there are 8 transitional bands between them. In order to prepare 6201 alloy tubes with good surface quality, the pouring temperature from 750 掳C to 780 掳C was suggested.