Effect of exhaust gas recirculation (EGR) contamination of diesel engine oil on wear

详细信息	查看全文 | 推荐本文 |

• 作者：S. Aldajah ; O.O. Ajayi ; G.R. Fenske ; I.L. Goldblatt
• 关键词：EGR ; Soot particles ; Friction ; Wear ; Diesel engine ; Oil
• 刊名：Wear
• 出版年：2007
• 期刊代码：183_00431648
• 类别：et
• 出版时间：10 September 2007
• 卷：263
• 期：1-6
• 页码：93-98
• 文件大小：1322 K

摘要

Exhaust gas recirculation (EGR) is one of the effective means to reduce the NO_X emission from diesel engines. Returning exhaust product to the diesel engine combustion chamber accelerated the degradation of the lubricant engine oil, primarily by increasing the total acid number (TAN) as well as the soot content and, consequently, the viscosity. These oil degradation mechanisms were observed in engine oil exposed to EGR during a standard Cummins M-l 1 diesel engine test. Four-ball wear tests with M-50 balls showed that, although the used oils slightly decrease the friction coefficients, they increased the ball wear by two orders of magnitude when compared to tests with clean oil. Wear occurred primarily by an abrasive mechanism, but in oil with the highest soot loading of 12%, scuffing and soot particle embedment were also observed. Laboratory wear tests showed a linear correlation with the TAN, while the crosshead wear during the engine test was proportional to the soot content.