Development of an in vitro method for determination of methane production kinetics using a fully automated in vitro gas system鈥擜 modelling approach

详细信息	查看全文 | 推荐本文 |

• 作者：M. Ramin ; ^{mohammad.ramin@slu.se} ; P. Huhtanen
• 关键词：aNDFom ; neutral detergent fibre assayed with a heat stable amylase and expressed exclusive of residual ash ; aNDFomD ; aNDFom digestibility ; aNDSom ; neutral detergent soluble excluding ash ; AOMD ; apparent organic matter digestibility ; CP ; crude protein ; DM
• 刊名：Animal Feed Science and Technology
• 出版年：2012
• 期刊代码：7_03778401
• 类别：abs
• 出版时间：22 June, 2012
• 卷：174
• 期：3-4
• 页码：190-200
• 文件大小：512 K

摘要

The objective of the present study was to estimate methane production using the kinetic parameters from an automated in vitro gas production (GP) system in a mechanistic, dynamic rumen model. Four sample sizes [300 mg (5 g/l), 600 mg (10 g/l), 900 mg (15 g/l) and 1200 mg (20 g/l)] of timothy hay were incubated in 60 ml buffered rumen fluid in an automated in vitro system to determine methane and total gas production. A logarithmic model (R² > 0.99) was fitted to methane data to estimate methane concentrations at time intervals of 0.2 h. The first-order gas production rates were not different (P=0.18) with values of 0.072, 0.061, 0.061 and 0.059/h for the sample size of 300, 600, 900 and 1200 mg, respectively. The methane production rates were 0.052, 0.046, 0.046 and 0.045/h, respectively. Predicted methane production decreased linearly (PLIN < 0.01) as the sample size increased from 300 (36.9 ml/g dry matter, DM) to 1200 mg (28.2 ml/g DM). After 48 h of incubation total volatile fatty acids (VFA) production decreased (PLIN < 0.01) as the sample size increased from 300 to 1200 mg (4.41 mmol/g DM and 3.82 mmol/g DM, respectively). Neutral detergent fibre digestibility (aNDFomD), apparent organic matter digestibility (AOMD) and true organic matter digestibility (TOMD) decreased (PLIN = 0.01) as the sample size increased (0.479, 0.433 and 0.681 for 300 mg, and 0.369, 0.379 and 0.614 for 1200 mg of sample size, respectively). Actual methane production (24 and 48 h of incubation) was strongly correlated (R² = 0.97) with the methane production predicted from VFA stoichiometry (VFA measured at 24 and 48 h of incubation). It is concluded that in vitro GP measurements can be successfully used to estimate kinetic parameters of methane production and consequently to predict methane production. It seems that sample size did not affect the first-order production rate of methane and therefore, it is possible to use greater amounts of substrate in the in vitro GP system up to 1000 mg (16.6 g/l).