Superior techniques for disposal of highly radioactive waste (HLW)

详细信息	查看全文 | 推荐本文 |

• 作者：Roland Pusch^a ; ^{drawrite.se@gmail.com} ; Richard Weston^b
• 关键词：Clay ; Canisters ; Disposal ; Radioactive waste
• 刊名：Progress in Nuclear Energy
• 出版年：2012
• 期刊代码：42_01491970
• 类别：pw
• 出版时间：August, 2012
• 卷：59
• 期：Complete
• 页码：75-85
• 文件大小：1983 K

摘要

The Swedish Nuclear Fuel and Waste Company (SKB) has recently worked out a concept, KBS-3V, for disposal of highly radioactive waste in the form of spent reactor fuel, and asked for the Government鈥檚 approval and licensing. It implies blasting of tunnels at about 400聽m depth and boring of large-diameter canister deposition holes extending vertically from the tunnel floor. The rock stresses will be critically high in the construction phase and lead to failure by spalling when the heat pulse from the canisters evolves. The canisters will be surrounded by dense expansive 鈥渂uffer鈥?clay for minimizing groundwater flow around and along them but the long-term performance of either of them is not adequately proven and the placement is impractical and risky. Four major changes of the concept would make it satisfactory. One involves reorientation of the deposition holes from vertical to 45掳 inclination in two directions for reducing the risk of rock failure. A second is to prepare ready-made stiff units of 鈥渟upercontainers鈥?with highly compacted blocks of clay tightly surrounding the canisters for simpler and safer installation of clay blocks and canisters. A third is to surround the supercontainers by clay mud that provides the dense buffer with water from start and supports the surrounding rock when the thermal pulse begins to raise the rock stresses. A fourth is to replace the proposed smectite-rich buffer by clay with higher chemical stability and lower but sufficient expandability. A possible fifth change can be to manufacture homogeneous copper canisters of HIPOW type, which would radically reduce the risk of contamination of groundwater by released radionuclides.